|
|
|
Mfr.
Davis Instruments
| Mfr No. 425
This Lube II lubricator's unique design with an oil seal and a grease (zerk) fitting helps keep moisture and contaminants out while enabling you to pour or pump several types of lubricant in...
|
$25.95
|
|
Mfr.
Fafnir
| Mfr No. 60BTL20
Steel Sprockets for building your own chain / cable steering system or to replace your worn Number 60 sprockets. 12, 14, 16, 18 and 20 tooth sprockets with 3/4" pitch...
|
Request Availability
|
|
Mfr.
O.M.C.
| Mfr No. 0173699
OMC Steering Link Arm, complete package with nuts, washers and bolt...
|
$84.46
|
|
Mfr.
Teleflex Morse
| Mfr No. 1-CA27247P
400A Hi-HP Connection Kit, 1-CA27247P. For Johnson/Evinrude over 35hp. 1973-1978 OMC OEM "400" Cables with bare wire ends...
|
$21.60
|
|
Mfr.
Teleflex Morse
Teleflex Back Mount Rack 20 Degree Wedge Kit fits the SS141 Teleflex Steering System. The Back Mount Rack 20 Degree Wedge Kit changes the angle of the Back Mount Rack Helm Unit, SH5210P to a more...
|
$18.36
-
$22.16
|
|
Mfr.
Teleflex Morse
| Mfr No. SH5210P
As a replacement, use the Teleflex Back Mount Rack Steering Helm Unit, SH5210P for the SS141 steering system...
|
$62.72
|
|
Mfr.
Teleflex Morse
| Mfr No. SH91610P
Tilt helm unit for the Teleflex "Back Mount Rack" mechanical steering system, SS141. To complete the Tilt Steering you will also need part SH91500P...
|
$89.07
|
|
Mfr.
Teleflex Morse
| Mfr No. HA4642
Baystar Cylinder Pivot Plate, HA4642...
|
$82.04
|
|
Mfr.
Teleflex Morse
| Mfr No. SH5000P
Replacement helm for the Inboard Big-T Single Station or to add a second station. This is a single helm unit, SH5000P for the Big-T Inboard Steering System...
|
$234.57
|
|
Mfr.
Teleflex Morse
| Mfr No. SB39452P
Jet boat steering system bezel and mounting hardware for the Teleflex JBS steering system. Kit contains bezel and the attaching hardware to attach the SH5087 or SH5088P steering helm units...
|
$20.82
|
|
Mfr.
Teleflex Morse
Teleflex JBS is recommended for use in all jet boat applications powered by Mercury Sport Jet or OMC Turbo Jet drives up to 175hp. Uses a true steering cable...
|
$131.71
-
$134.36
|
|
Mfr.
Teleflex Morse
Mechanical Steering Connection Clamp Block used as a standoff from the transom for the steering cable outboard without tilt tubes...
|
$83.76
-
$126.81
|
|
Mfr.
Teleflex Morse
| Mfr No. 308561
20 Degree bezel mount for Morse Command 290 steering systems. Change the mounting angle of your Morse Command 290 steering helm...
|
$46.30
|
|
Mfr.
Teleflex Morse
| Mfr No. SH4910P
NFB 4.2 Steering Helm Unit, SH4910P is a replacement helm for the Teleflex SS147 Complete Steering System. Single Station Use only...
|
$128.47
|
|
Mfr.
Teleflex Morse
| Mfr No. SH91190P
For use with Teleflex Safe-T II Mechanical Steering System, SS132. The Tilt Helm Unit SH91190P requires the Tilt Mechanism SH91500P to make a complete tilt helm...
|
$133.02
|
|
Mfr.
Teleflex Morse
The Teleflex No FeedBack NFB Mechanical Steering Helms turn any Safe-T QC using the SSC-62 cable system into a No-Feedback by replacing them with the NFB steering helms...
|
$120.66
-
$216.95
|
|
Mfr.
Teleflex Morse
| Mfr No. SH91800P
Performance Tilt Mechanism is the second part to ANY of the Teleflex Tilt Helm Units. See below for the Tilt Helm applications...
|
$127.24
|
|
Mfr.
Teleflex Morse
Teleflex Morse Spent Travel Tube (Quick Connect) collects the cable that passes through the Steering Helm in a safe tube, for single cable steering systems, including NFB Safe-T II, NFB 4.2, HPS...
|
$9.38
-
$21.35
|
|
Mfr.
Teleflex Morse
| Mfr No. SH5094P
Safe-T QC Steering Helm Unit, SH5094P for the Safe-T QC Sterndrive Steering System, SS137. Single Helm Steering Station...
|
$69.09
|
|
Mfr.
Teleflex Morse
| Mfr No. SA35680P
Teleflex Morse Spent Travel Tube collects the cable that passes through the Steering Helm in a safe tube, for single cable steering systems, including Teleflex Big-T, Safe-T QC and...
|
$8.93
|
|
Mfr.
Teleflex Morse
| Mfr No. SA27253P
Teleflex Steering Cable Support Kit for Outboard Splashwell Mounting. Universal for most outboards. Corrosion-resistant for 15 degree splashwells. Will work with any brand steering system...
|
$137.88
|
|
Mfr.
Teleflex Morse
| Mfr No. SA36316P
Splashwell Threaded Tube w/ Ball, SA36316P...
|
$40.65
|
|
Mfr.
Teleflex Morse
Threaded Steering Support Tube for Teleflex Mechanical Cable Outboard Steering Systems, Aluminum or Stainless Steel...
|
$23.56
-
$76.56
|
|
Mfr.
Teleflex Morse
| Mfr No. SB27265P
Teleflex Big-T Black Bezel Kit, 90 / 20 Degree, fits Big T Rotary Steering helm...
|
$133.76
|
|
Mfr.
Teleflex Morse
| Mfr No. SB39544P
No-Feedback Rack Black Bezel Kit. Fits standard SH5230P Rack & Pinion No-Feedback Steering Helms...
|
$22.40
|
|
Mfr.
Teleflex Morse
| Mfr No. CA27321P
Teleflex OMC Connection Kit, CA27321P. Johnson / Evinrude, and OMC Pre-1979. For use with two 3300 type cables...
|
$31.80
|
|
Mfr.
Uflex
| Mfr No. S39
Clamp Block Steering Cable Support Assembly, S39. Clamp block assembly in marine aluminum and stainless steel...
|
$73.83
|
|
Mfr.
Uflex
| Mfr No. K25
Connection Kit For B47 & B49 Controllers to connect to C2, C8, MachZero, and all 33C style cables...
|
$10.21
|
|
Mfr.
Uflex
| Mfr No. K23
Kit To Connect C14 Cable To B47 Or B49 Control, K23...
|
$14.55
|
|
Mfr.
Uflex
| Mfr No. G86
Single Cable Rack Helm, G86, the helm used in the complete Racktech system...
|
$64.51
|
|
Mfr.
Uflex
| Mfr No. G96
Single Cable Rack Tilt Helm, G96, the helm used in the complete Racktech system...
|
$73.87
|
|
Mfr.
Uflex
X52 Tilt mechanism fits all Uflex helms, with a tilt range of 48 degrees and five locking positions, it is fast to connect and easy to install. Uflex Helms sold separately...
|
$86.69
-
$109.93
|
|
Mfr.
Uflex
| Mfr No. T72FC
Uflex Dual Cable, Standard Rotary Helm, T72FC uses a fast connect cable system and is made from corrosion resistant materials. This helm is particularly suitable for installations...
|
$125.06
|
|
Mfr.
Uflex
| Mfr No. T71FC
Uflex Standard Rotary Helm T71FC uses a fast connect cable system and is made from corrosion resistant materials. This helm is particularly suitable for instalations where clearance is limited...
|
$60.38
|
|
Mfr.
Uflex
Uflex X34 90 degree bezel mounting kit comes with black or white bezel, mounting bracket, and hardware including steering wheel shaft nut...
|
$19.98
-
$22.02
|
|
Mfr.
Uflex
| Mfr No. X35
Uflex X35 20 degree bezel mounting kit comes with black bezel, mounting bracket, and hardware including steering wheel shaft nut...
|
$22.61
|
|
Mfr.
Uflex
| Mfr No. T73FC
Zerotorque Rotory Helm, T73FC uses a patented non-reversible mechanism that eliminates the continuous load on the operator caused by the propeller torque, and is most suitable where clearance is...
|
$114.10
|
|
Mfr.
Uflex
| Mfr No. T83FC
Zerotorque Rotory Tilt Helm, T83FC, is a non-reversible single cable tilt helm that uses the X52 (sold separately) tilt mechanism and has a tilt range of 48 degrees...
|
$162.44
|
|
Mfr.
Dependable Machine Works
Steering Swivel Coupling with 90,000 psi manganese bronze body. Swivel Coupling made with #431 stainless steel thrust bearings...
|
$242.00
-
$314.46
|
|
|
Mfr.
Fafnir
Steel Sprockets for building your own chain / cable steering system or to replace your worn Number 50 sprockets. 12, 14, 15 and 16 tooth sprockets with 5/8" pitch...
|
Request Availability
|
|
|
Mfr.
Hynautic / Teleflex
| Mfr No. SA27590P
OMC Nozzle Connection Kit, SA27590P. Designed exclusively for jet boats! Teleflex JBS is recommended use in all boat applications powered by Mercury Sport Jet or OMC Turbo drives up to 175HP...
|
$53.52
|
|
Mfr.
O.M.C.
This is our custom assembled replacement kit for the obsolete OMC "thru transom steering" for older OMC sterndrives. The system uses replacable and recognized Teleflex Morse parts...
|
$392.16
-
$705.88
|
|
Mfr.
Sierra
| Mfr No. 308559
Sierra, Replacement Bezel Kit. Angle: 90°...
|
$31.25
|
|
Mfr.
Sierra
Teleflex Marine, Steering Connection Components. Replacement parts for steering systems...
|
$78.93
-
$89.20
|
|
Mfr.
Teleflex Morse
| Mfr No. SA27254P
90 Degree Splashwell Kit
|
$97.70
|
|
Mfr.
Teleflex Morse
| Mfr No. SH1535210
BM Rack Tilt Dash Module. Dash modules include helm, tilt mechanism, mounting hardware for helm/mechanism/steering wheel and instructions...
|
$178.77
|
|
|
Mfr.
Teleflex Morse
| Mfr No. 3953114P
Back Mount Rack Friction Device. The Teleflex 3953114P Back Mount Rack Drag Device is an optional friction device for 1996-Present "Back Mount Rack" helm units...
|
$29.75
|
|
|
Mfr.
Teleflex Morse
| Mfr No. SA27578P
Clamp Block, Ski Boat Inboard. 2-1/4" Stand-Off. Heavy Duty with Black Metal Flake Finish...
|
$86.65
|
|
Mfr.
Teleflex Morse
| Mfr No. SH5180P
Collet & hitch pin secure QC cable to helm. One bolt holds spent travel tube. Safe-T II cast finish helm has No FeedBack™ feature; HPS gold-finish helm does not
|
$142.21
|
|
Mfr.
Teleflex Morse
| Mfr No. SA27579P
Mechanical Steering Connection Clamp Block, Ski Boat Inboard, SA2757P used as a standoff from the transom for the steering cable (inboard model)...
|
$95.13
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about Steering - Mechanical Parts to our online boating community.
help
Hi I just bought a 16 ft steering cable for my boat a teleflex Ssc13416 unfortunately I didnt know it wouldn’t work with my helm. What helm do I need and do you stock it? Submitted by: matt
Second Station for single Mercury Outboard
I would like to add a second control station to our boat with a single mercury outboard. Our control is currently p/n 883711 A12. Can I add another dual control or would I be better to go with a two lever single function at both stations? Submitted by: Steven
You will need to change out both controls and all new cables. The engien controls will need to be single funtion and be compatible with a dual station set up. The link below will help you get started. Sierra CH5400 Twin SR Engine Control
Can I get the shaft that the steering wheel goes on?
Can I get the shaft that the steering wheel goes on? Mine is pitted and needs replacement. The unit still functions verry well. Submitted by: dave
You will need to replace the complete helm unit.
OMC Steering - 1973
Hi there, I need to replace the steering cable on my 1973 Seabird V24, with an OMC Sterndrive 225. The cable goes through the transom via a ball, and clamps onto the outside of the outdrive. I have a picture of the steering set up I can send you if that will help. Do you have this in stock? Many thanks, -Tom Submitted by: Hottub Tom
You will need to remove the complete system. All you use over is the clam shells to hold the ball. You get a new cable, helm unit, ball kit and steering wheel. Once you have removed the system you can measure the cable.
Gasket repair kit for my Baystar hydraulic steering system?
I have a leak on the port side of my Baystar hydraulic steering system. Where the ram comes out from the black housing. Do you sell the repair gaskets for them, teleflex says its HP5607(portside) Submitted by: billy
Show older >>
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
