|
|
Ask. Answer. Discuss...Post a question or comment about Hydraulic.
|
Mfr.
Hynautic / Teleflex
| Mfr No. SS-04
Transmission Slave Control, Hynautic. Hynautic hydraulic controls deliver positive, synchronized commands to engines and transmissions. Slave units deliver up to 120 inch-pounds...
|
$461.37
|
|
Mfr.
Teleflex Morse
| Mfr No. ST-06
ST-06 Throttle Slave, Hynautic Hydraulic Control. Hynautic hydraulic controls deliver positive, synchronized commands to engines and transmissions...
|
$545.60
|
|
Mfr.
Hynautic / Teleflex
Bent Handle Assembly, Fits Hynuatic CL-B4 & CR-B4. Replacement control handle for the Hynuatic CL-B4 and CR-B4 sender...
|
$79.18
-
$89.21
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. CDF-04
For use with Hynautic engine control sending assemblies. This plate facilitates mounting a left and right hand sender unit side by side for a twin lever control unit. 1/8...
|
$35.41
|
|
Mfr.
Hynautic / Teleflex
Engine Control Sender Assembly, Black or Red. Hynautic hydraulic controls deliver positive, synchronized commands to marine engines and transmissions. The sending unit delivers...
|
$525.03
-
$573.33
|
|
Mfr.
Hynautic / Teleflex
Engine Control Sender Bodies, Left or Right. Body for sender assemblies...
|
$130.71
-
$130.71
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. 160011
Engine Control Sender Dill Valve. Part of the plunger assembly of a Hynautic engine control sender...
|
$9.11
|
|
Mfr.
Hynautic / Teleflex
Engine Control Sender Lever Balls, Red or Black. Replacement ball ends for sender assembly control levers. Comes in red and black, 1 7/8" ball with 3/8" threaded hole...
|
$14.00
-
$14.00
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. ECS-05
Engine Control Sender Seal Kit. Seal Kit for Hynautic engine control sender...
|
$38.72
|
|
Mfr.
Hynautic / Teleflex
Engine Control Sender T Handle Lever Assemblies. Control lever with T handle in red or black...
|
$101.38
-
$101.38
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. MSV21
Hynautic Relief Valve - 950psi...
|
$192.43
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. SSF04
Hynautic Shift Slave Fittings, SSF04...
|
$96.57
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. STV-10
Lock-Out Valve. Used in conjunction with the ST-04 throttle slave on Hynautic engine control systems...
|
$119.20
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. MCV04
MCV-04 Charging Valve. A remote charging valve for use with the Hynautic R-04 reservoir on Hynautic engine control systems...
|
$214.19
|
|
Mfr.
Hynautic / Teleflex
Pressure Gauges, for Use on Hynautic Engine Control System Reservoirs. For use on Hynautic engine control system reservoirs. Two styles, from 0 to 100 PSI, or 0 to 60 PSI...
|
$30.16
-
$42.17
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. 850081
Spring Bungee-Ball Joint Assembly...
|
$80.34
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. ECS-06
Throttle & Shifter Slave Seal Kit...
|
$43.78
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. 630044
Transmission / Throttle Slave Bushing. Used on Hynautic transmission and throttle slave assemblies...
|
$14.29
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. 520014
Transmission Slave / Sender Plate. Used on Hynautic transmission slave and sender assemblies...
|
$5.88
|
|
Mfr.
Parker Hannifin
Fire Resistant Marine Fuel and Engine Hydraulic Hose, 221FR. Made of fuel and oil-resistant synthetic rubber tube, one braid of high-tensile steel wire, and oil, weather and fire resistant...
|
$9.33
-
$18.06
|
|
Mfr.
Parker Hannifin
High Pressure, 2 Wire, World Wide Hydraulic Hose, 302. Universal two-wire construction hydraulic hose designed to accommodate the global customer...
|
$2.88
-
$24.55
|
|
Mfr.
Parker Hannifin
Low Pressure Engine, Transportation Air and Hydraulic Hose, 206. Application: Petroleum base hydraulic fluids and lubricating oils, diesel fuels and antifreeze solutions...
|
$6.46
-
$21.13
|
|
Mfr.
Parker Hannifin
Medium Pressure, 1 Wire, World Wide Hydraulic Hose, 422. SAE 100R1 Type AT, made of synthetic rubber tube; One braid of high tensile steel wire reinforcement; MSHA accepted synthetic rubber cover...
|
$2.42
-
$13.87
|
|
Mfr.
Teleflex Morse
Used for Hynautic steering systems requiring 5/16" nylon tubing; tube nut, o-ring, lock ring, insert, 1/4" coupling and adapter each sold separately...
|
$5.08
-
$7.44
|
|
Mfr.
Teleflex Morse
| Mfr No. R-13
R-13 Reservoir With Integral Charging Valve. For use with Hynautic engine control systems. This reservoir includes an integral charging valve...
|
$786.19
|
|
Mfr.
Teleflex Morse
| Mfr No. ST-04
ST-04 Throttle Slave For Use W/External Lock-Out Valve. Throttle Slave for Hynautic engine control system utilizing the SV-10 lock-out valve...
|
$481.47
|
|
Mfr.
Teleflex Morse
Throttle / Transmission / Sender Bearing & Races. Bearing races used on Hynautic throttle, transmission slaves and senders. Bearing races sold as each...
|
$4.65
-
$8.75
|
|
Mfr.
Teleflex Morse
| Mfr No. 670010
Throttle/Transmission Linkage Ball Joint. The Ball Joint is used on the throttle or transmission arm as part of the linkage connecting to a Hynautic throttle or transmission slave assembly...
|
$28.47
|
|
Mfr.
Teleflex Morse
| Mfr No. 500131
Transmission / Throttle Slave Cylinder Tube. Used on Hynautic transmission and throttle slave assemblies...
|
$45.97
|
|
Mfr.
Teleflex Morse
Transmission Slave Neutral Detent Assembly Parts. Used on Hynautic transmission slaves to provide for a positive stop at neutral...
|
$6.42
-
$29.04
|
|
Mfr.
Teleflex Morse
| Mfr No. 740018
Transmission Slave / Sender Washer. Used on Hynautic transmission slaves and sender assemblies...
|
$5.82
|
|
Mfr.
Filtration Products Corp.
| Mfr No. SE 30 / ST30
- Nylon or steel nut cap
- Used in fluid reservoirs or sumps
- Flows to 100 gpm (378 lpm)
- 1/2" to 3" NPT
- Has stainless steel pleated medi
...
|
$37.59
|
|
Mfr.
Hynautic / Teleflex
3/8" OD Nylon Tubing, Unplasticized. Use for Hynautic engine control systems. Nylon tubing expands at a similar rate as the Hynautic fluid compensating for the inevitable fluid expansion...
|
$71.17
-
$191.46
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. HP6040
Fill Plug w/Air Valve Kit, HP6040. Replacement fill plug/air valve assembly kit for the Hynautic hydraulic control systems reservoirs...
|
$61.86
|
|
Mfr.
Hynautic / Teleflex
Filter and Element for R04 Reservoir. Fits Hynautic Model R04 Reservoir...
|
$15.09
-
$35.68
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. MCVF-08
Hynautic Charge Valve Kit, MCVF-08...
|
$118.71
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. CF04
Nylon Tube Fitting Kit, CF04. Nylon fitting kit for Hynautic controls...
|
$19.64
|
|
Mfr.
Hynautic / Teleflex
Reservalve Assembly. The reserve valve combines the function of the reservior and relief valve into a single component. Relief valve is factory set at either 500 or 950 psi...
|
$475.51
-
$475.51
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. RS01
Service Kit For Hynautic Reservoirs, RS-01...
|
$44.20
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. STF-12
Slave Cylinder Fitting Kit. Hynautic Slave Cylinder Kit...
|
$125.11
|
|
Mfr.
Marelco
| Mfr No. MRLGLYCL
Glycol fluid for use with the Hynautic hydraulic engine controls.
|
$39.31
|
|
Mfr.
Parker Hannifin
Nylon tubing for use with low pressure hydraulic steering systems. 5/16" and 3/8" hydraulic tubing sold by the foot...
|
$1.39
-
$2.42
|
|
Mfr.
Permatex
| Mfr No. 54540
Pneumatic Or Hydraulic Sealant, 36 Milliliters is designed for locking and sealing high pressure hydraulic and pneumatic systems, Pneumatic/Hydraulic Sealant contains no
|
$38.38
|
|
Mfr.
Sierra
| Mfr No. STF-10
Hynautic, Nylon Tubing Fitting Kit ST-04. Hynautic’s Slave Cylinder Fitting Kit for ST-04 works with the Hynautic slave units to deliver up to 120 inch-pounds of torque...
|
$175.00
|
|
Mfr.
Sierra
Teleflex Morse, Modulator Valve Kit. This service parts kit for modulator from Teleflex Morse includes all internal parts, gaskets and housing.
|
$20.42
-
$43.15
|
|
Mfr.
Sierra
| Mfr No. HO6700
|
$282.72
|
|
Mfr.
Sierra
|
$911.58
-
$961.53
|
|
Mfr.
Teleflex Morse
| Mfr No. MCVF05
Charge Valve Fitting, Replaces: MCVF-04. Hynautic charge valve fitting...
|
$67.80
|
|
Mfr.
Teleflex Morse
| Mfr No. MCEF04
Hynautic MCEF04 Spare Parts Kit...
|
$60.22
|
|
Mfr.
Teleflex Morse
| Mfr No. HA54452
The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering f
|
$895.77
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about Hydraulic to our online boating community.
Engine controls
I am rebuilding my Hynautic controls and need to know what kind of grease is used on the internal gears.
Submitted by: Cliff
Any good grease will work fine for the internal gears.
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|