|
|
|
Mfr.
Borg-Warner
| Mfr No. 1004-650-001
Heavy Duty Transmission Damper Plate for Cummins & Cat, 1004-650-001. 13" x 7/8" Diameter, 8 bolt, 26 splines, 10 springs...
|
$227.34
|
|
Mfr.
Osco Motors
| Mfr No. TO9PR
- Fits all Warner Velvet Drive transmissions, as well as most Paragon transmissions
- Mounts 4-5/6" above centerline of transmission on 3-11/18" bolt cente
...
|
Request Availability
|
|
Mfr.
Velvet Drive Gears
| Mfr No. 1004-650-003
- Normally used on Perkins 6-354 and GM 4.53 engines
- 26 spline, 7.98" diameter, 8 hole damper plate
- Used with Hurth and Borg-Warner/Velvet D
...
|
$397.06
|
|
Mfr.
Velvet Drive Gears
| Mfr No. 1004-650-006
- Damper plate AS4-K2C (DA-106)
- 6.66" Radius (Triangle)
- 1.353" 26 Tooth Spline
- Fits most V6
...
|
$74.62
|
|
Mfr.
Velvet Drive Gears
| Mfr No. 71C-3A16
Remanufactured 71 C Transmission
|
$434.67
|
|
Mfr.
Velvet Drive Gears
| Mfr No. 71-35
Reverse Clutch Piston
|
$114.14
|
|
Mfr.
Velvet Drive Gears
Velvet Drive dipsticks for 71C and 72C series gears. NOTE: Photo will not be accurate for all models.
|
$52.36
-
$63.76
|
|
Mfr.
Barr Marine by EDM
| Mfr No. AS7-K2C
Barr, Torsional Damper, Drive Plate 13.25" 26 Spline, 8 Spring. Full circle damper 13.25” diameter...
|
$164.79
|
|
Mfr.
Barr Marine by EDM
| Mfr No. AS4-K2C
Barr, Torsional Damper, Drive Plate, 3 Wing Small Block V8 14". Three-legged damper...
|
$107.14
|
|
Mfr.
Barr Marine by EDM
| Mfr No. AS7-K1C
Barr, Torsional Damper, Drive Plate, 7.12", 26 Spline V8. 7.12" diameter damper...
|
$160.27
|
|
Mfr.
Barr Marine by EDM
| Mfr No. AS8-K2C
Barr, Torsional Damper, Drive Plate, 26 Spline, V8. Three legged damper...
|
$104.17
|
|
Mfr.
Borg-Warner
Borg Warner Velvet Drive Rebuild Parts...
|
$6.24
-
$246.09
|
|
|
Mfr.
Borg-Warner
| Mfr No. 1004-650-007
- Fits Ford Lehman Part 2L7
- Big Block Gas Engines
|
$125.25
|
|
Mfr.
Buck Algonquin
Buck Algonquin, Transmission, Shaft Couplers, Spilt...
|
$78.01
-
$499.97
|
|
Mfr.
Buck Algonquin
Buck Algonquin, Transmission, Shaft Couplers, Tapered...
|
$116.64
-
$116.64
|
|
Mfr.
Chrysler Marine
| Mfr No. 0007770E
Chrysler Small Block Flywheel Ring Gear
|
$125.00
|
|
Mfr.
Chrysler Marine
| Mfr No. 2803410R
Flywheel
|
$180.00
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 2846925R
Flywheel
|
$264.00
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 2846768R
Flywheel
|
$264.00
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 0006901E
Flywheel Hsg. M318 A B C
|
$187.20
|
|
Mfr.
Chrysler Marine
| Mfr No. 0007670E
Flywheel with Ring Gear, Chrysler Big Block...
|
$382.66
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 3410916R
Flywheel, Unblalanced, 130 Teeth, 3410916R
|
$180.00
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 2843211R
Flywheel-Lm318/Dana 1973 Lg T
|
$246.00
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 0007670ER
Remanufactured Flywheel
|
$192.00
|
|
Mfr.
Chrysler Marine
| Mfr No. 2658457R
Remanufactured Harmonic Balancer
|
$469.50
|
|
Mfr.
Chrysler Marine
| Mfr No. 2658458R
Remanufactured Harmonic Balancer
|
$240.00
|
|
|
Mfr.
Chrysler Marine
| Mfr No. 0007120E
Sleeve-Reverse Damper Assy Bb
|
$131.29
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 7070840
Balancer ASM CR/SHF, 7070840...
|
$219.82
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. R090329
Bracket Trans Mount(Rear Star)
|
$118.86
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. RK160014
Clutch Pak Kit (40X)
|
$283.45
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. R140019
Crusader Damper Plate For: 4.3 5.0 7.4 & 8.2L
|
$323.44
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. R090217
Crusader Engine / Transmission Mount Bracket, 207166...
|
$136.13
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 98298
Damper - Plate 262/454 5000Hth
|
$195.19
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 97334
Crusader Pleasurecraft, Damper Plate Dr 454/502 Cid, 97334...
|
$144.60
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. R140018
Damper Plate 8.1L
|
$296.46
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 98241
Damper Valve Assy Tee Rh
|
$202.15
|
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. RK107025A
Dist Kit (Protec Retro Kit)
|
$648.86
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 7070410
Gear - 12 3/4" Flywheel Ring
|
$83.25
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. R140001
Ford Small Block Damper Plate
|
$283.24
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 7070070
Gear - 14" Flywheel Ring
|
$129.40
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. RA045007N
Hsoe (8.1) 406 X42"
|
$62.06
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 22624
Hose - Assy #10 X 44.5" Oal
|
$70.32
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 22672
Hose - Assy #10 X 61" Oal
|
$96.14
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 18102
Hose - Assy #10X17.25" Remote
|
$50.28
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 18100
Hose - Assy #10X39" Remote
|
$68.89
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 18101
Hose - Assy #10X43" Remote
|
$74.42
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 22619
Hose - Assy #8 X 44" Oal
|
$88.14
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 22623
Hose - Assy #8 X 44" Oal
|
$85.28
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 22622
Hose - Assy #8 X 46" Oal
|
$117.00
|
|
Mfr.
Crusader / Pleasurecraft (PCM)
| Mfr No. 22621
Hose - Assy #8 X 64"Oal
|
$53.25
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about Transmission Parts to our online boating community.
Do you supply a Velvet Drive 5000 to Yanmar 4LH-DTE
Want to hook up Velvet Drive 5000 Series 2.8:1 to Yanmar 4LH-DTE (170 hp at 3200 rpm) that already has a 1:1 Borg Warner on it; what, if anything will I need and how much for shipping to Bascom Fl 32423. Submitted by: w1535
You will need a Bell Housing adapter #3311116008 and drive plate 3312316005. You are looking at about .00 (7/30/2010).
Do you have Paragon transmission parts?
We need to replace the nut on our Paragon SA-1 (SA0?) tranmission. We replaced the seal but the nut was destroyed when taking it off the transmission. What part do we need and do you offer it for sale? Submitted by: Kyla
You will need to get the full model number for the transmission. The SA-1 and the SAO are entirely different and there are several variations of each depending on which engine they are being used with. There should be a tag on the transmission with that information. If not, you will have to get dimensions from the nut or the flange.
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
