|
|
|
Mfr.
Blue Water Marine Paint
Marine Bottom Paint, Copper Shield Hard 45, Full Season Protection. A high cuprous oxide content (45%) with a coating that provides a modified epoxy technology...
|
$118.67
-
$118.68
|
|
Mfr.
MAS Epoxies
Bio-Solv is an environmentally friendly solvent that can be used in place of Acetone, Xylene, MEK, thinners and other petroleum-based solvents...
|
$17.03
-
$1,299.99
|
|
Mfr.
Blue Water Marine Paint
| Mfr No. 8000A/ 8000B
Marine Paint, Bottom Protect, High Build Epoxy Primer, Gelcoat Blister Repair. Provides a seamless high build epoxy coating, seamless high build epoxy creates a impermeable water barrier...
|
$66.37
|
|
Mfr.
Blue Water Marine Paint
| Mfr No. 974G
Marine Paint, Reducer / Thinner, Compatible with Antifoulings, Primers & Enamels. Improves the application and the flow of coatings for brushing and rolling...
|
$21.18
|
|
Mfr.
Blue Water Marine Paint
Marine Bottom Paint, Copper Pro SCX 67, Slime Control Extra, Boosted Ablative, Multi Season Protection. Highest performance ablative copolymer performance product on the market today...
|
$175.00
-
$201.86
|
|
Mfr.
Blue Water Marine Paint
Marine Bottom Paint, Copper Shield 45, Ablative, Full Season, Protection. A high cuprous oxide content (45%) with a coating that provides a self-polishing ablative technology...
|
$131.18
-
$131.18
|
|
Mfr.
Blue Water Marine Paint
Marine Paint, Armada Wood Finishes, Dark Translucent, Gloss or Satin. Unique high performance interior and exterior wood treatments...
|
$77.09
-
$77.09
|
|
|
Mfr.
Blue Water Marine Paint
Marine Paint, Armada Wood Finishes, Original Translucent, Gloss or Satin. Unique high performance interior and exterior wood treatments...
|
$89.93
-
$89.93
|
|
Mfr.
Blue Water Marine Paint
| Mfr No. 8001A/ 8001B
Marine Paint, Bottom Protect, High Build Epoxy Sealer, Gelcoat Blister Repair. A clear high build epoxy sealer for use when gelcoat and fiberglass laminate requires sealing...
|
$111.86
|
|
Mfr.
Blue Water Marine Paint
Marine Paint, Mega Gloss, Topside Polyurethane Enamel, One Part. A technically advanced, single component topside polyurethane enamel...
|
$54.17
-
$54.17
|
|
Mfr.
Blue Water Marine Paint
Marine Bottom Paint, Copper Pro SCX 67, Hard, Full Season Protection, Boosted Modified Epoxy. One of the highest cuprous oxide contents...
|
$190.32
-
$190.32
|
|
Mfr.
Blue Water Marine Paint
| Mfr No. 973G
Marine Paint, Fiberglass Dewaxer, Solvent, Gallon. Removes surface contamination from bare fiberglass such as mold, wax, oil, and grease...
|
$21.18
|
|
Mfr.
Blue Water Marine Paint
Marine Bottom Paint, Kolor (Color) Multi Season Protection, Ablative, 45% Copper, Aluminum & Fiberglass. A multi-season self polishing ablative copolymer, as effective as it is clean & vibrant...
|
$196.09
-
$196.09
|
|
Mfr.
Blue Water Marine Paint
Marine Bottom Paint, Copper Shield SCX 45, Slime Control Extra, Boosted Ablative, Multi Season Protection. A high copper content (45%) in a self polishing ablative technology...
|
$155.71
-
$155.71
|
|
Mfr.
3M
| Mfr No. 501
- Fits 3M 5000 and 6000 series respirators
|
$3.59
|
|
Mfr.
3M
- Emery cloth for general metal sanding, polishing and rust removal
|
$1.96
-
$2.59
|
|
Mfr.
3M
| Mfr No. 051135-08051
- Formulated to allow multiple disc applications without adhesive buildup
- Discs remove easily and cleanly
|
$23.74
|
|
Mfr.
3M
| Mfr No. 051111-10113
Use to clean marine surfaces of stripper residue. Replaces "0" steel wool.
|
$3.24
|
|
Mfr.
3M
- Urethane foam sponge for sanding contoured and hard-to-reach surfaces
- Aluminum oxide abrasive on all four sides
- Reusable, rinse clean, ring out and use
...
|
$3.02
-
$3.02
|
|
Mfr.
3M
- Hook and loop
- Fast cutting
- Long lasting
- Use for stripping and fairing
- Sold individually
|
$1.40
-
$6.00
|
|
Mfr.
3M
| Mfr No. 051131-01552
- Adhesive backed
- Mineral bond construction
- Treated for durability, fast cutting and loading resistance
|
$4.45
|
|
Mfr.
3M
| Mfr No. 051131-01550
- Adhesive backed
- Mineral bond construction and "E" weight backing
- Use where course sanding is required such as hulls and decks
|
$4.11
|
|
Mfr.
3M
| Mfr No. 051111-10111
Tough, durable replacement pads fit 3MTM Heavy Duty Stripping tool. The pads to not rust or splinter like steel wool. Compare to #2 and #3 s...
|
$2.55
|
|
Mfr.
3M
| Mfr No. 051111-10112
Replaces and outperforms #2 steel wool. Non rusting.
|
$2.55
|
|
Mfr.
3M
High Strength Repair Filler, Pint or Quart. This high performance reinforced filler is designed to repair areas of fiberglass hulls, decks, and other parts...
|
$46.64
-
$66.97
|
|
Mfr.
3M
| Mfr No. 06969
General purpose cloth duct tape.
|
$25.33
|
|
Mfr.
3M
| Mfr No. 07414
- Designed for removing light rust
- Cleans and brightens metal
- Will not rust
|
$2.64
|
|
Mfr.
3M
- Aluminum Oxide
- Dry sanding on wood, fiberglass or metal
|
$0.59
-
$48.91
|
|
Mfr.
3M
- Painters grade masking tape
- Not for extended outdoor use
|
$4.69
-
$13.33
|
|
Mfr.
3M
- Four colors available
- Use for phase identification, marking motor leads and piping systems
- Outline safety areas
- Use to mark lines haly
...
|
$6.18
-
$7.59
|
|
Mfr.
3M
| Mfr No. 06143
- 8.5 mil vinyl tape for use in cold weather when other tapes would become brittle and stiff
- Extra thickness provides increased resistance to abrasion.
|
$7.74
|
|
Mfr.
3M
UV stable. Removes cleanly without adhesive transfer or surface damage for up to 14 days-even in direct sunlight. Bright blue for easy identifi...
|
$4.23
-
$11.70
|
|
Mfr.
3M
| Mfr No. 6732
- Resistant to solvent penetration
|
$24.70
|
|
Mfr.
3M
| Mfr No. 35576
- Specially made for use with 3MTM StikitTM sanding discs
- Vinyl pad face
- Lightweigh
...
|
$30.74
|
|
Mfr.
3M
| Mfr No. 051131-01372
- Adhesive backed
- Aluminum Oxide
- Pre-punched 6 hole pattern for dustless sanding
|
$13.53
|
|
Mfr.
3M
- Adhesive backed
- Fast cutting and long lasting
- Resists loading and edge wear
|
$1.66
-
$2.05
|
|
Mfr.
3M
- Adhesive backed
- High performance for tougher marine finishes and gelcoat
|
$1.23
-
$104.63
|
|
Mfr.
3M
| Mfr No. 7413
- Designed for use with Chemical strippers
- Made from tough, non-woven synthetic material that will not rust
|
$2.64
|
|
Mfr.
3M
Combination of synthetic fibers and abrasive particles that work like steel wool. They are easier on the hands than conventional steel wool and resist clogging. They can be r...
|
$3.73
-
$4.33
|
|
Mfr.
3M
| Mfr No. 051144-03192
- Removes dirt, lint, dust and sanding particles prior to painting, varnishing or staining
|
$1.61
|
|
Mfr.
3M
- Silicon Carbide
- Wet or dry sanding
|
$1.47
-
$1.47
|
|
Mfr.
3M
| Mfr No. 07415
- Designed to smooth bare wood, rubbing in oils
- Use to degloss between coats of stain, sealer or varnish
- Will not rust
|
$2.64
|
|
Mfr.
Ancor
| Mfr No. 702024
- 2.5 oz / 71g in weight
- Electronic ignition system with safety locking switch
- Flame temperature up to 1300°C (2500°F)
- Windproof flam
...
|
$23.56
|
|
Mfr.
Bernz-O-Matic
| Mfr No. TS839T
|
$43.43
|
|
Mfr.
Bristol Finish
Bristol Finish's Water Based, Clear Urethane delivers the durability of two part solvent-based products with no mixing or measuring required. This Bristol Finish provides a classic looks...
|
$24.84
-
$24.84
|
|
Mfr.
Bristol Finish
Bristol Finish will look good for 1 to 2 years without maintenance in southern latitudes such as Florida and the Caribbean, and up to 4 years in New England...
|
$14.98
-
$158.85
|
|
Mfr.
Corroseal
- Convert rust into a paintable surface
|
$25.33
-
$287.67
|
|
Mfr.
Epifanes
| Mfr No. CV1000
Clear Varnish by Epifanes is considered by many as the ultimate high gloss marine finish. This is a traditional spar varnish...
|
$38.25
|
|
Mfr.
Epifanes
| Mfr No. WFM1000
Wood Finish Matte is the no sanding required, no gloss, one component varnish alternative with a clear amber color. Woodfinish Matte has been specially formulated for oily woods...
|
$49.74
|
|
Mfr.
Evercoat
Coloring agents work with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and various putties
|
$7.67
-
$8.32
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
