|
|
 | Get your sailing gear at Go2marine whether racing, cruising or making a spinnaker swing. Shop quality sailing gear from recognized manufacturers such as Harkin, Forespar, Wichard, Lewmar, Ronstan, Schaefer Marine and more. |
|
Mfr.
Harken
| Mfr No. 406
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$24.68
|
|
Mfr.
Harken
| Mfr No. 407
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$26.97
|
|
Mfr.
Harken
| Mfr No. 368
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$45.36
|
|
Mfr.
Harken
| Mfr No. 432
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Patented bearing system uses stainless balls in a captive, grooved race
...
|
$14.76
|
|
Mfr.
Harken
| Mfr No. 404
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$11.88
|
|
Mfr.
Harken
| Mfr No. 405
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$13.50
|
|
Mfr.
Harken
| Mfr No. 417
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$21.34
|
|
Mfr.
Harken
| Mfr No. 421
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$33.00
|
|
Mfr.
Harken
| Mfr No. 409
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$36.70
|
|
Mfr.
Harken
| Mfr No. 408
- 16 mm AirBlocks offer very high working loads in an extremely small, lightweight block
- Features a patented bearing system using stainless balls in a captive, gr
...
|
$34.85
|
|
Mfr.
Harken
| Mfr No. 013
- Stainless steel load carrying strap
- Exceptionally free running
- UV stabilized Delrin sheaves and cheeks
- Black Magic carbon-filled balls
- Max line diamete
...
|
$38.98
|
|
Mfr.
Harken
| Mfr No. 003
- Stainless steel load carrying strap
- Three-way head system
- Exceptionally free running
- UV stabilized Delrin sheaves and cheeks
- Black Magic carbon-filled
...
|
$86.81
|
|
Mfr.
Harken
| Mfr No. 047
- Black Magic carbon-filled balls
- Max line diameter is 7/16"
- Sheave diameter is 2-1/4"
- Cutout is 1-1/16" x 3-1/4"
- Uses #8 RH fasteners
|
$49.81
|
|
Mfr.
Harken
| Mfr No. 206
- Black Magic carbon-filled balls
- Sheave diameter is 2-1/4"
- Max line diameter is 7/16"
- Breaking strength is 2500 lbs
- Use #10 RH fasteners
...
|
$53.85
|
|
Mfr.
Harken
- Easy to install and simple to use
- Polished stainless steel and chromed bronze
- Bronze worm gears and threaded drives
- Moving components are mounted on grease
...
|
$1,411.24
-
$2,084.18
|
|
Mfr.
Harken
- Easy entry system and raised base for simple line engagement
- Drain hole in base
- Lines can be adjusted with minimal slippage during engagement
- Balls allow p
...
|
$25.21
-
$76.78
|
|
Mfr.
Harken
| Mfr No. 562
- Fits all #560 Harken Big Boat Track
- End stops are polyurethane to absorb shock loads
- Set of 2
|
$52.15
|
|
Mfr.
Harken
| Mfr No. 1896
For use with mainsheet travelers, self-tacking jibs, outhauls and genoas. The Toggle Kit can be added to the 515 and 558 cars. Accepts Mid-Range blocks and...
|
$54.26
|
|
Mfr.
Harken
- For use with jibs, mainsheet systems, sheets and control lines on high-performance dinghies
- Ideal for highly-loaded control lines on small keelboats
- High-load b
...
|
$25.34
-
$100.06
|
|
Mfr.
Harken
For use on sheets, halyards, running backstays and control lines of offshore boats. Roller bearings for high loads. High efficiency center caged bearings.
|
Request Availability
|
|
Mfr.
Harken
- High load capacity
- AirBlock® design
- For use with main/jib sheet, spinnaker halyard and control lines on centerboard and keelboats such as Lightnings, Drago
...
|
$33.92
-
$117.04
|
|
Mfr.
Harken
- Stainless steel arms on the blocks adjust to more than 5 different positions
- Arms are secured to the block by composite plastic locking plates with a total of 36 p
...
|
$82.63
-
$111.67
|
|
Mfr.
Harken
- Specifically designed for line attachment
- Lightweight composite sideplates
- Blocks are 40% lighter, with a 60% higher working load than traditional equivalent
...
|
$25.85
-
$32.43
|
|
Mfr.
Harken
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Length: 2-7/8"
- Uses #10RH Fasteners
|
$15.88
-
$20.85
|
|
Mfr.
Harken
| Mfr No. 085
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Breaking strength is 2000 lbs
- Shackle pin diameter is 3/16"
|
$37.97
|
|
Mfr.
Harken
| Mfr No. 089
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Uses #10FH Fasteners
|
$30.10
|
|
Mfr.
Harken
| Mfr No. 113
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Uses #10 RH Fasteners
|
$21.23
|
|
Mfr.
Harken
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Wire Bullet blocks use higher load carrying roller bearings and feature Teflon
...
|
$15.53
-
$20.44
|
|
Mfr.
Harken
| Mfr No. 167
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Shackle pin diameter is 3/16"
|
$25.61
|
|
Mfr.
Harken
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Length: 3"
- Uses #10RH Fasteners
- Cut out is 13/16" x 1-3/4"
|
$18.96
-
$23.58
|
|
Mfr.
Harken
| Mfr No. 087
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Shackle pin diameter is 3/16"
|
$52.80
|
|
Mfr.
Harken
| Mfr No. 291
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Uses #10 RH Fasteners
|
$72.07
|
|
Mfr.
Harken
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Shackle pin diameter is 3/16"
- Wire Bullet blocks use higher load carrying
...
|
$35.42
-
$41.94
|
|
Mfr.
Harken
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Wire Bullet blocks use higher load carrying roller bearings, and feature Teflon
...
|
$12.98
-
$17.34
|
|
Mfr.
Harken
- Ball bearing sheaves
- 5/16" max line size
- Sheave diameter is 1-1/8"
- Length: 2-3/4"
- Shackle pin diameter is 3/16"
|
$23.01
-
$26.58
|
|
Mfr.
Harken
| Mfr No. 1565
- Use these blocks to build simple three and four part purchases for one-designs to large offshore boats
- Three-way head system
- Hardkote anodized aluminum ratchet
...
|
$255.49
|
|
Mfr.
Harken
| Mfr No. 1566
- Use these blocks to build simple three and four part purchases for one-designs to large offshore boats
- Three-way head system
- Hardkote anodized aluminum ratchet
...
|
$305.84
|
|
Mfr.
Harken
| Mfr No. 004
- Stainless steel load carrying strap
- Three-way head system
- Exceptionally free running
- UV stabilized Delrin sheaves and cheeks
- Black Magic carbon-filled
...
|
$97.90
|
|
Mfr.
Harken
| Mfr No. 001
- Stainless steel load carrying strap
- Three-way head system
- Exceptionally free running
- UV stabilized Delrin sheaves and cheeks
- Black Magic carbon-filled
...
|
$41.84
|
|
Mfr.
Harken
| Mfr No. 002
- Stainless steel load carrying strap
- Three-way head system
- Exceptionally free running
- UV stabilized Delrin sheaves and cheeks
- Black Magic carbon-filled
...
|
$52.67
|
|
Mfr.
Harken
| Mfr No. B6A
Used for sheets on very small boats and halyards on small and medium sized boats. Features all metal bases, bushings or bearings. Drum diameter is 2-3/8". Base...
|
$155.20
|
|
Mfr.
Harken
| Mfr No. B46.2STA
Used for sheets, halyards and control lines on racing and crusing boats. Features all metal base, bushings and bearings. Line diameter: Min is 5/16" ...
|
$2,523.47
|
|
Mfr.
Harken
| Mfr No. B16STC
Used for sheets, halyards and control lines on racing and cruising boats. Features all metal base, bushings and bearings. Line diameter: Min is 1/4" ...
|
Request Availability
|
|
Mfr.
Harken
| Mfr No. B32.2STC
Used for sheets, halyards and control lines on racing and cruising boats. Features all metal base, bushings and bearings. Line diameter: Min is 5/16" ...
|
$1,005.63
|
|
Mfr.
Harken
| Mfr No. B48.2STC
Used for sheets, halyards and control lines on racing and cruising boats. Features all metal base, bushings and bearings. Line diameter: Min is 5/16" ...
|
$2,087.43
|
|
Mfr.
Harken
| Mfr No. B74.2STC
Used for sheets and halyards on large sized boats. Features all metal bases, bushings and bearings. Line diameter: Min is 3/8" ...
|
$6,428.43
|
|
Mfr.
Harken
| Mfr No. B42.2A
Used for primaries on small and medium sized boats, and for halyards on medium sized boats. Features all metal bases, bushings and bearings. Drum diameter is 3-9...
|
Request Availability
|
|
Mfr.
Harken
| Mfr No. 1544
- Ideal for medium and large offshore boats
- Sheave diameter is 3"
- Max line diameter is 9/16"
- Shackle pin diameter is 5/16"
|
$173.58
|
|
Mfr.
Harken
| Mfr No. 1545
- Ideal for medium and large offshore boats
- Max line diameter is 9/16"
- Shackle pin diameter is 5/16"
- Sheave diameter is 3"
|
$187.40
|
|
Mfr.
Harken
| Mfr No. 1564
- Use these blocks to build simple three and four part purchases for one-designs to large offshore boats
- Three-way head system
- Hardkote anodized aluminum ratchet
...
|
$256.08
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about Sailing Hardware & Gear to our online boating community.
Building or buying a stern pulpit
I am looking for a stern pulip for my 1981 Hunter 22. any clue as to were I could get one. I prefer new but would take a used one if need be. Answer You can fabricate yours with Rail Fittings, Stainless Steel Tube or Stantions. For a smaller boat, it can be cost prohibitive to buy a new stern pulpit - but building it is affordable. For used, that will be a challange. Most people want to hang onto their stern pulpit. Check your local boat yards. Submitted by: jpfister
Rigging the Jib Sheet for a 1970's Johnson Sailboat
I just purchased my first sail boat. A Johnson x class sailboat from the 1970s. I’m not sure how the rigging for the jib sheet is supposed to go, but I was thinking of using some kind of pulley and cleat on a track. Something similar to what is shown in a book (this is sailing). They use a sunfish for an example boat in the book. Is this a good idea to use. Or can I get help (pictures) how the rigging originally was on the Johnson boat. Submitted by: Mike
OK - I will try to address all that could possibly be what you are reffering to, working from forward, aft; The Jib Sheet attaches to the clew of the sail. The sheets typically run down both sides of the cabin, aft, to a pulley (block) on a track. The jib sheet then wraps on the winch (bigger boat) or just a cleat (small boat). If you do not have a track, a track and car / block system can be purchased.
Do you have RWO halyard jammers?
I am looking for RWO p# R8160 halyard jammers. I am in need of 4. Anyone know where I may purchase them? Answer I don’t know for sure, but I believe these halyard jammers have been discontinued. You might try calling some of the older chandleries and checking their stock. Submitted by: richard
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
