|
|
 | Get your sailing gear at Go2marine whether racing, cruising or making a spinnaker swing. Shop quality sailing gear from recognized manufacturers such as Harkin, Forespar, Wichard, Lewmar, Ronstan, Schaefer Marine and more. |
|
Mfr.
Garelick
| Mfr No. 71053
Auxiliary Motor Adapter Plate, Aluminum...
|
$56.91
|
|
Mfr.
Garelick
Garelick - Auxiliary Motor Brackets for Four Stroke Motors. Raise and lower trolling and auxiliary motors on power and sailboats with ease...
|
$266.11
-
$379.88
|
|
Mfr.
Garelick
| Mfr No. 71040
Auxiliary Motor Bracket, Aluminum, Max 8 Hp, 2 stroke, 71040. Retractable Bracket for handling Trolling Auxiliary Motors on power and sailboats with ease...
|
$162.31
|
|
Mfr.
Garelick
Garelick, Stainless Steel Auxiliary Outboard Motor Brackets, 2 Stroke Motors. Easier to lift and lower – stainless springs help counterbalance motor weight...
|
$182.97
-
$252.97
|
|
Mfr.
Garelick
| Mfr No. 71095
Hydra Powered Assisted Outboard Motor Bracket, 71095...
|
$1,846.92
|
|
Mfr.
Garelick
| Mfr No. 25122
Designed to step down from or up to the cockpit. Uprights are durable 1" aluminum. Attaches easily with Shurloc 76000 catc
|
$218.31
|
|
Mfr.
Garelick
Cockpit Step. Designed for stepping up or down from the cockpit. Attaches easily with Shurloc 76000 catches, included...
|
$136.62
-
$159.66
|
|
Mfr.
Garelick
| Mfr No. 71042
Garelick Outboard Motor Bracket, Aluminum, for 7-1/2 to 12 Horsepower. Retractable. Bolts to transom holding motor safely out of water...
|
$176.57
|
|
Mfr.
Garelick
| Mfr No. 71057
Garelick Outboard Motor Bracket, Aluminum, for 7-1/2 to 20 Horsepower. Retractable. Bolts to transom holding motor safely out of water...
|
$157.44
|
|
Mfr.
Garelick
| Mfr No. 71036
Garelick, Outboard, Boat Motor Tilter. Leverage tool for use with manual lift motors...
|
$74.41
|
|
Mfr.
Garelick
| Mfr No. 99057
Black Poly. Fits all Garelick models except 71044.
|
$57.57
|
|
Mfr.
Garelick
| Mfr No. 71078
Fixed height mount for an auxiliary or trolling motor. 2-stroke. 304 Stainless brackets and hardware. 1-1/2" (4cm) blac
|
$100.21
|
|
Mfr.
Garelick
| Mfr No. 71069
For Rail⁄Lifeline Mounts - Fixed. Holds gear in place - line coils, life vest, fish rods and deck chairs. Turn snap opens and closes strap
|
$23.35
|
|
Mfr.
Garelick
It is adjustable. Permanent fixed height mount with built-in transom angle and trim adjustment for auxiliary or trolling. For motors up to 15 hp.
|
$86.09
-
$100.98
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 14 of 14
|
Page:
1
|
Post a question or comment about Sailing Hardware & Gear to our online boating community.
Building or buying a stern pulpit
I am looking for a stern pulip for my 1981 Hunter 22. any clue as to were I could get one. I prefer new but would take a used one if need be. Answer You can fabricate yours with Rail Fittings, Stainless Steel Tube or Stantions. For a smaller boat, it can be cost prohibitive to buy a new stern pulpit - but building it is affordable. For used, that will be a challange. Most people want to hang onto their stern pulpit. Check your local boat yards. Submitted by: jpfister
Rigging the Jib Sheet for a 1970's Johnson Sailboat
I just purchased my first sail boat. A Johnson x class sailboat from the 1970s. I’m not sure how the rigging for the jib sheet is supposed to go, but I was thinking of using some kind of pulley and cleat on a track. Something similar to what is shown in a book (this is sailing). They use a sunfish for an example boat in the book. Is this a good idea to use. Or can I get help (pictures) how the rigging originally was on the Johnson boat. Submitted by: Mike
OK - I will try to address all that could possibly be what you are reffering to, working from forward, aft; The Jib Sheet attaches to the clew of the sail. The sheets typically run down both sides of the cabin, aft, to a pulley (block) on a track. The jib sheet then wraps on the winch (bigger boat) or just a cleat (small boat). If you do not have a track, a track and car / block system can be purchased.
Do you have RWO halyard jammers?
I am looking for RWO p# R8160 halyard jammers. I am in need of 4. Anyone know where I may purchase them? Answer I don’t know for sure, but I believe these halyard jammers have been discontinued. You might try calling some of the older chandleries and checking their stock. Submitted by: richard
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
