|
|
Go2marine sells Teleflex complete boat steering systems as well as parts to make your own system or repair you existing aging system. Whether you are looking for helm pumps, steering cylinders or rebuild kits for either, you will find that we carry a good selection of Teleflex, Hynautics, Vetus, Wagner parts to finish or maintain your vessel.
|
Mfr.
Teleflex Morse
| Mfr No. K-5-B
Hynautics steering cylinders K1B, K1C, K2B, K2C, K3B, K3C, K4B, K4C, K5, K8 and K9 are manufactured by Teleflex. Please see the chart below for your size and the replacement...
|
$698.12
|
|
Mfr.
Teleflex Morse
| Mfr No. K-6NI
The Hynautic K6 steering cylinder is still available through Teleflex...
|
$641.11
|
|
Mfr.
Teleflex Morse
| Mfr No. K-22
The Hynautic K22 steering cylinder and the Hynautic K27 steering cylinder are still available through Teleflex. The Hynautic K28 steering cylinder has been replaced with the Teleflex K27...
|
$686.47
|
|
Mfr.
Teleflex Morse
The Hynautic K31 and the K33 steering cylinders are still available through Teleflex...
|
$843.08
-
$843.08
|
|
Mfr.
Teleflex Morse
The standard replacement hlm for the SeaStar / Capilano hydraulic helms for the complete system HK63XX. The 1.7 is the helm that comes stock with the system when ordered...
|
$408.45
-
$565.79
|
|
Mfr.
Teleflex Morse
| Mfr No. HH6191
Built for the SeaStar hydraulic helm, this 1.7 Sport helm pump turns your system into a tilt wheel system or is a replacement helm pump for the HK63XX...
|
$748.65
|
|
Mfr.
Teleflex Morse
Hynautic 20 Series Hydraulic Helm Pumps are now manufactured by Teleflex as direct replacement helm pumps for your older 20 Series pumps. Teleflex now has complete replacement systems...
|
$724.19
-
$810.96
|
|
Mfr.
Teleflex Morse
Hynautic 40 Series Hydraulic Helm Pumps are now manufactured by Teleflex as direct replacement helm pumps for your older 40 Series pumps. Teleflex now has complete replacement systems...
|
$1,201.43
-
$1,377.11
|
|
Mfr.
Teleflex Morse
| Mfr No. HK4200A
The BayStar Hydraulic steering system is ideal for small boats, including inflatables and runabouts with small to medium single outboard powered engines to 125 horsepower...
|
$614.97
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5513
SeaStar Bulkhead Fitting Kit accomidates bulkheads up to 3" thick, allowing 1/2" copper tubing or 3/8" nylon to connect up to the HF5513 fitting on both sides of the bulkhead...
|
$76.31
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5526
Tube Nuts For SeaStar Hydraulic Steering System. These 3/8" compression fittings utilize a 9/16"-24 extra fine thread for use with 3/8" copper tubing. 6 per package...
|
$20.16
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5534
Fits Seastar hydraulic steering systems, 90 degree with 3/8" NPT and 3/8" Hose. 3 per package...
|
$22.07
|
|
Mfr.
Teleflex Morse
Union Couplings for the SeaStar Hydraulic 3/8" tubing. HF5527 for copper tube and HF5528 for nylon tubing. 3 per package...
|
$16.55
-
$20.16
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5520
All SeaStar Manual Hydraulic steering cylinders utilize the same style of fittings for all applications. This Horizontal Bleeding Tee utilizes 3/8" fittings...
|
$58.71
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5471-2
Hydraulic Liquid Tie Bar Valve, HA5471-2The SeaStar cylinder allows for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar...
|
$281.13
|
|
Mfr.
Teleflex Morse
Used for Hynautic steering systems requiring 5/16" nylon tubing; tube nut, o-ring, lock ring, insert, 1/4" coupling and adapter each sold separately...
|
$5.08
-
$7.44
|
|
Mfr.
Teleflex Morse
| Mfr No. HC5373
Inboard Hydraulic Steering Cylinder for boat to 70 feet and up - HC5373. The Teleflex replacement for the Hynautics K-2-B/C and for the discontinued Telefelx Part # HC5373HY and HC5373HYC...
|
$747.35
|
|
Mfr.
Teleflex Morse
The SeaStar inboard steering cylinders fit most inboard powered boats with single or dual engines from 26-50 feet...
|
$428.53
-
$802.95
|
|
Mfr.
Teleflex Morse
| Mfr No. SH91526P
NFB Performance Tilt Helm - SH91526P. Delivering unsurpassed comfort and safety from a mechcanical steering system the NFB 4.2 suits outboard power boats up to V6. Replaces standard...
|
$195.63
|
|
Mfr.
Teleflex Morse
The SeaStar No FeedBack 1.7 steering system is designed for single and twin nonpower-assisted outboard engines up to 300HP, cruisers, runabouts, offshore fishing boats and more...
|
$953.32
-
$1,199.47
|
|
Mfr.
Teleflex Morse
The Front Mount steering cylinder is designed for single and twin nonpower-assisted outboard engines up to 300HP, cruisers, runabouts, fishing boats and more. Suitable for speeds up to 60MPH...
|
$509.36
-
$619.25
|
|
Mfr.
Teleflex Morse
| Mfr No. HC5370HY
The SeaStar side mount replacement steering cylinder for single and dual nonpower-assisted outboard engines up to 300 HP that have standard engine tilt tube. Suitable for speeds up to 60 MPH...
|
$405.41
|
|
Mfr.
Teleflex Morse
| Mfr No. HC5342
SeaStar Outboard Steering Cylinder for single and non-power-assisted outboard engines up to 300HP that have standard ABYC standard engine tilt tube. The steering cylinder for the complete...
|
$871.12
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5450
Remote fill and vent Kit for the Teleflex Capalano Inboard Hydraulic Steering Helm, models HH5250 and HH5275...
|
$57.78
|
|
Mfr.
Teleflex Morse
The Sea Star Pro hydraulic helm pump is the heart of the SeaStar Pro Steering System, designed for high performance boats with single non-power-assisted outboards up to 350 H.P.
|
$447.83
-
$969.33
|
|
Mfr.
Teleflex Morse
The famous Capilano variable displacement helm allows the number of steering wheel turns to be adjusted by the helmsman with-in a pre-determined range, simply by turning a knob...
|
$940.01
-
$1,088.57
|
|
Mfr.
Teleflex Morse
SeaStar (Capilano) Dual Cylinder Hose Kit - for HH5250 and HH5275...
|
$38.66
-
$41.11
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5418
Reduces helm protrusion by thickness of dash and allows clean retrofit of the SeaStar helm. Can be used where pre 1991 SeaStar, SyTen and mechanical rotary steering systems has been used...
|
$38.15
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5731
Hose kit for SeaStar Capilano inboard steering system. This hose kit contains two (2) 18" (.45m) hoses for single-cylinder installations...
|
$69.43
|
|
Mfr.
Teleflex Morse
| Mfr No. HO6001
This fits Teleflex Morse hydraulic steering system HK63XX...
|
$363.73
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5508
The use of Teleflex Adapter Hose Kit HF5508 for SeaStar brass cylinders is required. Copper tubing can also be used on outboard powered boats with SeaStar brass inboard cylinders in conjunction...
|
$83.44
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5430
SeaStar Hydraulic steering systems require the use of a special high quality hydraulic fluid. Meets MIL SPEC H-5606. This fluid is available in 1 litre bottles...
|
$27.64
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5419
SeaStar 20 Degree Dash Mounting Wedge to change the mount angle of your SeaStar Helm Pump for better steering wheel angle...
|
$73.12
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5432
Non-Vent Helm Pump Plug HA5432 must be used on all SeaStar Helm Pumps other than uppermost Helm Pump on multi steering station systems. This Non-Vent Plug is supplied with additional...
|
$13.22
|
|
Mfr.
Teleflex Morse
| Mfr No. PA1200-2
SeaStar Power Assist Steering System, PA1200...
|
$1,588.45
|
|
Mfr.
Teleflex Morse
| Mfr No. HS5157
Seal Kit SeaStar Outboard Steering Cylinders, HC5345, HC5340, HC5347, HC5348 and HC5358...
|
$111.94
|
|
Mfr.
Teleflex Morse
| Mfr No. HH6190
Teleflex Seastar Pro Helm 2.0 Tilt - HH6190. Delivering unsurpassed comfort and safety from a mechcanical steering system the NFB 4.2 suits outboard power boats up to V6. Replaces standard...
|
$728.72
|
|
Mfr.
Teleflex Morse
Hose Kits for the Teleflex SeaStar Hydraulic Steering Systems. Each kit contains 2 hoses of equal lengths for your SeaStar application. For the HK63XX and the HK64XX Complete SeaStar...
|
$110.03
-
$266.84
|
|
Mfr.
Teleflex Morse
The SeaStar stern drive steering cylinders are made for the SeaStar Premium stern drive steering system. Ideal for most stern drives and is suitable for single and multiple drives and...
|
$402.99
-
$511.47
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5538
Fits Seastar hydraulic steering systems, 90 degree. 3 per package...
|
$23.07
|
|
Mfr.
Teleflex Morse
| Mfr No. SB27265P
Teleflex Big-T Black Bezel Kit, 90 / 20 Degree, fits Big T Rotary Steering helm...
|
$133.76
|
|
Mfr.
Teleflex Morse
The Commercial Hydraulic Helm is specifically designed to be used on smaller fishing vessels in the Lobster and Crabbing fisheries. Commercial Helm Pumps are designed with a stainless steel...
|
$529.56
-
$656.31
|
|
|
Mfr.
Teleflex Morse
| Mfr No. HK6400TS
The SeaStar No FeedBack Tilt Helm 1.7 Sport steering system is designed for single nonpower-assisted outboard engines up to 350HP, cruisers, runabouts, offshore fishing boats and more...
|
$1,209.39
|
|
Mfr.
Teleflex Morse
Behind dash mounting configuration. 1.7 cubic inch displacements. Top of dash fill point. Complete with elbow fittings...
|
$477.31
-
$642.43
|
|
Mfr.
Teleflex Morse
| Mfr No. HH6541
Built for the SeaStar hydraulic helm, this 1.7 Traditional helm pump turns your system into a tilt wheel system or is a replacement helm pump for the HK63XX...
|
$637.35
|
|
Mfr.
Teleflex Morse
Teleflex, Fitting Kit, Seastar Capilano. Tubing fitting kit to install the SeaStar Capilano Inboard Steering System on your vessel...
|
$52.55
-
$52.60
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5521
All SeaStar Manual Hydraulic steering cylinders utilize the same style of fittings for all applications. This Vertical Bleeding Tee utilizes 3/8" fittings...
|
$57.31
|
|
Mfr.
Teleflex Morse
To add a second station to the Teleflex SeaStar Inboard, Outboard or Sterndrive Hydraulic Steering System. For 3/8" copper tubing or 3/8" nylon hose...
|
$59.25
-
$115.39
|
|
|
Mfr.
Teleflex Morse
| Mfr No. 436627
Adjusting Nut and Screw for the Teleflex Standard Front Mount Cylinder HC5342...
|
$10.37
|
|
Mfr.
Teleflex Morse
| Mfr No. HT4420
BayStar Outboard Hydraulic Tubing Kit - HT4420. Hydraulic Tubing Kit for the Teleflex BayStar Hydraulic Steering System, complete with two 20 foot lengths of tubing...
|
$121.48
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about Hydraulic Steering for Boats to our online boating community.
How do I identify the model number of the piston that connects the rudders of the boat.
How do I identify the model number of the piston that connects the rudders of the boat. Submitted by: ronald
Normally there is a tag or the numbers stamped into the hydraulic cylinder. If you can’t find any identification, send us pictures and the dimensions of the rod and the cylinder barrel.
Capilano fluid
I just bought a 1275 capilano helm pump to replace a seastar pump. Mainly to reduce the number of turns. It called for seastar fluid before but I see now that capilano calls for dextron II is that correct? I wouldn’t want to damage the new pump. Submitted by: animalduck
Both will work, Capilano calls for ATF as the helm can be dialed down to accomodate for the heavier effort that ATF will lead to… SeaStar helms cannot.
Seastar steering helm in a 1996 Nitro 986
I have a 1996 Nitro 986. I need to replace the seals in the steering helm (Seastar mod. #HH5770)I am trying to find a blow-up diagram of the helm. Submitted by: hesscat
I have a 1996 Nitro Savage with a 200 H. P. Mercury
I have a 1996 Nitro Savage with a 200 H. P. Mercury. What kind of oil does the front steering helm use? Submitted by: hesscat
I need to replace the o-ring of a Seastar Kevlar hydraulic hose HO5706
I need to replace the o-ring of a Seastar Kevlar hyd hose HO5706 connecting a 5345 Cylinder with a 5770 helm. Do you carry the o-ring or otherwise which would be the appropriate kit and its price? Submitted by: Alejandro
Your local hydraulics repair facility should have an o-ring available. Also try NAPA.
Show older >>
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
