INDMAR Direct Replacement Manifolds by Barr

CHV-1-83 Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years.

20-0082 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.

20-0100 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.

20-0102 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Replaces Indmar # 532009.

1-0104P Adapter package for fresh water cooled manifold (includes gaskets and block off plate).

1-0105 Center riser manifold-to-riser gasket for fresh water cooling.

1-0106P Adapter package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).

1-0107 Center riser manifold-to-riser gasket (raw water cooling).

20-0082P Riser mounting package for both 20-0082 and 20-0100.

20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured.

20-0085P Straight exhaust adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0086P 90 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0088P 30 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0089P 30 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3" I.D. exhaust hose.

20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.

CHV-1-83P Manifold mounting package (includes bolts and pipe plugs).

CHV-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured.

CHV-27-0083 Alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.

CHV-47-0000 Manifold to cylinder head gasket.

Note:
Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold.

CHVA-1-84 Water cooled center discharge manifold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years.

20-0082 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.

20-0100 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.

1-0104P Adapter package for fresh water cooled manifold (includes gaskets and block off plate).

1-0105 Center riser manifold-to-riser gasket for fresh water cooling.

1-0106P Adapter package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).

1-0107 Center riser manifold-to-riser gasket (raw water cooling).

20-0082P Riser mounting package for both 20-0082 and 20-0100.

20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured.

20-0085P Straight exhaust adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0086P 90 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0087P 90 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3" I.D. exhaust hose.

20-0088P 30 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0089P 30 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3" I.D. exhaust hose.

20-0092P 45 degree exhaust elbow adapter (includes adapter, hose and clamps) For use with 3" I.D. exhaust hose.

20-0093P 90 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose.

20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.

CHVA-1-84SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured.

CHVA-47-0000 Manifold to cylinder head gasket.

Note:
Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold.

FM-1-83 Water cooled center discharge manifold to fit the small block Ford engine (3/4" N.P.T. cooling hose connections). All years.

20-0082 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose.

20-0100 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose.

20-0102 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Replaces Indmar # 532009

1-0104P Adapter package for fresh water cooled manifold (includes gaskets and block off plate).

1-0105 Center riser manifold-to-riser gasket for fresh water cooling.

1-0106P Adapter package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).

1-0107 Center riser manifold-to-riser gasket (raw water cooling).

20-0082P Riser mounting package for both 20-0082 and 20-0100.

20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured.

20-0084P Straight exhaust adapter (includes adapter, hose and clamps). For use with 3-1/2" I.D.> exhaust hose.

20-0085P Straight exhaust adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0086P 90 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0087P 90 degree exhaust elbow adapter (includes adapter, hose and clamps).

20-0088P 30 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0089P 30 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3" I.D. exhaust hose.

20-0092P 45 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3" I.D. exhaust hose.

20-0093P 90 degree exhaust elbow adapter (includes adapter, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust

20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking.

FM-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured.

FM-47-0000 Manifold to cylinder head gasket.

Note:
Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold.