Hydraulic Pumps

The pump is made to order at Eaton / Vickers. It will take up to 90 working days to complete the order. The model code you list is 24 digits short of the full model code we will need to get an accurate quote. You can learn more about the Model Code from Eaton’s literature.

The PVM074MR12GS02AAE0020000AA0A is not in production. It can be made but the lead time is approximately 18 weeks and your cost would be approximately 2600.00$ (2/10/11).

There is a PVM074MR12GS02AAE0020000BA0A which is in production. The difference being that the auxiliary mounting pad on the back of the PVM pump has an 11 tooth splined shaft instead of a 9 tooth splined shaft.

The production number for the …BA0A is 123AL01453A. The lead time is 14 weeks and the cost is again approximately 2600.00$ (2/10/11).

Yes, you should be able to use the Vickers 25V17 pump (17 GPM) on a log splitter. However, since the 25V is a single stage pump you will want to select a good Log Splitter Valve with a pressure relief to keep from bogging down your motor.

The specific Vickers double vane pump you need will have to be assembled and there is a 3 - 4 week lead time. The double pumps are usually assembled to order.

The GPM and Displacement Ratings are performed at 1200 RPM’s.

If you could tell which vane pump specifically, I could find the appropriate graph for you showing the variation in displacement relative to RPM, otherwise you can search through the Eaton / Vickers literature.