|
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5513
SeaStar Bulkhead Fitting Kit accomidates bulkheads up to 3" thick, allowing 1/2" copper tubing or 3/8" nylon to connect up to the HF5513 fitting on both sides of the bulkhead...
|
$76.31
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5526
Tube Nuts For SeaStar Hydraulic Steering System. These 3/8" compression fittings utilize a 9/16"-24 extra fine thread for use with 3/8" copper tubing. 6 per package...
|
$20.16
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5534
Fits Seastar hydraulic steering systems, 90 degree with 3/8" NPT and 3/8" Hose. 3 per package...
|
$22.07
|
|
Mfr.
Teleflex Morse
Union Couplings for the SeaStar Hydraulic 3/8" tubing. HF5527 for copper tube and HF5528 for nylon tubing. 3 per package...
|
$16.55
-
$20.16
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5520
All SeaStar Manual Hydraulic steering cylinders utilize the same style of fittings for all applications. This Horizontal Bleeding Tee utilizes 3/8" fittings...
|
$58.71
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5471-2
Hydraulic Liquid Tie Bar Valve, HA5471-2The SeaStar cylinder allows for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar...
|
$281.13
|
|
Mfr.
Teleflex Morse
Used for Hynautic steering systems requiring 5/16" nylon tubing; tube nut, o-ring, lock ring, insert, 1/4" coupling and adapter each sold separately...
|
$5.08
-
$7.44
|
|
Mfr.
Teleflex Morse
| Mfr No. HA5450
Remote fill and vent Kit for the Teleflex Capalano Inboard Hydraulic Steering Helm, models HH5250 and HH5275...
|
$57.78
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5538
Fits Seastar hydraulic steering systems, 90 degree. 3 per package...
|
$23.07
|
|
Mfr.
Teleflex Morse
Teleflex, Fitting Kit, Seastar Capilano. Tubing fitting kit to install the SeaStar Capilano Inboard Steering System on your vessel...
|
$52.55
-
$52.60
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5521
All SeaStar Manual Hydraulic steering cylinders utilize the same style of fittings for all applications. This Vertical Bleeding Tee utilizes 3/8" fittings...
|
$57.31
|
|
Mfr.
Vetus
| Mfr No. BYPASS18
Hydraulic Steering By-pass valve (G1/2) for 18 mm i.d. tube...
|
$134.51
|
|
Mfr.
Vetus
| Mfr No. BYPASS8
Hydraulic Steering By-pass valve (G1/2) for tube 8 mm i.d. (incl. tube connectors 8 mm.) For use with Nylon Hose HS04N in the Vetus MTC30...
|
$64.48
|
|
Mfr.
Teleflex Morse
To add a second station to the Teleflex SeaStar Inboard, Outboard or Sterndrive Hydraulic Steering System. For 3/8" copper tubing or 3/8" nylon hose...
|
$59.25
-
$115.39
|
|
Mfr.
Teleflex Morse
| Mfr No. HF5512
SeaStar 3/4" Bulkhead Fitting Kit for single cylinder installations. Two assemblies per kit...
|
$71.45
|
|
|
Mfr.
Teleflex Morse
| Mfr No. HP5611
Trunion Mount Assembly, SeaStar Inboard Cylinders - HP5611. The mounting foot for all SeaStar Inboard Steering Cylinders...
|
$42.77
|
|
Mfr.
Trident Marine
| Mfr No. 2TFMS-6-5B
Teleflex Morse - Hydraulic Steering Hose Reusable Fitting, 5/16", 2TFMS-6-5B...
|
$37.36
|
|
Mfr.
Uflex
| Mfr No. T Fitting
Hydraulic "T" Fitting for installing multiple steering stations...
|
$9.64
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 18 of 18
|
Page:
1
|
Post a question or comment about Hydraulic Steering Fittings to our online boating community.
Morse hydraulic steering parts
I need the quad ring seal for a Morse hydraulic steering helm. 1988, helm # D306900, it fits the shaft under the steering wheel. Submitted by: Frank
Parts for Morse Hydraulic Helms are no longer available.
hydraulic steering
I have just replaced an optimax 150hp for a 150hp Suzuki four stroke but cannot fit the previous hydraulic steering due to the screws not lining up. does anyone have any solutions. Any help greatly appreciated. tom Answer: If the old cylinder is from Teleflex they night have a bracket they can supply you. Submitted by: tom
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
