|
|
|
Mfr.
Attwood Marine
| Mfr No. 11206-5
- Durable protective molded rubber bow rollers
- 3" O.D. x 3" length
- 6" stop width and 1/2"-diameter hole
|
$4.82
|
|
Mfr.
Attwood Marine
| Mfr No. 11310-1
Trailer Bow Roller, Polymer, Yellow, 1/2" hole diameter...
|
$11.30
|
|
Mfr.
Sea-Dog
| Mfr No. 328053
Sea Dog, Bow Roller, Long, Stamped 304 Stainless Steel. 11"...
|
$85.71
|
|
Mfr.
Sea-Dog
| Mfr No. 328052
Sea Dog, Bow Roller, Short, 6-1/4" Stamped 304 Stainless Steel...
|
$42.35
|
|
Mfr.
Sea-Dog
Sea-Dog, Bow Roller Replacement Wheel, Natural Black Rubber. Hole inside diameter is 5/8"...
|
$9.40
-
$14.41
|
|
Mfr.
Sea-Dog
| Mfr No. 328050L
Sea-Dog, Bow Roller, Cast Stainless Steel 316, 12.5". Built of investment cast 316 stainless for years of service in the marine environment...
|
$122.72
|
|
Mfr.
Sea-Dog
Sea-Dog, Bow Roller, Cast Stainless Steel 316, 8". Built of investment cast 316 stainless for years of service in the marine environment...
|
$94.89
-
$1,718.75
|
|
Mfr.
Windline
| Mfr No. BRM-4
- For Bruce anchor size 22 lbs. and Delta® anchors 14 lbs. to 22 lbs
- Captive pin locks the anchor in place - eliminates movement underway
- Allows anch
...
|
$249.28
|
|
Mfr.
Windline
| Mfr No. URM-3
For Danforth®, Fortress® and Delta® type anchors. For boats 25' to 54'. Handles line up to 1-1/2" dia. and chain up to 1/2" w...
|
$219.72
|
|
Mfr.
Windline
| Mfr No. URM-4
For Danforth®, Fortress® and Delta® type anchors. For boats up to 35'. Ideal for mounting anchors where there is limited deck...
|
$176.65
|
|
Mfr.
Windline
| Mfr No. AR-2
Windline, Small Fairlead Anchor Roller, AR-2. For boats 20' to 30' with anchors up to 35 lbs...
|
$43.54
|
|
Mfr.
Windline
| Mfr No. AR-4
Windline, Small Platform Anchor Roller, AR-4. For boats 18' to 30' with anchor platform or bow planks and pivoting fluke anchors...
|
$68.21
|
|
Mfr.
Windline
Handcast from an elastomer unmatched in ability to resist wear and distortion at high loads. Manufacturer's lifetime warranty. Won't wear line or chain...
|
$17.16
-
$75.53
|
|
Mfr.
Attwood Marine
| Mfr No. 10257
Provides 32" of retractable, 1/4" nylon anchor line. Spooled on a spring loaded reel. Reel mechanism concealed in protec
|
$86.54
|
|
Mfr.
Lewmar
Universal Anchor Rode Fairleads. These are rollers for anchor rode retrieval only. They are not designed to mount and stow an anchor.. Polished 3
|
$36.40
-
$85.94
|
|
Mfr.
Lewmar
| Mfr No. 66840017
For Claw Style and Bruce Anchors to 44 Lbs.. Anchor bow rollers provide a low friction mechanism which makes it easier to drop and w
|
$403.04
|
|
Mfr.
Lewmar
Designed for Delta? anchors. Unique designs permits the anchor to self launch. It has an anti-chafing design and bail f
|
$154.50
-
$173.81
|
|
Mfr.
Lewmar
For Danforth (Lightweight) Style Anchors. These anchor rollers are suited for Danforth style, fluke-type lightweight anchors, as well a
|
$85.94
-
$197.63
|
|
Mfr.
Lewmar
Made for boats with anchor platforms. Hangs down within a slot in the platform. Fits most styles of anchors.. Small platform roller is made for boats
|
$53.04
-
$85.94
|
|
Mfr.
Lewmar
Replacement rollers for bow rollers.
|
$42.47
-
$47.74
|
|
Mfr.
Lewmar
| Mfr No. 66840007
Provides a friction free surface that makes it easier to drop and weigh anchor without damaging the deck or topsides. A
|
$154.50
|
|
Mfr.
Sea-Dog
| Mfr No. 328090
Stamped 304 Stainless. Stern mounted roller for line that may lead to one side or the other or swing from side to side. Also used for bow anchoring.
|
$58.51
|
|
Mfr.
Sea-Dog
| Mfr No. 328057
Sold in bulk. 3/8" bolt fastener.
|
$64.89
|
|
Mfr.
Sea-Dog
| Mfr No. 328054
Sold in bulk. 3/8" bolt fastener.
|
$78.04
|
|
Mfr.
Sea-Dog
| Mfr No. 328064
Sold in bulk. 3/8" bolt fastener.
|
$161.75
|
|
Mfr.
Sea-Dog
| Mfr No. 328074
Sold in bulk. 3/8" bolt fastener.
|
$213.05
|
|
Mfr.
Sea-Dog
| Mfr No. 328068
Stamped 304 stainless. Designed to facilitate self-launching of the anchor system. Sold in bulk.
|
$232.18
|
|
Mfr.
Whitecap
304 Stainless Steel Anchor Roller, for boats sizes 18' - 60' in length.
|
$31.25
-
$52.90
|
|
Mfr.
Whitecap
| Mfr No. AR-6490
304 Stainless Steel Anchor Tensioner. Anchor Size - Up to 90lb.
|
$24.27
|
|
Mfr.
Whitecap
Whitecap Anchor Rollers for Bruce Anchors. Ideal for 9'-48' Boats
|
$139.14
-
$290.17
|
|
Mfr.
Whitecap
Whitecap Anchor Rollers for Danforth/Fortress. Ideal for 16' to 54' Boats. Made of 304 Stainless Steel
|
$81.00
-
$187.21
|
|
Mfr.
Whitecap
304 Stainless Steel Platform Anchor Rollers, for boats sizes 18' - 48' in length...
|
$37.63
-
$72.90
|
|
Mfr.
Windline
| Mfr No. BRM3
For bruce anchor sizes 22 lbs. to 66 lbs. and Delta anchors 14 lbs. to 35 lbs. Self-adjusting system permits various si
|
$293.79
|
|
Mfr.
Windline
| Mfr No. CAR4
Marine grade stainless steel with a Marithane wheel. Designed with a cantilevered system that makes it easier to put up
|
$226.51
|
|
Mfr.
Windline
| Mfr No. BRM2
Model BRM-2. For boats 9 ft. - 30 ft. with Bruce anchor sizes 2.2 lbs. -16.5 lbs., or Delta® anchors 14 lbs. - 22 lbs.. Patented self-adjus
|
$154.21
|
|
Mfr.
Windline
| Mfr No. AR6
For boats with anchor platform or bow planks and pivoting fluke anchors. Mounts in or under slot to hold anchor under b
|
$130.89
|
|
Mfr.
Windline
| Mfr No. AR3
Stainless Steel. Chafe-free design. Protects the hull and make anchoring much easier and safer. AR2: A lightwe
|
$87.10
|
|
Mfr.
Windline
| Mfr No. AR5
For boats with anchor platform or bow planks and pivoting fluke anchors. Mounts in or under slot to hold anchor under b
|
$81.39
|
|
Mfr.
Windline
| Mfr No. CRM1
Heavy-duty stainless steel. Securely stows plow-type anchors for sailboats or powerboats. Stainless bail holds chain up
|
$207.30
|
|
Mfr.
Windline
| Mfr No. URM2
Stainless Steel. . URM2: Heavy-gauge model, built for holding Danforth and Fortress (through FX 23) on sail or
|
$102.81
|
|
Mfr.
Windline
| Mfr No. URM1
Heavy-duty stainless steel. Handles and securely stows plow, Danforth, Fortress and Delta type anchors, plow-type ancho
|
$332.58
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 41 of 41
|
Page:
1
|
Post a question or comment about Bow Anchor Rollers to our online boating community.
windline w40 and w50 - boring the center out of the wheels
Can anyone say if these rollers are a consistent material throughout? As like someone else, I need a larger shaft, and am wondering whether I might be sucessfull at drilling one to a larger size. Some pictures seem to clearly show a different material in the center, and other pictures appear to show a consistent material, or at least color. Maybe the way they are manufactured has changed over time? And if I used one with half inch chain and maybe a 250 lb anchor, I wonder if that would squash the material and create a lot of friction at the shaft? Thanks……r Submitted by: Roger
There is an ’axle tube’ in the center of the larger wheels. The wheels themselves are otherwise a solid throughout and they are made of an extremely durable material and shouldn’t be affected by the half inch chain or 250 pound anchor.
Windline has said that you can put the wheels in a lathe or bore out the center, but they recommend you put it in a freezer for about "10 hours."
Bow Roller assembly
Is there a complete assembly for a through pulpit type bow roller with stainless steel encasing the through hole?
This is going on a 34’ sliverton. Submitted by: Bob
Bow Anchor Roller Hardware
I am interested in purchasing a short bow anchor roller such as the Whitecap AR-6482, Sea Dog 328052, or the Dive-N-Dog AR-SP-1.75-6.25. All of these are listed on your web site. I need to know which of these, if any, include the stainless mounting hardware to actually install the unit. Thanks! Submitted by: Kev
No manufacturer supplies these with mounting hardware. You can see the issue here; are you mounting it through a deck (wood, fiberglass, 1/2", 4")? To a fiberglass bowsprit on a powerboat? To a wood boomkin at the stern of a ketch? Bolting it through or onto? The thickness of you material and location of the mount changes the mounting hardware.
Do you have a long narrow anchor roller?
I would like to purchase an anchor roller 2.25’’ wide with a quick pin and a long body, 15.75" - 16". Submitted by: kb
We have an anchor roller close to the dimensions you specifed which is 14.875" long. If you could use a slightly wider anchor roller, then there are many more available.
Do you have 2-3/8" wide, 3" diameter anchor chain roller?
I need a replacement roller only for my anchor roller. I have chain only on my anchor, 200 feet long. The existing roller is hard plastic with a 3/8" shaft and is 2 3/8" wide. The diameter of the outside edge of the roller is approximately 3" and has a groove in the centre of the roller to accommodate chain. Do you have such a piece. I do not mind having to turn the unit on a lathe to shave some width dimension to fit, but does need a 5/16" shaft opening or slightly larger. Submitted by: Al Tsuji
The closest anchor roller we have to the dimensions you specified is the W30 Marithane Wheel. It is 3.4" wide and has a 1/2" bore for the roller shaft. You would need to make it narrower and use a bushing for the shaft.
Show older >>
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
