|
|
|
Mfr.
Beckson Marine
| Mfr No. RS-18
Beckson Rain Shield for 8X18 Portlight, RS-18 for reducing rain into the open porlight as well as shading the portlight...
|
$32.95
|
|
Mfr.
Beckson Marine
Newport Ports - 310 are open ports which feature screens and a modern design to fit most modern vessels. Available in two body styles; Self Drain and Rain Drain models...
|
$100.82
-
$105.47
|
|
Mfr.
Beckson Marine
- All Beckson Opening Ports include
- screen
- exterior trim rings
- No corrosion, condensation, leaks
...
|
$122.73
-
$145.75
|
|
Mfr.
Beckson Marine
| Mfr No. PF100-SB
- One-piece construction for flat or curved surfaces
- Non-opening
- Patented
- Watertight
- Comes with black interior trim ring
|
$56.47
|
|
Mfr.
Vetus
Hand-polished and anodized aluminum frames. "Smoke" colored acrylic panes of 3/8" thickness. All Vetus Portholes install by clamping to hull surfac...
|
$45.07
-
$180.35
|
|
Mfr.
Vetus
Hand-polished and anodized aluminum frames. "Smoke" colored acrylic panes of 3/8" thickness. Portholes are clamped, not screwed.
|
$140.17
-
$159.14
|
|
Mfr.
Vetus
Hand-polished and anodized aluminum frames. "Smoke" colored acrylic panes of 3/8" thickness. Portholes are clamped, not screwed.
|
$188.26
-
$199.74
|
|
Mfr.
Vetus
Hand-polished and anodized aluminum frames. "Smoke" colored acrylic panes of 3/8" thickness. Portholes are clamped, not screwed.
|
$139.81
-
$199.16
|
|
Mfr.
Vetus
Vetus, PQ Porthole
|
$113.08
-
$133.71
|
|
Mfr.
Victory
| Mfr No. FS0006A
Chromed Brass
|
$413.51
|
|
Mfr.
Beckson Marine
| Mfr No. PO410WC10
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. S
|
$118.30
|
|
Mfr.
Beckson Marine
Beckson Replacement Knob Assemblies, White or Black Knobs...
|
$16.05
-
$16.05
|
|
Mfr.
Beckson Marine
| Mfr No. LNZ714C
Replacement Parts for Beckson Opening Ports
|
$50.35
|
|
Mfr.
Beckson Marine
| Mfr No. RS12
These rain shields may be fastened by screws or by bonding to the exterior trim ring of the opening ports. This will keep out rain and spray.. Proje
|
$26.57
|
|
Mfr.
Beckson Marine
| Mfr No. PO414-DWS-10
- Tight internal angle removes the need for an exterior water retention ledge
- Ideal for mounting where installation is within 15° of vertical
- Include
...
|
$145.75
|
|
Mfr.
Bomar / Pompanette
Bomar 2000 Series, Extruded Portlight, Opening and NON Opening. Anodized extruded aluminum frame. Available with Smoked acrylic (SA) or Clear acrylic (CA) lens.
|
Request Availability
|
|
Mfr.
Bomar / Pompanette
Molded Portlights, Gray Series. Gray Series portlights were factory fitted to many sailboats and powerboats of the 1970-1990 era...
|
$116.13
-
$182.08
|
|
Mfr.
Bomar / Pompanette
Bomar, Passage Series Portlights, Stainless Steel. No visible exterior screws, large viewing area...
|
$408.22
-
$408.22
|
|
|
Mfr.
Bomar / Pompanette
Bomar, Smoke Lens, Fits Grey Series, S616 Portlight...
|
$13.91
-
$63.75
|
|
Mfr.
Bomar / Pompanette
Bomar, Stainless Steel Port Holes, S516, w/ Screen. No visible exterior screws...
|
$290.29
-
$293.88
|
|
Mfr.
Bomar / Pompanette
| Mfr No. S616MBSS
Polished stainless steel. Friction hinge for opening in any position. Complete with outside finishing ring. Smoked acryl
|
$260.68
|
|
Mfr.
Lewmar
Stronger Aluminum Outer Frame with Single Welded Joint. The Atlantic Portlight has cl
|
$397.37
-
$560.74
|
|
Mfr.
Lewmar
Anodized Aluminum Frame. Lewmar's Standard Portlight is stylish, is easy to use, simple to install and competitively pri
|
$206.28
-
$316.89
|
|
Mfr.
Vetus
| Mfr No. PW30PBA
Vetus, PW Round Aluminum Porthole. Hand-Polished Aluminum. The PW Portholes are made of hand-polished, anodized aluminum...
|
$142.22
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 24 of 24
|
Page:
1
|
Post a question or comment about Ports for Boats to our online boating community.
Do you have an oval porthole with the dimensions of inside opening 6 X 14 approx?
Do you have an oval porthole with the dimensions of inside opening 6 X 14 approx? Submitted by: bev
Victory does make that series porthole with the below dimensions. Outside Dimensions 17" x 10-3/8"
Cutout 7-7/8" X 14-1/2"
Glass 6-3/4" x 13-3/8" There are close options with Bomar, Passage Series Portlights as well.
Deck Hatches on Post 46SF
I am looking for replacement deck hatches for my 1981 Post Sportfish. The raw opening size is approximately 19X19. Do you know what make and model I need ? Submitted by: Boyerca
There is not master list of the parts installed on a boat - except with each manufacturer. We do have a Deck Hatch that may work for your application.
I have port opening 8x22 inches, do you make anything close
I have port opening 8x22 inches, do you make anything close. Submitted by: gary
Your best bet is a Bomar Hatch they make ones that are pretty close. Take a look and see what will work the best.
Beckman Rain Shields
I have a 1981 Watkins 36 Center Cockpit Sloop. I am looking for rain shields for its portlights – similar to the Beckson RS - 18. My portlights are roughly:
(2) 15.5" X 7.5"
(2) 17" x 8 5/8"
(2) 18.5" x 8.5"
(2) 12.5" x 5.5"
(2) 12.5" x 5.5" (2) 14.5" x 4 3/4" I am wondering if the Beckman RS -18 would work on my 17" wide port light for example? Do you have any other sizes? or recommendations? Submitted by: Mike McDonald
The Beckson Rainshields are you best bet. The Gray Enterprises portlights that your vessel has have not been made in more than a couple decades.
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
