|
|
|
Mfr.
Ancor
Adhesive Lined. Ancor provides a full line of adhesive-lined heat shrink products to enviromentally seal electrical connections. T
|
$3.45
-
$80.44
|
|
Mfr.
Ancor
Adhesive Lined Fork Terminals. The flanged tips of these terminals makes it less likely for them to slip off the stud accidentally under
|
$26.72
-
$32.17
|
|
Mfr.
National Standard Parts Associates
These Sealed Crimp Spring Spade Connectors are the finest "crimp-and-seal" connectors on the market today.
|
$22.27
-
$246.26
|
|
Mfr.
National Standard Parts Associates
These Sealed Crimp Flanged Spade are the finest "crimp-and-seal" connectors on the market today.
|
$25.69
-
$253.21
|
|
Mfr.
National Standard Parts Associates
Ring Terminals, Crimp Style, Heat Shrink Sealed. Translucent, adhesive lined polyolefin tubing allows for visual inspection, prevents wire corrosion and provides a waterproof seal...
|
$21.92
-
$395.49
|
|
Mfr.
National Standard Parts Associates
Bullet Plugs & Receptacles, Crimp Style, Heat Shrink Sealed. Translucent, adhesive lined polyolefin tubing allows for visual inspection, prevents wire corrosion and provides a waterproof seal...
|
$22.48
-
$278.93
|
|
Mfr.
National Standard Parts Associates
The Multilink Sealed Crimp & Solder Connectors are crimped for reliability, soldered for superior strength and conductivity and sealed for maximum durability...
|
$75.42
-
$95.28
|
|
Mfr.
National Standard Parts Associates
Translucent, adhesive lined polyolefin tubing allows for visual inspection, prevents wire corrosion and provides a waterproof seal...
|
$23.43
-
$267.50
|
|
Mfr.
National Standard Parts Associates
Butt Connectors, Heat Shrink Sealed, Step Down. Translucent, adhesive lined polyolefin tubing allows for visual inspection, prevents wire corrosion and provides a waterproof seal...
|
$37.69
-
$837.71
|
|
Mfr.
National Standard Parts Associates
Butt Connectors, Hydralink, Multiple Wire In-Line. The Hydralink In-Line Butt Connector is for multiple wires and is sealed for superior durability and protection...
|
$72.37
-
$127.70
|
|
Mfr.
National Standard Parts Associates
Closed End Connectors, Hydralink Multiple Wire . The Hydralink Closed End Connectors are crimped and have an active adhesive that seals between multiple wires and eliminates wire pull out...
|
$40.74
-
$52.58
|
|
Mfr.
National Standard Parts Associates
Translucent, adhesive lined polyolefin tubing allows for visual inspection, prevents wire corrosion and provides a waterproof seal...
|
$30.05
-
$351.74
|
|
Mfr.
Ancor
- Tinned copper for maximum corrosion resistance and greatest electrical conductivity
- Grooved barrel grips wire to provide superior holding power and current fl
...
|
$2.96
-
$46.29
|
|
Mfr.
Ancor
- Tinned copper for maximum corrosion resistance and greatest electrical conductivity
- Grooved barrel grips wire to provide superior holding power and current fl
...
|
$2.78
-
$60.35
|
|
Mfr.
Ancor
- Tinned copper for maximum corrosion resistance and greatest electrical conductivity
- Grooved barrel grips wire to provide superior holding power and current fl
...
|
$3.05
-
$40.89
|
|
Mfr.
Ancor
Nylon Insulated Forked Terminals. The flanged tips of these terminals makes it less likely for them to slip off the stud accidentally under margina
|
$2.96
-
$41.50
|
|
Mfr.
Ancor
| Mfr No. 220612
Spade Disconnect Terminals - Nylon. Nylon insulted; double crimp. Tinned copper. 0.250" Tab. Sold by the package
|
$59.24
|
|
Mfr.
Ancor
Male & Female Bullet Style Disconnects
|
$38.30
-
$44.79
|
|
Mfr.
Ancor
Ancor, Nylon Double Crimp 3-Way Connector
|
$27.38
-
$30.28
|
|
Mfr.
Ancor
Vinyl Insulated. Used to join a pair of conductors to a third, all of the same size or two conductors of different sizes. The smaller end is banded
|
$4.43
-
$26.69
|
|
Mfr.
Ancor
| Mfr No. 230613
- Uninsulated connector
- Wire Range of 16-14
- .250 tab
|
$3.05
|
|
Mfr.
Ancor
| Mfr No. 230718
Snap Plug, Male
|
$3.13
|
|
Mfr.
Ancor
| Mfr No. 230612
- Nylon insulated connector
- Wire Range of 16-14
- .250 tab
|
$2.78
|
|
Mfr.
Ancor
- Deep serrations in barrel grip wire to exceed UL specifications
- Highest grade electrolytic copper, tin plated for greatest corrosion resistance and least p
...
|
$3.05
-
$26.09
|
|
Mfr.
Ancor
| Mfr No. 701009
Crimp 10-22 AWG insulated and non-insulated terminals and coaxial connectors . Cut and strip 8-22 AWG solid and 10-24 AWG stranded wire .
|
$28.83
|
|
Mfr.
Ancor
| Mfr No. 702017
Ratcheting action ensures positive crimps. Release lever. Two nests in crimp cavity simultaneously crimp conductor and insulation for maximum str
|
Request Availability
|
|
Mfr.
Ancor
| Mfr No. 701030
- Ratcheting mechanism to insure a complete cycle of tool
- Makes UL approved crimps
- Compound action for operator ease
- Crimps insulated doub
...
|
$74.77
|
|
Mfr.
Ancor
| Mfr No. 702033
Strips 26 to 10 AWG stranded wire. Automatic jaw-load wire stripper self-adjusts to strip wire. Crimps 22-10 AWG insulated terminals
|
$25.23
|
|
Mfr.
Centarr
| Mfr No. 72HSTK
72 Piece Offshore Heat Shrink Tubing Kit, Electrical. Complete Heat Shrink kit contains nearly 30' of heat shrink tubing in sizes from 1/8" to 3/4". Cut to easy to use 8" lengths...
|
$98.15
|
|
Mfr.
Ancor
| Mfr No. 701007
This tool has precision ground cutters and stripping station with a wide crimp range of insulated and non-insulated terminals. "Box" cri
|
$40.41
|
|
Mfr.
Ancor
| Mfr No. 702005
Ancor, Wire and Cable Cutter, 639-702005. These Ancor wire cutters are compact in size to fit in a pocket. They easily cut non-ferrous power, battery, starter and welding cables...
|
Request Availability
|
|
Mfr.
Ancor
| Mfr No. 304506
- Cross linked polyolefin tubing is much stronger than PVC tubing
- Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunligh
...
|
$10.55
|
|
Mfr.
Ancor
| Mfr No. 702040
Calibrated adjustment screw
Compound lever action prevents operator fatigue
Capacity: crimps 8 - 4/0 AWG lugs and terminals
|
$213.10
|
|
Mfr.
Marinco
| Mfr No. 701010
US made. Spring loaded pivot bar. Designed for use with a hammer or vise. Makes UL approved crimps. Crimps 6 - 4/0 AWG lugs and 6 - 3⁄0 AWG
|
$106.13
|
|
Mfr.
Spectro Wire and Cable
- Made of SXL-Polyolefin
- Chemical and oil resistant
- Shrinks well over irregular shapes
- Radial shrinkage of 50 percent
- Longitudinal sh
...
|
$0.12
-
$0.16
|
|
Mfr.
Ancor
Ancor, Adhesive Lined Heat Shrink Butt Connectors. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief...
|
$3.51
-
$103.61
|
|
Mfr.
Ancor
- Perfect for wire and hoses
- Provides low cost watertight cable entries
into panels and junction boxes - Works with round cable
- Simple to in
...
|
$6.33
-
$9.96
|
|
Mfr.
Spectro Wire and Cable
- Perfect for grouping wires
- Offers excellent abrasion protection
- Black
- Slit for easy insertion or removal of wires
- Temperature range
...
|
$0.52
-
$3.59
|
|
Mfr.
Spectro Wire and Cable
- Perfect for grouping wires
- Offers excellent abrasion protection
- Black
- Slit for easy insertion or removal of wires
- Temperature range
...
|
$0.44
-
$0.84
|
|
Mfr.
Ancor
Ancor, Adhesive Lined Heat Shrink Wire Disconnects. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Nylon insulator, prefer
|
$33.78
-
$188.77
|
|
Mfr.
Ancor
| Mfr No. 300145
White write on tubing is a flattened tube of white heat shrink tubing held by polyester strips which allows the tubing to feed through mos
|
$18.87
|
|
Mfr.
Ancor
| Mfr No. 404202
Stainless Steel. T304 stainless steel for corrosion resistance. Annealed for flexibility. EPDM insulator is temperature, water, fuel, oil and acid
|
$21.05
|
|
Mfr.
Ancor
| Mfr No. 404252
Stainless Steel. T304 stainless steel for corrosion resistance. Annealed for flexibility. EPDM insulator is temperature, water, fuel, oil and acid
|
$24.82
|
|
Mfr.
Ancor
| Mfr No. 404302
Stainless Steel. T304 stainless steel for corrosion resistance. Annealed for flexibility. EPDM insulator is temperature, water, fuel, oil and acid
|
$26.41
|
|
Mfr.
Ancor
100% Tinned Copper. Heavy duty, pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strengt
|
$4.52
-
$186.50
|
|
Mfr.
Ancor
| Mfr No. 400000
- Marine GradeTM Cable Clamps
- Made from nylon for maximum strength
- Resistant to solvents, oils, acids and moisture
...
|
$4.94
|
|
Mfr.
Ancor
| Mfr No. 374505
Made from nylon for maximum life and are impervious to salt, chemical solvents and acids.
|
$21.97
|
|
Mfr.
Ancor
- Permits flexible routing of cable harnesses
- Provides abrasion protection for wire and cable
- Allows lead outs at any point for greatest ease of
...
|
$9.33
-
$10.16
|
|
Mfr.
Ancor
- Made from pure nylon 66 for maximum life
- Impervious to salt, chemical solvents and acids
- Heavy duty locking mechanism
|
-
|
|
Mfr.
Blue Sea Systems
Blue Sea Systems, Cable Clams, Waterproof Co-axial Connectors. Provides a waterproof pass-through for antenna cables without requiring removal of the factory installed connector...
|
$18.89
-
$22.99
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about Electrical Wire & Wiring Supplies for Boats to our online boating community.
Wire Corrosion
My friend is telling me that electricity mainly travels along the outside surface of a wire. This is very hard be believe….why would electrons not move thoughout the complete cross section of a wire. Thus corrosion on the outer surface of a single strand wire could potentially cut of the flow of electricity.
Is this baloney or what?? Submitted by: Steve
It depends on what type of electric current you are talking of. In case of AC current,the inductance decreases from center towards the surface of the wire. As current flows through the path of least resistance, it flows through the surface of the wire which provides path of least Reactance. This phenomena where current flows through the surface due to least reactance is known as "Skin effect". While in case of DC current the inductance part is missing as there is no change in flux with respect to time. So the resistance is same through out the conductor. Hence DC current flows through out the wire cross-section. If,you visit any power GRID you’ll see the bus bars are hollow. This is because current flows through the outer surface so bars are kept hollow to carry same current, avoiding material wastage.
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
