|
|
|
Mfr.
CQR
CQR Galvanized Plow Marine Anchors are drop forged high-tensile steel. CQR Marine Anchors hold in sand, pebble, rock, grass, kelp and coral...
|
$402.47
-
$2,570.14
|
|
Mfr.
CQR
CQR Stainless Steel Marine Plow Anchors are polished stainless steel. CQR Marine Anchors hold in sand, pebble, rock, grass, kelp and coral...
|
$3,354.80
-
$10,165.95
|
|
Mfr.
Danforth
Patented Deepset II Anchors have been developed through a combination of exhaustive field testing, computer enhanced design, and state-of-the art laser manufacturing techniques. Features very high...
|
$138.02
-
$1,658.26
|
|
Mfr.
Danforth
Hi-Tensile Marine Boat Anchors are hot dipped galvanized. Drop froged shank.Danforth's toughest and most durable anchors. Features very high holding power...
|
$151.72
-
$2,545.96
|
|
Mfr.
Danforth
Each Standard Marine Anchor's shank is made of high strength steel. Strong and wide flukes. These anchors are hot dipped galvanized coating for long-lasting protection...
|
$33.47
-
$530.83
|
|
Mfr.
Dutton-Lainson Company
Marine Small Boat Anchor Kit. Recommended for Boats 24 ft in clean bottoms (sand/mud) and varying surf and wind conditions. Kit contains:8 pound Anchor...
|
$127.06
-
$208.08
|
|
Mfr.
Fife Forge Anchors
Kedge Marine Anchors flukes are forged and tapered.Black asphalt paint finish. Break-away bar for convenient rigging. These anchors are commonly used for securing longlines and set nets...
|
$86.40
-
$188.03
|
|
Mfr.
Forfjord Anchors
Spread wing flukes (right degree angle) prevent pullout. Easily broken from its hold by a simple heave of the line. Designed to go down fast to the bottom without tangle...
|
$631.74
-
$2,400.00
|
|
Mfr.
Fortress Anchors
Fortress Anchors are made with Ultra Hi strength aluminum - Anodized finish. They can be dissasembled to store flat- Great for a back up or stern anchor.Precision-machined from an aluminum alloy...
|
$117.22
-
$913.69
|
|
Mfr.
Joslin
Screw Marine Anchors, Securing Ground Shore Anchor. Hot-dipped galvanized Screw Marine Anchors install manually or with power driven equipment. Anchors are commonly used for permanent mooring...
|
$64.00
-
$90.00
|
|
Mfr.
Lewmar
Claw Galvanized Marine Anchors set quickly and easily. High holding power on short scope in a wide variety of conditions, fashioned after the Bruce anchor...
|
$39.99
-
$532.70
|
|
Mfr.
Lewmar
Claw Stainless Steel Marine Anchors set quickly and easily. High holding power on short scope in a wide variety of conditions, fashioned after the Bruce anchor...
|
$73.80
-
$581.83
|
|
Mfr.
Lewmar
Delta Plow Galvanized Marine Anchors are made of high-grade manganese steel. Unique shank profile and ballasted tip. Self Launching. Low center of gravity self-righting geometry ensure an immediate...
|
$98.03
-
$3,347.00
|
|
|
Mfr.
Lewmar
Delta Plow Stainless Steel Marine Anchors are made of high-grade manganese steel. Unique shank profile and ballasted tip. Self Launching. Low center of gravity self-righting geometry ensure an...
|
$671.83
-
$4,957.50
|
|
Mfr.
Plastimo
Folding Grapnel Marine Anchors stow neatly. No sharp points to cause injury or boat damage. Weighted shank ensures a quick set. Hot dip galvanized for maximum corrosion resistance...
|
$8.87
-
$71.61
|
|
Mfr.
Plastimo
Manta Marine Claw Anchors remain stable under varying tide and wind conditions. Exceptional holding power in a variety of seabeds. Sets and resets quickly...
|
$20.71
-
$1,939.84
|
|
Mfr.
Sea-Dog
Sea-Dog, Folding Grapnel Marine Anchors. Perfect for use as a back-up for larger boats or as a primary anchor for smaller boats...
|
$22.32
-
$57.20
|
|
Mfr.
Sea-Dog
Sea-Dog, Mushroom Anchors, Cast Iron. Anchors are coated in black vinyl...
|
$19.75
-
$45.30
|
|
Mfr.
Sea-Dog
Sea-Dog, Navy Anchor, Cast Iron. Coated in aluminum paint....
|
$23.00
-
$73.50
|
|
Mfr.
Washington Chain Anchors
Traditional fisherman style boat anchors. These anchors hold well in rock and will penetrate through kelp to get to the bottom. Black asphalt finish...
|
$45.45
-
$269.23
|
|
Mfr.
Washington Chain Anchors
Workboat Anchor provides excellent holding power in sand or mud bottoms. Working anchor for numerous offshore vessels...
|
$96.15
-
$5,250.00
|
|
Part#
218472 |
Mfr.
Forfjord Anchors |
Mfr#
6
|
$933.10
|
|
|
Mfr.
Fortress Anchors
|
$187.73
-
$1,870.87
|
|
|
Mfr.
Fortress Anchors
|
$204.10
-
$552.50
|
Products: 1 - 24 of 33
What is the diameter of the mushroom for #10 anchor? Submitted by: Bob
Answer
Do you still have any smaller Forfjord anchors, like the one in the catalogue, model# FOR2 which is 24 lbs.? And at what cost? Thank You Answer We contacted Forfjord and they quit making the 24 lb. anchor many years ago. Submitted by: Sam
Do the old 25# Navy Anchors have any collector interest? These are galvanized cast iron that I refer to. Thanks Answer: Not likely - but if you are in an area (like Montana) where there are none, they might have use and value as lawn art. Submitted by: Tobias
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
Post a question or comment to our Scuttlebutt Corner and you will automatically be entered into our monthly drawing.
Winners will receive a $25 Go2marine Gift Certificate.
Make sure to enter in your email address so that we can contact you. (We keep your email address private.)
|
|
|
|
Got questions about 
Scuttlebutt Corner 
