|
|
Ask. Answer. Discuss...Post a question or comment about Pot Pullers.
|
Mfr.
Quality Products Northwest Crab & Shrimp Pot Pullers
Light Commercial model Safe~T~Puller electric pot pullers with a 300lb pull mounted to a sturdy schedule 80 aluminum davit...
|
$1,179.91
-
$1,768.69
|
|
Mfr.
Quality Products Northwest Crab & Shrimp Pot Pullers
Alaska model Safe~T~Puller electric pot pullers with a 200lb pull mounted to a sturdy schedule 80 aluminum davit...
|
$956.43
-
$1,500.07
|
|
Mfr.
Quality Products Northwest Crab & Shrimp Pot Pullers
Sports Model Safe-T-Puller Electric Pot Pullers - 100 lb Pull. Sports model Safe~T~Puller electric pot pullers with a 100lb pull mounted to a sturdy schedule 80 aluminum davit...
|
$907.72
-
$1,325.84
|
|
Mfr.
McKay Shrimp & Crab Gear
Honda 4 hp OHV Gas Pot Puller with Davit and Pulley. Honda 4 hp overhead valve gas engine with davit and pulley. Quiet 4 cycle economy and operation. Solid state ignition one pull start...
|
$606.11
-
$1,131.40
|
|
Mfr.
Quality Products Northwest Crab & Shrimp Pot Pullers
Safe-T-Hauler gives you the highest quality pot puller / gear hoist designed for the recreational & light-commercial shrimp, crabber & lobster fisherman. Use Safe-T-Hauler for diving operations...
|
$1,667.24
-
$2,055.51
|
|
Mfr.
Ace Line Hauler
| Mfr No. Brutus
Ace Line Hauler, the "Brutus plus 40", Pot puller hauls prawn or crab traps with a simple one person operation. Powered by a Hi-Torque 12v Motor, Ace Line Hauler Brutus can lift up to 100 pounds...
|
Sale Price From
$559.97
|
|
Mfr.
Powerwinch
| Mfr No. P77769
200 lbs maximum pulling rate. 5/8" maximum line size. 150 ft/min retrieval speed. 80 amp thermal re-setting curcuit breaker. Stai...
|
$562.27
|
|
Mfr.
Quality Products Northwest Crab & Shrimp Pot Pullers
Handy Hauler Manual Pot Puller. Your arms do the work and the block and Davit pipe save your back. Can be upgraded with electric powerhead at a later date...
|
$266.04
-
$384.45
|
|
Mfr.
Thomas Machine & Foundry
| Mfr No. PPIA
Pocket Puller Manual Hauler, fits Oarlock. Easy to use and the right size for hauling a crab pot into your rowboat or dinghy. Allows the hauler to keep thier balance. Features built in jam cleat...
|
$52.65
|
|
Mfr.
McKay Shrimp & Crab Gear
| Mfr No. Folbe Block Only
Folbe Pulley, Block ONLY...
|
$48.52
|
|
Mfr.
McKay Shrimp & Crab Gear
| Mfr No. GX120 Aluminum Capstan Only
GX120 Aluminum Capstan Only for 3/4" straight shaft...
|
$70.81
|
|
Mfr.
McKay Shrimp & Crab Gear
| Mfr No. Gunnel Bracket ONLY
Gunnel Mount Bracket ONLY...
|
$44.59
|
|
Mfr.
McKay Shrimp & Crab Gear
| Mfr No. Kickplate Bracket ONLY
Kickplate Bracket ONLY...
|
$30.27
|
|
Mfr.
McKay Shrimp & Crab Gear
| Mfr No. Gas Davit w/brkts & pin
Schedule 80 Davit, includes Davit, Kickplate & Gunnel Mounts ONLY...
|
$258.89
|
|
Mfr.
Quality Products Northwest Crab & Shrimp Pot Pullers
Affordable worm-drive gear pot puller for the recreational Sporstman.
|
$1,470.26
-
$1,690.80
|
|
Mfr.
Scotty
Crab pot puller used in Scotty mounts 241 or 244. Aids in lifting heavy crab pots.
|
$37.87
-
$43.35
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 16 of 16
|
Page:
1
|
Post a question or comment about Pot Pullers to our online boating community.
Can you mount the GX120 Aluminum Capstan to the motor without a gear reduction?
Submitted by: adam
If you mount the GX120 Aluminum Capstan without the gear reduction it will be spinning the same speed as the engine: which will be to fast.
Do you have replacement power head for the Alaska Sports Model Safe-T-Puller?
Do you have the replacement power head for the Alaska Sports Model Safe-T-Puller? Submitted by: Garnet
What size shaft will capstan gx120 accept?
What size shaft will capstan gx120 (crab pot puller) accept? Submitted by: dale
light commercial pot hauler
What is the longest continuous pull the electric motor can perform before overheating and how long does it need to rest between maximum pulls? Submitted by: scott stevenson
They are not continuous duty electric motors.
8-10 minutes of continuous operation is about maximum - standard pulls are 300-600 feet. How long the motor takes to cool down is dependent upon the environment.
They work well for guys in Alaska (deep water) pulling shrimp.
If you are looking for continuous duty, you need to look at a hydraulic pot pulling option.
I would like to know what gear motor to use on my crab pot puller.
I would like to know what gear motor to use on my crab pot puller. Submitted by: mike
You will need to tell me a bit more about the setup…
Are you asking what reduction gear you would use for a gas motor to run a capstan? Are you asking about what hydraulic motor you would use?
Show older >>
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
