|
|
|
Mfr.
Seakamp Engineering
Chrysler Marine direct replacement heat exchanger allows use of hot water cabin heater in cooler climates. Chrysler built engines, powerboats and sailboats...
|
$33.93
-
$877.49
|
|
Mfr.
API Marine
| Mfr No. 20037
Small Frame Alternator, 78 Amp, 12v (Volt), 20037. Fits Acadia, Crusader, Lathrop, OMC, Owens, Starrett, Universal and Chrysler...
|
$184.99
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-6674-P
Barr, Mounting Kit for Raw Rater Cooled Manifold,CM-1-6672-A...
|
$8.50
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-5972-A
Direct Replacement Chrysler Big Block Teardrop Shaped Exhaust Manifold, 1959 up, CM-1-5972-A. Fits Chrysler V8 361, 383, 400, 413, 426 & 440 C.I. from 1959 & up...
|
$292.81
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-6672-A
Direct Replacement Chrysler Small Block Exhaust Manifold, 1966 - 1972, CM-1-6672-A. Used from 1966-1972 Fits 318/340/360 cu. In. Chrysler...
|
$221.92
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-6677-A
Direct Replacement Chrysler Small Block Exhaust Manifold, 1973 - 1986, CM-1-6677-A...
|
$244.86
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-4142411
Swivel Exhaust Riser, CM-20-4142411, replaces Chrysler # 3745639, 2847623, 2847404 and E9233M...
|
$238.33
|
|
Mfr.
Barr Marine by EDM
End Plate Gaskets, CM-1-6672-J, CM-1-6672-D, sold as Pack of 5...
|
$20.00
-
$20.00
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-6672
Exhaust Elbow, 20 Degree, CM-20-6672, replaces Chrysler #3527794...
|
$132.11
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-2847405
Exhaust Elbow, 90 Degree, CM-20-2847405, replaces Chrysler # 2847405, 2469639...
|
$140.62
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-5972P
Exhaust Manifold Gasket Set , CM-1-5972P, 1 required per engine...
|
$11.55
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-5972GP
Exhaust Manifold Mounting Kit, CM-1-5972GP for Chrysler exhaust manifold...
|
$17.00
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-5972-D
Exhaust Manifold Water Distribution Tube, CM-1-5972-D. Replaces original copper tube, where applicable...
|
$63.17
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-6672-E
Exhaust Manifold Water Distribution Tube , CM-1-6672-E, replaces original tube, where applicable...
|
$41.54
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-6674
Exhaust Riser, 6", CM-20-6674, replaces Chrysler # 2846689...
|
$128.57
|
|
Mfr.
Barr Marine by EDM
| Mfr No. OR-10-66
Flame Arrestor, OR-10-66...
|
$69.09
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-6672-B
Front End Plate Without Water Connector, CM-1-6672-B, will fit both Chrysler manifold styles...
|
$32.73
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-6672-H
Front End Plate With 1/2" npt , CM-1-6672-H for both Chrysler manifold styles...
|
$39.00
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-5972-B
Front End Plate, CM-1-5972-B, 1 required per manifold...
|
$38.52
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-2600402
Lower Exhaust Elbow, CM-20-2600402, replaces Chrysler # 2600402...
|
$142.61
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-9234
Lower Exhaust Elbow, CM-20-9234 for Chrysler exhaust...
|
$137.88
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-5972SSP
Mounting Kit for Exhaust Manifold, CM-1-5972SSP for Chrysler exhaust manifold...
|
$36.00
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-9234P
Mounting Kit for Lower Exhaust Elbow, CM-20-9234P...
|
$15.00
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-9232P
Mounting Kit, 6" Riser Extension , CM-20-9232P, for Chrysler exhaust riser...
|
$39.69
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-6672J P
Mounting Kit, Exhaust Elbow, CM-20-6672J P for Chrysler exhaust manifold...
|
$9.00
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-1-6677SSP
Mounting Kit, Exhaust Manifold, CM-1-6677SSP for Chrysler Exhaust Manifold...
|
$33.70
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-6674JP
Mounting Kit, Exhaust Riser, CM-20-6674JP for Chrysler exhaust...
|
$8.50
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-6674P
Mounting Kit, Exhaust Riser, CM-20-6674P for Chrysler exhaust...
|
$9.50
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-4142411P
Mounting Kit, Swivel Exhaust Riser, CM-20-4142411P, for Chrysler exhaust...
|
$38.77
|
|
Mfr.
Barr Marine by EDM
| Mfr No. 1-73813
Rear End Cap for Log Style Exhaust Manifold, 1-73813...
|
$22.92
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-9232
Riser Extension, 6", CM-20-9232, replaces Chrysler # E9232M...
|
$129.17
|
|
Mfr.
Barr Marine by EDM
| Mfr No. CM-20-9224
Stainless Steel Sleeve , CM-20-9224, replacement Exhaust sleeve for OSC5639. Replaces Chrysler #3527087 and #E9224M...
|
$25.67
|
|
Mfr.
Champion
For over 100 years Champion Spark Plug has been a world leader in the manufacture of spark plugs for every kind of marine combustion engine...
|
$4.00
-
$58.04
|
|
Mfr.
Delco-Remy
AC/Delco, Spark Plugs, Marine Spark Plugs for your Marine engine...
|
$25.19
-
$37.92
|
|
Mfr.
NGK
Since 1936 NGK has built itselt to be the world's leading spark plug manufacturer with factories and sales offices in all parts of the world...
|
$2.15
-
$59.13
|
|
Mfr.
Osco Motors
| Mfr No. 7087-MK
Exhaust Elbow and Extension Mounting Kit, 7087-MK...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 480
Exhaust End Plate Gasket, 480, fits end plates and elbow...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 826
Exhaust Manifold 318-360 CID Small Block V8, 826, exact manifold replacement for Chrysler #'s 24695566 and 3675826l...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 5639-CL
Exhaust Manifold Clamp Set, 5639-CL...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 794
Exhaust Manifold Elbow, 794, replaces Chrysler # 3527794...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 106
Exhaust Manifold Front Plate, 106 replaces Chrysler # 2846104...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 826-GH
Exhaust Manifold Gasket Set, 826-GH...
|
Request Availability
|
|
Mfr.
Osco Motors
Exhaust Manifold Gasket and Mounting Kits, 826-MK-SS, 826-MK, 826-SS...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 121
Exhaust Manifold Gasket, 121 for Chrysler big block V8
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 480-FW
Exhaust Manifold Gasket, 480-FW for Chrysler V8...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 7081-GH
Exhaust Manifold Gasket, 7081-GH, for Chrysler big block V8...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 0402
Exhaust Manifold Lower Elbow, 0402, replaces Chrysler # 2600402...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 9234
Exhaust Manifold Lower Elbow, 9234, replaces Chrysler #'s 3527087 and E9924M...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 121-MK
Exhaust Manifold Mounting Kit, 121-MK...
|
Request Availability
|
|
Mfr.
Osco Motors
| Mfr No. 480-MK
Exhaust Manifold Mounting Kit, 480-MK...
|
Request Availability
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Go2marine carries a complete selection of marine engine parts for Chrysler Inboard Engines and related cooling, electrical, exhaust, fuel, internal and drive systems. Contact our experienced Chrysler Marine Engine mechanics to help you choose the correct part for your Chrysler Marine Inboard...
Full Print Catalogs in PDF format,Cross-Reference Charts, Application Guides, & More...
Post a question or comment about Chrysler Inboard Engine Parts to our online boating community.
318 crysler marine engine
Im looking for a raw water pump. I have a 1977 318 crysler marine motor stock in a 1977 trojan sadan. Submitted by: donna
Need engine thermostat gasket and fuel pump for Chrysler 225 marineM series 1976
Chrysler 225 M Series Year 1976:
Need engine thermostat 140 and gasket Need fuel pump Submitted by: cemc1945
Sorry cannot confirm parts for that engine but here is what works on the 318 engine, Chrysler part number is 2463441. We do not have a gasket.
oil filter
I installed high volume oil pumps on my Chrysler 318s can I still use a standerd oil filter? Submitted by: mr elevman
As long as you don’t exceed 80psi.
I'm looking for heat exchangers for my Chrysler marine diesel on my boat
I’m looking for heat exchangers for my boat .I have Chrysler marine diesel motors cm6-55NA part #4142016 Submitted by: Kevin Downs
We don’t have anything that vintage that will drop right in. We can offer you custom heat exchangers.
Hard Starting with twin Chrysler 318's I/O's...
I have a 1970 Gibson Houseboat with twin Chrysler 318’s I/O. I have changed the points to electronic ignition and replaced the coils, but it is still hard to start. The carburetors have been rebuilt. Sometimes it takes me 5 minutes of cranking to get them started. I was thinking it sounded like a fuel delivery problem. I was thinking of going with either an aftermarket fuel pump an blocking of the mechanical fuel pump and replacing it with an electric pump. Once they are running, they run great, just hard to start Submitted by: Derek
The fuel pump is not the problem. Look at the carburetor choke. Make sure the carburetor butterfly is completely closed when the engine is cold.
Show older >>
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
