Sailing Hardware & Gear

Home

Sailing Gear
(Navtec)

Insulator Swageless, Both Ends Mfr. Navtec

Part No.	Items	Mfr No.	Your Price
219941	INS ulator 5/16 in. Swageless Stainless Steel Both Ends	NI53-1010	$211.42
219940	Insulator 1/4 in. Swageless Stainless Steel Both Ends	NI53-0808	$188.29

Rig Rap Rigging & Chafe Tape 1 in.x 36 Ft Mfr. Navtec

Part No.	Items	Mfr No.	Your Price
224923	Rig Rap Rigging & Chafe Tape 1 in.x 36 Ft	V100-02	$18.92

Swageless Eye Terminal Mfr. Navtec

Part No.	Items	Mfr No.	Your Price
219929	Swageless Stainless Steel 1/4 in. Eye Terminal 1/2 in. Pin Diameter	N010-0816	$45.62
219932	Swageless Stainless Steel 3/8 in. Eye w/ 5/8 in. Pin Diameter	N010-1220	$86.12
220014	Swageless Stainless Steel 5/16 in. Eye w/ 1/2 in. Pin Diameter	N010-1016	$63.70
218743	Swageless Stainless Steel 5/16 in. Eye w/ 5/8 in. Pin Diameter	N010-1020	$66.35
219927	Swageless Stainless Steel 7/32 in. Eye Terminal 7/16 Pin Diameter	N010-0714	$43.77

Swageless Fork Terminal Mfr. Navtec

Part No.	Items	Mfr No.	Your Price
219930	Swageless Stainless Steel 1/4 in. Fork Terminal 7 / 16 in. Pin Diameter	N020-0814	$62.76
219933	Swageless Stainless Steel 3/8 in. Fork w/ 5/8 in. Pin Diameter	N020-1220	$104.16
219931	Swageless Stainless Steel 5/16 in. Fork w/ 1/2 in. Pin Diameter	N020-1016	$80.21
220015	Swageless Stainless Steel 5/16 in. Fork w/ 5/8 in. Pin Diameter	N020-1020	$78.15
219928	Swageless Stainless Steel 7/32 in. Fork Terminal 7/16 Pin Diameter	N020-0714	$62.76

Swageless Stud Terminal Mfr. Navtec

Part No.	Items	Mfr No.	Your Price
220271	Swageless Stainless Steel 1/4 in. Stud 1/2 in. UNF	N030-0816	$42.83
220579	Swageless Stainless Steel 1/4 in. Stud 3/8 in. UNF	N030-0812	$42.83
219889	Swageless Stainless Steel 3/16 in. Stud 5/16 in. UNF	N030-0610	$35.67
220194	Swageless Stainless Steel 3/8 in. Stud 5/8 in. UNF	N030-1220	$88.87
239811	Swageless Stainless Steel 3/8 in. Stud 5/8 in. UNF	N030L-1220	$99.44
221128	Swageless Stainless Steel 5/16 in. Stud 1/2 in. UNF	N030-M0816	$64.26
219965	Swageless Stainless Steel 5/16 in. Stud 5/8 in. UNF	N030-M0820	$64.26

T-Ring Terminal With Thimble Mfr. Navtec

Part No.	Items	Mfr No.	Your Price
232344	T-Ring Terminal With Thimble	N743-06	$26.78
232345	T-Ring Terminal With Thimble	N743-07	$36.94
232343	T-Ring Terminal With Thimble M04	N743-M04	$19.20

Products: 1 - 6 of 6

Page: 1

Post a question or comment about Sailing Hardware & Gear to our online boating community.

Question

Building or buying a stern pulpit

I am looking for a stern pulip for my 1981 Hunter 22. any clue as to were I could get one. I prefer new but would take a used one if need be.

Answer

You can fabricate yours with Rail Fittings, Stainless Steel Tube or Stantions. For a smaller boat, it can be cost prohibitive to buy a new stern pulpit - but building it is affordable.

For used, that will be a challange. Most people want to hang onto their stern pulpit. Check your local boat yards.

Submitted by: jpfister

Add comment

Question

Rigging the Jib Sheet for a 1970's Johnson Sailboat

I just purchased my first sail boat. A Johnson x class sailboat from the 1970s. I’m not sure how the rigging for the jib sheet is supposed to go, but I was thinking of using some kind of pulley and cleat on a track. Something similar to what is shown in a book (this is sailing). They use a sunfish for an example boat in the book. Is this a good idea to use. Or can I get help (pictures) how the rigging originally was on the Johnson boat.

Submitted by: Mike

Answer

OK - I will try to address all that could possibly be what you are reffering to, working from forward, aft;

The Jib Sheet attaches to the clew of the sail. The sheets typically run down both sides of the cabin, aft, to a pulley (block) on a track. The jib sheet then wraps on the winch (bigger boat) or just a cleat (small boat).

If you do not have a track, a track and car / block system can be purchased.

Add comment

Question

Do you have RWO halyard jammers?

I am looking for RWO p# R8160 halyard jammers. I am in need of 4. Anyone know where I may purchase them?

Answer

I don’t know for sure, but I believe these halyard jammers have been discontinued. You might try calling some of the older chandleries and checking their stock.

Submitted by: richard

Add comment

Name / Nickname:

Email:
(optional)

Type of Submission:

Subject:

Message:

Tips on Reviewing:

How you use the product
What you like about this product
How can this product be improved
When asking about Engine Parts, please include: Year, Make, Model and Serial Number of engine or part

Please do not include: personal information, profanity or copyrighted works. Conditions of Use

Sailing Hardware & Gear by Navtec

Insulator Swageless, Both Ends Mfr. Navtec

Rig Rap Rigging & Chafe Tape 1 in.x 36 Ft Mfr. Navtec

Swageless Eye Terminal Mfr. Navtec

Swageless Fork Terminal Mfr. Navtec

Swageless Stud Terminal Mfr. Navtec

T-Ring Terminal With Thimble Mfr. Navtec