|
|
|
Mfr.
Chicago Hardware
Drop Forged Steel Eye Screws with a standard hot galvanized finish. Loads are based on a safety factor of 5 to 1. When tested all eye bolts are pulled at a uniform rate of speed in a direct...
|
$5.40
-
$8.94
|
|
Mfr.
Chicago Hardware
| Mfr No. 9216
Hot galvanized finish. Not to be used for lifting applications.
|
$21.37
|
|
Mfr.
Forespar
- Use with medium size spinnaker and whisker poles
- Stainless steel
- PE-3SC is curved to better accommodate the curve of the mast
|
$39.90
-
$41.29
|
|
Mfr.
Perko
| Mfr No. 1235DP0CHR
Perko, Bow Eye, Chrome. Zinc alloy plated steel "U" bolt, nuts & washers...
|
$15.98
|
|
Mfr.
Perko
| Mfr No. 1234DP0CHR
Perko, Bow Handle for Daysailors, Chrome, 1234DP0CHR. Chrome Plated Zinc Alloy...
|
$15.35
|
|
Mfr.
Perko
| Mfr No. 1242DP0CHR
Perko, Eye Strap, 1-7/8". Chrome plated zinc alloy....
|
$9.09
|
|
Mfr.
Sea-Dog
Sea Dog, Eyebolt, Machined AISI 304 Stainless, Metric Thread...
|
$13.30
-
$31.29
|
|
Mfr.
Sea-Dog
Sea-Dog, Bow Eye, 3-1/16", 4-5/8". Die cast chrome zinc head, galvanized shaft...
|
$6.21
-
$6.45
|
|
Mfr.
Sea-Dog
Sea-Dog, Bow Eye, Machined AISI 304 Stainless. Comes with adjustable finished nuts as compared to the crimped ring used on most other bow eyes...
|
$7.96
-
$18.52
|
|
Mfr.
Sea-Dog
Sea-Dog, Diamond Eye Plate With Ring, Stamped 304 Stainless...
|
$5.72
-
$9.98
|
|
Mfr.
Sea-Dog
Sea-Dog, Diamond Eye Plate, Cast 316 Stainless Steel. Great for tying off light loads, fenders, etc. Can be used inside or outside the boat...
|
$9.74
-
$17.51
|
|
Mfr.
Sea-Dog
Sea-Dog, Diamond Eye Plates, Stamped 304 Stainless Steel...
|
$4.52
-
$6.58
|
|
Mfr.
Sea-Dog
Sea-Dog, Line Fairlead, Nylon, Sailing Hardware. Designed with a molded-in recess in the base, trapping the sealant in place providing a more watertight seal...
|
$1.14
-
$2.60
|
|
Mfr.
Sea-Dog
| Mfr No. 082615
Sea-Dog, Line Fairlead w/Stainless Steel Insert, Sailing Hardware. Designed with a molded-in recess in the base trapping the sealant in place providing a more water tight seal...
|
$5.93
|
|
Mfr.
Sea-Dog
| Mfr No. 081200-1
Sea-Dog, Line Pad Eye, Forged AISI 304 Stainless Steel...
|
$5.57
|
|
Mfr.
Sea-Dog
Sea-Dog, Oblong Eye Plate, Backing Plate, Stamped 304 Stainless Steel. Great for tying off light loads, fenders, etc...
|
$3.71
-
$6.83
|
|
Mfr.
Sea-Dog
| Mfr No. 081242-1
Sea-Dog, Pad Eye, Die Cast Zinc, Chrome Plated...
|
$4.90
|
|
Mfr.
Sea-Dog
Sea-Dog, Pad Eyes, Forged Bronze Wire, Bronze or Chrome Finish...
|
$2.02
-
$6.11
|
|
Mfr.
Sea-Dog
Sea-Dog, Pad Eyes, Injection Molded Nylon, White, Black...
|
$0.32
-
$2.24
|
|
Mfr.
Sea-Dog
Sea-Dog, Pad Eyes, Stamped 304 Stainless...
|
$0.78
-
$5.26
|
|
Mfr.
Sea-Dog
| Mfr No. 327112-1
Sea-Dog, Rail Mounted Nylon Fairlead, w/ Stainless Insert, Sailing Hardware. Allows easy routing of roller furling lines...
|
$11.30
|
|
Mfr.
Sea-Dog
Sea-Dog, Shoulder Eyebolt, Galvanized. Comparable to Wilcox #2221 series...
|
$2.82
-
$10.86
|
|
Mfr.
Sea-Dog
Sea-Dog, Stern Eye, Adjustable Finished Nuts. Machined AISI 304 stainless steel, comes with adjustable finished nuts...
|
$11.40
-
$18.48
|
|
Mfr.
Sea-Dog
Sea-Dog, Tie Down Eye Strap, Forged Bronze Wire Chrome Plated. Can be used for a mulitple of hold down applications...
|
$5.69
-
$5.98
|
|
Mfr.
Sea-Dog
| Mfr No. 079233-1
Sea-Dog, Twin Shank Bow Eye, Chrome Zinc Head. Die cast chrome zinc head, chrome steel shafts...
|
$11.38
|
|
Mfr.
Sea-Dog
Sea-Dog, U-Bolt, Crimped Ears, Machined AISI 304 Stainless. Metric threads, outer mounting plate is held in place by crimped ears forged into the u-bolt...
|
$10.55
-
$12.66
|
|
Mfr.
Buck Algonquin
| Mfr No. 00BE400
Bow Eyes...
|
$20.83
|
|
Mfr.
Chicago Hardware
| Mfr No. 9020
Hot galvanized finish. Not to be used for lifting applications.
|
$33.43
|
|
Mfr.
Forespar
| Mfr No. 30016
1/4" (6mm) Line. This exit box is made for use with the new high-tech fibers. Uses this new exit on all trip lines and topping lifts. It is sui
|
$15.58
|
|
Mfr.
Harken
316 Stainless Steel. Diamond shaped pad eyes are often used as mast bases where the diamond shape allows them to be mounted very close together.
|
$28.64
-
$35.42
|
|
Mfr.
Harken
17-4 PH Stainless Steel. Pad eyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks and tons more.
|
$92.65
-
$148.91
|
|
Mfr.
Lewmar
1/4" (6mm) to 7/16 (11mm) Line. The D1 clutch is designed for high load applications on boats up to 32 feet, and low load and control line ap
|
$70.43
-
$184.88
|
|
Mfr.
Lewmar
5/16" (8mm) to 9/16" (14mm). The new D2 line clutches are designed for high load applications on boats up to 55' and low load and con
|
$91.79
-
$233.20
|
|
Mfr.
Ronstan
316 Stainless Steel
|
$23.89
-
$26.44
|
|
Mfr.
Schaefer Marine
Investment Cast 304 Stainless Steel. These are good-looking, substantial pad eyes with thick bases and heavy bails. With a safe working load of
|
$45.47
-
$73.85
|
|
Mfr.
Schaefer Marine
| Mfr No. 78-22
304 Stainless Steel. The 78-71 U-bolt bow eye has a curved base to fit rounded stems on small boats and a flat backing plate . The 78-22 is compri
|
$55.45
|
|
Mfr.
Schaefer Marine
| Mfr No. 78-83
Stainless Steel . Schaefer's removable eye deck plate allows for easy attachment of snap shackles, snatch blocks or lashing straps.. Welded eye scre
|
$165.51
|
|
Mfr.
Schaefer Marine
| Mfr No. 78-37
316 Stainless Steel
|
$23.26
|
|
Mfr.
Schaefer Marine
| Mfr No. 76-05
Injection Molded Nylon. Fairleads allow easy and smooth line leads.
|
$23.39
|
|
Mfr.
Schaefer Marine
304 Stainless Steel. Schaefer's welded pad eyes are fabricated from stainless steel rod with stamped bases. . Thick diameter rings and welded cons
|
$25.10
-
$71.45
|
|
Mfr.
Sea-Dog
| Mfr No. 080095
Machined AISI 304 Stainless. These U-bolts have SAE N/C threads. Outer mounting plate is held in place by unique, adjustable, finished nuts. Plate
|
$36.19
|
|
Mfr.
Sea-Dog
| Mfr No. 080506-1
Machined AISI 304 Stainless. These eyebolts have metric threads. Items ending with -1 part number are sold individually packaged, oth
|
$35.02
|
|
Mfr.
Sea-Dog
316 stainless steel base with strong, corrosion resistant, 17.4PH stainless steel D-ring.
|
$23.95
-
$43.55
|
|
Mfr.
Wichard
Drop Forged from 316L Stainless Steel for Greater Strength and Safety. Note: final breaking load will also be determined by the strength and integr
|
$25.50
-
$61.91
|
|
Mfr.
Wichard
Drop Forged Stainless Steel
|
$46.05
-
$89.47
|
|
Mfr.
Wichard
Drop-Forged Stainless Steel
|
$24.97
-
$125.29
|
|
Mfr.
Wichard
316 Stainless Steel - Metric Thread. Made of passivated 316L stainless steel for exceptional rust and corrosion resistance. Drop forging eliminate
|
$21.56
-
$76.20
|
|
Mfr.
Wichard
Drop Forged Stainless Steel
|
$161.13
-
$188.00
|
|
Mfr.
Wichard
Watertight With No Sealants. A significant advancement in U-bolt technology, the watertight rubber collar means no noise, no leaking and no vibrat
|
$23.75
-
$85.26
|
|
Mfr.
Wichard
| Mfr No. 06584
Drop-Forged Stainless Steel
|
$37.95
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
|
Products: 1 - 50 of 50
|
Page:
1
|
|
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|