|
|
 | Get your sailing gear at Go2marine whether racing, cruising or making a spinnaker swing. Shop quality sailing gear from recognized manufacturers such as Harkin, Forespar, Wichard, Lewmar, Ronstan, Schaefer Marine and more. |
|
Mfr.
Whitecap
| Mfr No. S-7016
- Eliminates need for key to open/close fills
- Large easy to open push-up tab
- Non-skid knurled surface on tab for positive grip
- Positive sea
...
|
$16.94
|
|
Mfr.
Whitecap
E-Z Push-Up Deck Cleats pop up for use but push down out of your way. The stainless steel E-Z Deck Cleat's mechanism is quick & easy to release and lock in place. The streamline flush-deck design...
|
$53.31
-
$116.78
|
|
Mfr.
Whitecap
| Mfr No. 6127
316 Stainless steel construction. Elegant finish protects and enhances the look of any deck port...
|
$43.68
|
|
Mfr.
Whitecap
- 316 Stainless steel deck cleats
|
$50.35
-
$104.26
|
|
Mfr.
Whitecap
| Mfr No. 6008H
Stainless steel construction. Slide top to right to lock into place. Inside diameter 3-7/8" x 2-1/2". Flange 4-1/8" x 2-7/8"...
|
$70.00
|
|
Mfr.
Whitecap
- 316 Stainless steel deck cleats
|
$13.11
-
$51.92
|
|
Mfr.
Whitecap
| Mfr No. S-1320
Height: 5", Diameter: 2-3/8", Cross Piece: 7", Base: 3-3/4" x 4-1/2". Requires 3, 5/16" Fasteners...
|
$68.57
|
|
Mfr.
Whitecap
Stainless Steel Push-Up Deck Fills for Gas, Diesel, Water & Waste. Built of 316 Stainless Steel and available in straight or angled configurations. Chained cap to prevent loss...
|
$32.08
-
$58.23
|
|
Mfr.
Whitecap
- Stainless Steel replacement pins
|
$5.36
-
$9.79
|
|
Mfr.
Whitecap
- Stainless Steel base mounts for handrail and life line systems
- Bases use #10 fasteners (6108 uses 1/4")
|
$9.04
-
$16.06
|
|
Mfr.
Whitecap
Handrail Connection Joints - Stainless Steel. Base mounts for handrail and life line systems...
|
$14.25
-
$39.25
|
|
Mfr.
Whitecap
- Stainless Steel base mounts for handrail and life line systems
- Bases use #10 fasteners used with 7/8" tube
...
|
$16.94
-
$23.47
|
|
Mfr.
Whitecap
- Stainless Steel 316 stanchions
- Various components located below adjacent to appropriate information and pictures
- Mix-and-match individual par
...
|
$13.58
-
$17.45
|
|
Mfr.
Whitecap
Stainless Steel 304 Studded Hand Rails includes 1/4-20 studs.
|
$31.17
-
$40.29
|
|
Mfr.
Whitecap
| Mfr No. 6103
316 Stainless Steel Top Cap Tube Size - 1" Pin Size - 1/4". Top Cap comes with 1/4-28 set screws. (Whitecap Part Number: 6249)
|
$9.83
|
|
Mfr.
Whitecap
| Mfr No. 6102
316 Stainless Steel Top Slide with Bolt Tube Size - 1" Bolt size - 1/4" - 20. Top Slide comes with 1/4-28 set screws.(Whitecap Part Number: 6249)
|
$10.85
|
|
Mfr.
Whitecap
| Mfr No. 6123
For Gas Fuel, 316 Stainless Steel. Use 3, #10 Fasteners. Chain - Yes, Angle - 90°...
|
$29.98
|
|
Mfr.
Whitecap
| Mfr No. 6124
For Diesel Fuel, 316 Stainless Steel. Use 3, #10 Fasteners. Chain - Yes, Angle - 90°...
|
$32.71
|
|
Mfr.
Whitecap
| Mfr No. 6126
For waste, 316 Stainless Steel. Use 3, #10 Fasteners. Chain - Yes, Angle - 90°...
|
$32.71
|
|
Mfr.
Whitecap
| Mfr No. 6126S
316 Stainless Steel Deck Fill Plate, larger opening for above deck fill allows better seal with nozzle.
|
$49.06
|
|
Mfr.
Whitecap
| Mfr No. 6125
For water, 316 Stainless Steel. Use 3, #10 Fasteners. Chain - Yes, Angle - 90°...
|
$29.98
|
|
Mfr.
Whitecap
| Mfr No. S-5010
Rail Mount Flagstaff. 304 Stainless Steel staff and Black Nylon Bracket Diameter - 1/2" Length - 17" Bracket - 7/8" and 1" tube
|
$25.38
|
|
Mfr.
Whitecap
| Mfr No. 6895
316 Stainless Steel, 2" Push-Up Hose Deck Fill (DIESEL)...
|
$53.94
|
|
Mfr.
Whitecap
| Mfr No. 6101
316 Stainless Steel Top Cap. Tube Size: 7/8", Pin Size - 1/4" with 1/4-28 set screws (Whitecap Part Number: 6249)
|
$9.13
|
|
Mfr.
Whitecap
| Mfr No. 6100
316 Stainless Steel Top Slide with Bolt Tube Size - 7/8" Bolt Size - 1/4" - 20
|
$9.83
|
|
Mfr.
Whitecap
| Mfr No. 6104
316 Stainless Steel 90° Deck Hinge Bolt Size - 1/4" - 20 Base Size - 7/8" x 2" Fastener - #10 (2)
|
$11.66
|
|
Mfr.
Whitecap
| Mfr No. S-6242
Whitecap, Boarding Handle Stainless Steel 45-1/2" Height. Tube diameter - 1-1/2", includes push button features to separate pole for storage purposes...
|
$154.45
|
|
Mfr.
Whitecap
| Mfr No. 6200
Bolt Size - 1/4" -20 - Removable stainless spring-loaded pin for easier top removal. Can be mounted on any curved surface of rail.
|
$13.38
|
|
Mfr.
Whitecap
| Mfr No. 6061
Replacement Cap & Chain for Whitecap part numbers: 6123, 6124, 6125 and 6126.
|
$16.11
|
|
Mfr.
Whitecap
Deck Fill and Deck Fill Replacement Cap & Chain for Whitecap part numbers: 6031, 6032, 6033, 6034, 6394, 6395, 6126S, 6124B.
|
$22.40
-
$64.07
|
|
Mfr.
Whitecap
| Mfr No. 6105
316 Stainless Steel Eye Strap Inside Diameter - 3/8" Length - 1-5/8" Fastener - 3/16"
|
$4.11
|
|
Mfr.
Whitecap
| Mfr No. 6060
Fits Whitecap 316 Stainless Steel Deck Fills
|
$6.96
|
|
Mfr.
Whitecap
| Mfr No. 6129
For oil, 316 Stainless Steel. Use 3, #10 Fasteners. Chain - Yes, Angle - 90°...
|
$35.82
|
|
Mfr.
Whitecap
| Mfr No. 6910C
Spring-Loaded Pop-Up, Low Profile Design. The sleek, recessed design of these cleats lessens the clutter on deck. The rounded, flush des
|
$104.94
|
|
Mfr.
Whitecap
316 Stainless Steel Hinged Jaw Slide, Tube size - 7/8" or 1" Pin size - 1/4" Bolt size - 1/4"-20
|
$19.57
-
$25.87
|
|
Mfr.
Whitecap
| Mfr No. 6124B
316 Stainless Steel Deck Fill Plate, larger opening for above deck fill allows better seal with nozzle.
|
$51.43
|
|
Mfr.
Whitecap
| Mfr No. S-541C
Whitecap Junior Cleat, Chrome Plated Brass, S-541...
|
$5.81
|
|
Mfr.
Whitecap
Whitecap, Rubber Spreader Boot White...
|
$14.64
-
$22.44
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 38 of 38
|
Page:
1
|
Post a question or comment about Sailing Hardware & Gear to our online boating community.
Building or buying a stern pulpit
I am looking for a stern pulip for my 1981 Hunter 22. any clue as to were I could get one. I prefer new but would take a used one if need be. Answer You can fabricate yours with Rail Fittings, Stainless Steel Tube or Stantions. For a smaller boat, it can be cost prohibitive to buy a new stern pulpit - but building it is affordable. For used, that will be a challange. Most people want to hang onto their stern pulpit. Check your local boat yards. Submitted by: jpfister
Rigging the Jib Sheet for a 1970's Johnson Sailboat
I just purchased my first sail boat. A Johnson x class sailboat from the 1970s. I’m not sure how the rigging for the jib sheet is supposed to go, but I was thinking of using some kind of pulley and cleat on a track. Something similar to what is shown in a book (this is sailing). They use a sunfish for an example boat in the book. Is this a good idea to use. Or can I get help (pictures) how the rigging originally was on the Johnson boat. Submitted by: Mike
OK - I will try to address all that could possibly be what you are reffering to, working from forward, aft; The Jib Sheet attaches to the clew of the sail. The sheets typically run down both sides of the cabin, aft, to a pulley (block) on a track. The jib sheet then wraps on the winch (bigger boat) or just a cleat (small boat). If you do not have a track, a track and car / block system can be purchased.
Do you have RWO halyard jammers?
I am looking for RWO p# R8160 halyard jammers. I am in need of 4. Anyone know where I may purchase them? Answer I don’t know for sure, but I believe these halyard jammers have been discontinued. You might try calling some of the older chandleries and checking their stock. Submitted by: richard
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
