|
|
|
Mfr.
Taylor Made
Hatch replacement parts for Taylor made hatches. Fits model years 1990 to present.
|
$55.30
-
$74.08
|
|
Mfr.
API Marine
Hydro-Hatch Lift System, Hydraulic Ram Lift. Marine grade stainless steel and aluminum construction...
|
$6.97
-
$618.99
|
|
Mfr.
Lenco
Lenco Electronic Hatch Lifts. Stainless steel ram locks in any position...
|
$276.90
-
$386.55
|
|
Mfr.
Marine Works by Sierra
| Mfr No. GS62850
Nautalift Lift Support Brackets. Works with the Nautalift gas lift supports...
|
$9.77
|
|
Mfr.
Marine Works by Sierra
| Mfr No. GS62920
Nautalift Lift Support Bracket Ball Stud. Works with the Nautalift gas lift supports...
|
$11.33
|
|
Mfr.
Marine Works by Sierra
Nautalift Lift Support Brackets, 90 Degree. Stainless Steel construction or black painted Zinc coated steel, angled bracket with 10mm ball stud...
|
$12.05
-
$13.08
|
|
Mfr.
Moonlite Marine
| Mfr No. 0115-1
Large Automatic Hatch Holder. Automatically locks in place and releases easily when spring is bent...
|
$57.42
|
|
Mfr.
Moonlite Marine
Small Automatic Hatch Holder. Useful for lids, doors, hatches and table leaves...
|
$14.85
-
$25.10
|
|
Mfr.
Perko
| Mfr No. 797DP0CHR
Perko, Hatch Adjuster, Side Mount. Chrome plated brass and zinc alloy...
|
$100.57
|
|
Mfr.
Perko
| Mfr No. 0762DP2CHR
Perko, Hatch Support Braces, Chrome Plated Brass...
|
$101.32
|
|
Mfr.
Sea-Dog
| Mfr No. 321291-1
Sea-Dog, Hatch Adjuster, Stainless / Nylon...
|
$22.92
|
|
Mfr.
Sea-Dog
| Mfr No. 321650-1
Sea-Dog, Hatch Spring, Stainless. Has an internal wire that prevents the spring from being over-extended during normal use...
|
$13.59
|
|
Mfr.
Sierra
Nautalift Gas Lift Supports, Marine Grade. Exact OEM replacement gas filled lift supports...
|
$20.03
-
$35.63
|
|
Mfr.
Attwood Marine
Attwood Marine and RV Gas Springs...
|
$16.28
-
$26.13
|
|
Mfr.
Lenco
| Mfr No. 70381-001
Slide Bracket, Stainless Steel, Non-Locking, 70381-001...
|
$49.80
|
|
Mfr.
Perko
Chrome Plated Brass. Sold by the pair. Note: illustration is port side
|
$124.27
-
$133.07
|
|
Mfr.
Sea-Dog
| Mfr No. 321670-1
Hatch Springs are made of formed 7 stamped 304 stainless steel. Ideal for use on lighter hatches, dock boxes and
|
$22.53
|
|
Mfr.
Sea-Dog
| Mfr No. 321680-1
Hatch Springs are made of formed 304 stainless steel injection molded nylon. Big, heavy-duty spring that is idea
|
$33.02
|
|
Mfr.
Sea-Dog
| Mfr No. 321292-1
Formed and Stamped 304 Stainless/Nylon.
|
$26.53
|
|
Mfr.
Sea-Dog
Formed and Stamped 304 Stainless/Nylon.
|
$24.53
-
$25.34
|
|
Mfr.
Uflex
Uflex designed the AV-L Series Electromechanical Marine Hatch Lifters for use on high performance, pleasure boats or where a hatch could open unintentionally. These hatch lifters stay...
|
$374.97
-
$439.97
|
|
Mfr.
Vetus
| Mfr No. UITSTELPH
Vetus Stainless Steel Hatch Adjusters, 8 - 14 1/2"...
|
$43.43
|
|
Mfr.
Whitecap
Black Nitrate or Stainless Steel Gas Springs from 7-1/2" to 20" L when fully extended...
|
$2.11
-
$86.15
|
|
Mfr.
Whitecap
304 Stainless Steel Spring Hatch Holder, use Fastener #8
|
$18.62
-
$21.78
|
|
Mfr.
Whitecap
| Mfr No. S-0218
316 Stainless Steel Spring Hatch Holder, use Fastener #8
|
$45.18
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 25 of 25
|
Page:
1
|
Post a question or comment about Hatch Lifts & Gas Springs to our online boating community.
What do I need to use with the Electronic Hatch Lifts by Lenco, 1200S?
I want to use the Electronic Hatch Lifts by Lenco, 1200S to lift the bed of a custom ’32 Ford pick up truck which weighs a few hundred LBS. What else will I need from you and will this part do the job? Submitted by: Bill
It will be best to have a relay in between the switch and lift, otherwise the switch will most likely fail prematurely. We recommend using the Continous Duty Starter Solenoid.
Is there a way to make this Lift Support open partially?
I purchased two of the Nautalift Gas Lift Supports, 20" to go on my 18 foot manta ray for the hood. I do not need the the shocks to go the entire 20" when open, so is there a way to compress these so I can install? Submitted by: Ricky
The Nautalift Gas Lift Supports, 20" must open or close completely. There is not a way to make it open part of the way. You will need to measure your opening and order the correct length for your application, or move the attachment point to accommodate the fully open length.
spring lift
I own a 2000 Chapparal Sunesta and I need the gas springs (2) thaty hold the engine compartment open. They are made by Spring Lift Model # 29-30. Can anyone help? Submitted by: chapparal owner
We have a variety of Gas Springs but will need to match dimensionally with what you have.
The lifting point weight of my cover is 80 pounds...
The lifting point weight of my cover is 80 pounds. Does this mean I need two 40 pound lift supports or two 80 pound lift supports? Submitted by: Dave W
I am looking for a gas lift spring for the rear window of my L4200 kubota tractor
I am looking for a gas lift spring for the rear window of my L4200 kubota tractor. the extended length is 14" and the window is approx 10lbs. Submitted by: bob
We have variety of Lift Supports that may work but nothing specific. You will need to know compacted length before you order.
Show older >>
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
