|
|
 | Get your sailing gear at Go2marine whether racing, cruising or making a spinnaker swing. Shop quality sailing gear from recognized manufacturers such as Harkin, Forespar, Wichard, Lewmar, Ronstan, Schaefer Marine and more. |
|
Mfr.
Lewmar
Use Lewmar deck organizers to sort sail handling lines neatly
|
$57.91
-
$88.33
|
|
Mfr.
Lewmar
- Fits standard Lewmar 32 mm (1-1/4") wide T-track
- Designed for boats from 9m/30 ft to 16.5m/55 ft
- T-Track cars cover 3 different loading levels
|
$175.06
-
$212.59
|
|
Mfr.
Lewmar
| Mfr No. 2990-1631
- Delrin side thrust ball bearings
- Three position shackle post
- Flush fastenings and radiused edges
- Monocoque construction
- Line size: 3/8"
- Length: 6-5
...
|
$69.06
|
|
Mfr.
Lewmar
| Mfr No. 2990-1665
- Delrin side thrust ball bearings
- Three position shackle post
- Flush fastenings and radiused edges
- Monocoque construction
- Line size: 3/8"
- Length: 5-1
...
|
$72.39
|
|
Mfr.
Lewmar
| Mfr No. 2990-1613
- Delrin side thrust ball bearings
- Three position shackle post
- Flush fastenings and radiused edges
- Monocoque construction
- Line size: 7/16"
- Length: 5"
...
|
$262.09
|
|
Mfr.
Lewmar
| Mfr No. 2990-1821
- Delrin side thrust ball bearings
- Three position shackle post
- Flush fastenings and radiused edges
- Monocoque construction
- Line size: 1/2"
- Length: 6"
...
|
$152.08
|
|
Mfr.
Lewmar
| Mfr No. 2990-1829
- Delrin side thrust ball bearings
- Three position shackle post
- Flush fastenings and radiused edges
- Monocoque construction
- Line size: 1/2"
- Length: 7"
...
|
$249.83
|
|
Mfr.
Lewmar
| Mfr No. 19701000
- Top quality, complex calcium sulphonate based grease
- Waterproof, with solid activation to
aid load carrying characteristics of a winch
|
$17.00
|
|
Mfr.
Lewmar
| Mfr No. 2990-5200
|
$37.69
|
|
Mfr.
Lewmar
- Size 1 for boats to 35'
- Size 2 for boats to 44'
- Size 3 for boats to 50'
|
$65.73
-
$90.11
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- Minimum friction feeder arm
- All bronze one-piece center stem
- Rigid case stainless steel roller bearin
...
|
$590.74
-
$654.30
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- Minimum friction feeder arm
- All bronze one-piece center stem
- Rigid case stainless steel roller bearin
...
|
$917.48
-
$996.99
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- Minimum friction feeder arm
- All bronze one-piece center stem
- Rigid case stainless steel roller bearin
...
|
$2,458.10
-
$2,823.61
|
|
Mfr.
Lewmar
- 5/16" Torlon balls run in fully machined ball races
- 2-3/8" diameter control line sheaves for 7/16" line
- Alloy sheaves run on Torlon rollers with dual Delrin
...
|
$786.29
-
$786.29
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- All bronze one-piece center stem
- Rigid case stainless steel roller bearings
- Robust machine cut gears
...
|
$135.45
-
$183.72
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- All bronze one-piece center stem
- Rigid case stainless steel roller bearings
- Robust machine cut gears
...
|
$207.57
-
$226.78
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- All bronze one-piece center stem
- Rigid case stainless steel roller bearings
- Robust machine cut gears
...
|
$236.80
-
$276.20
|
|
Mfr.
Lewmar
- Screw on top cap
- Needle peen drum for better grip
- All bronze one-piece center stem
- Rigid case stainless steel roller bearings
- Robust machine cut gears
...
|
$476.22
-
$515.16
|
|
Mfr.
Lewmar
| Mfr No. 2990-1611
- Delrin side thrust ball bearings
- Three position shackle post
- Flush fastenings and radiused edges
- Monocoque construction
- Line size: 7/16"
- Length: 4-
...
|
$119.56
|
|
Mfr.
Lewmar
Easy Sail Control Systems Combined with Strength and Reliability. Size 0 Ocean Traveler Kit - 2:1 purchase system for mid-boom sheeting to
|
$250.22
-
$481.89
|
|
Mfr.
Lewmar
| Mfr No. 2992-1051
5/8" (15mm) Line. Through a combination of geometry, sheave ratios and a unique free-spin bearing, the Synchro range delivers nearly the perform
|
$402.34
|
|
Mfr.
Lewmar
Lewmar Self-Tailing Winches provide the ultimate self-tailing design - gentle on the line, yet providing a firm grip. The “Wavesp
|
$1,116.24
-
$1,224.36
|
|
Mfr.
Lewmar
| Mfr No. JWTUEPX
Two-Part Epoxy System. Used with Treadmaster non-skid material. Ideal for most deck materials. Provides a permanent bond. Full instructions on c
|
$68.31
|
|
Mfr.
Lewmar
5/16" (8mm) Line. Extremely lightweight, Lewmar's 30mm Synchro blocks maintain high performance with less effort. The sheave uses metal r
|
$18.82
-
$73.61
|
|
Mfr.
Lewmar
3/8" (10mm) Line. Extremely lightweight with high load bearing capability. The sheave uses metal replacement technology which, combined with th
|
$21.99
-
$105.17
|
|
Mfr.
Lewmar
3/8" (10mm) Line. Through a combination of geometry, sheave ratios and a unique free spin bearing, Lewmar's Synchro
|
$17.92
-
$51.69
|
|
Mfr.
Lewmar
3/8" (10mm) Line. Unique free-spin self lubricating bearing. Optimized sheave to rope ratio. Swivel lock self aligning head. Adjustable cams
|
$22.99
-
$110.01
|
|
Mfr.
Lewmar
| Mfr No. 2990-1634
3/8" (10mm) Line. Lewmar's racing fiddle blocks are desinged to acheive the best strength to weight ratio while remaining race legal. .
|
$72.00
|
|
Mfr.
Lewmar
| Mfr No. 2990-1651
7/16" (11mm) Line. Lewmar's growing Synchro control range is designed specifically for hand held loads. The 60 mm block, orginally called the
|
$39.10
|
|
Mfr.
Lewmar
7/16" (11mm) Line. Through a combination of geometry, sheave ratios and a unique free-spin bearing, the Synchro range del
|
$38.54
-
$145.61
|
|
Mfr.
Lewmar
| Mfr No. 29145001
Locking and Non-Locking. Initial fast cranking with one hand on the top of the Power-Grip handle is easy. When the load comes on, and it's time
|
Request Availability
|
|
Mfr.
Lewmar
9/16" (14mm) Line. Through a combination of geometry, sheave ratios and a unique free-spin bearing, the Synchro range delivers nearly the perf
|
$84.06
-
$192.36
|
|
Mfr.
Lewmar
| Mfr No. 2917-0022
Delrin®. Replacement ball bearings for Lewmar blocks. Lewmar Delrin® balls are dark colored to offer increased protection from UV degrad
|
$25.46
|
|
Mfr.
Lewmar
Stainless Steel. Toggles are used primarily with fork ended rigging screws to permit full articulation at the end of a stay, reducing the chance
|
$42.91
-
$215.80
|
|
Mfr.
Lewmar
| Mfr No. 2990-1612
7/16" (11mm) Line. Sheaves run on dual ball races with alloy cheeks, sheaves, and web blocks feature Torlon® rollers.. Sheave diameter:
|
$192.53
|
|
Mfr.
Lewmar
| Mfr No. 2914-0013
Repair Kits for Lock-In Winch Handles
|
$26.49
|
|
Mfr.
Lewmar
316 Stainless Steel. Navtec offers a full range of spare rigging parts.
|
$39.67
-
$100.97
|
|
Mfr.
Lewmar
1/4" (6mm) to 7/16 (11mm) Line. The D1 clutch is designed for high load applications on boats up to 32 feet, and low load and control line ap
|
$76.81
-
$186.38
|
|
Mfr.
Lewmar
5/16" (8mm) to 9/16" (14mm). The new D2 line clutches are designed for high load applications on boats up to 55' and low load and con
|
$99.67
-
$246.86
|
|
Mfr.
Lewmar
Lewmar, Snap Shackle. For Synchro control blocks...
|
$27.41
-
$60.74
|
|
Mfr.
Lewmar
1/2" (12mm) to 5/8" (15mm) Line. Lewmar's Ocean series snatch blocks are great to have for general spinnaker use for many sizes of boat
|
$183.72
-
$221.63
|
|
Mfr.
Lewmar
To maintain the integrity of your winch from fresh and salt water corrosion, it is necessary to lube and oil the interior of your winch every year.
|
$32.13
-
$117.57
|
|
Mfr.
Lewmar
Lewmar, Winch Spares Kits...
|
$40.43
-
$54.40
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 43 of 43
|
Page:
1
|
Post a question or comment about Sailing Hardware & Gear to our online boating community.
Building or buying a stern pulpit
I am looking for a stern pulip for my 1981 Hunter 22. any clue as to were I could get one. I prefer new but would take a used one if need be. Answer You can fabricate yours with Rail Fittings, Stainless Steel Tube or Stantions. For a smaller boat, it can be cost prohibitive to buy a new stern pulpit - but building it is affordable. For used, that will be a challange. Most people want to hang onto their stern pulpit. Check your local boat yards. Submitted by: jpfister
Rigging the Jib Sheet for a 1970's Johnson Sailboat
I just purchased my first sail boat. A Johnson x class sailboat from the 1970s. I’m not sure how the rigging for the jib sheet is supposed to go, but I was thinking of using some kind of pulley and cleat on a track. Something similar to what is shown in a book (this is sailing). They use a sunfish for an example boat in the book. Is this a good idea to use. Or can I get help (pictures) how the rigging originally was on the Johnson boat. Submitted by: Mike
OK - I will try to address all that could possibly be what you are reffering to, working from forward, aft; The Jib Sheet attaches to the clew of the sail. The sheets typically run down both sides of the cabin, aft, to a pulley (block) on a track. The jib sheet then wraps on the winch (bigger boat) or just a cleat (small boat). If you do not have a track, a track and car / block system can be purchased.
Do you have RWO halyard jammers?
I am looking for RWO p# R8160 halyard jammers. I am in need of 4. Anyone know where I may purchase them? Answer I don’t know for sure, but I believe these halyard jammers have been discontinued. You might try calling some of the older chandleries and checking their stock. Submitted by: richard
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
