Products: 1 - 2 of 2
Page:
1
I have the 2.5 gallon Seaward Propane Locker but am missing the properly sized tank. Is it possible to convert this unit to accommodate the composite Ragasco Propane tank you have recently introduced?
Submitted by: mort
Answer
The Ragasco 5Kg Clear View Fiberglass Propane Tank which holds approximately 3 gallons should fit in the Seaward propane locker. The Ragasco Propane Tank dimensions are 15.24" Tall and it has a 12" Diameter.
I need 1000 gallon LPG Horizontal Tank (16’ x 41’’). Answer We do not stock Propane tanks that size. That commercial tank is available for residential and commercial use at any large propane supplier.
Submitted by: Lesly Grandin
I presume the vent line vent should lead out no higher than the bottom of the tank and a fitting needs to fitted to the side of the boat hull to accomodate the vent tube. Do your offer an appropriate fitting, if not what is the i.d. of the hose where it would attach. Answer Here is what you need to know; propane as a gas, sinks. The easy way to make this vent is to put a 1/2" Thru Hull in the bottom of the box and install another 1/2" Thru Hull below the height of the box, through the hull of the vessel. The thru hull on the side of the boat is an above waterline but below the propane locker exit. Lastly, connect the two thru hulls with reinforced hose and clamps. Remember, vent in bottom of locker gets connected to a lower thru hull for draining the propane gas in the case of a leak.
Submitted by: Richard
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
Post a question or comment to our Scuttlebutt Corner and you will automatically be entered into our monthly drawing.
Winners will receive a $25 Go2marine Gift Certificate.
Make sure to enter in your email address so that we can contact you. (We keep your email address private.)
|
|
|