Free Shipping on Orders $99+
Contact Us
Orders Product Guides
Boat Parts Worldwide

You are here: Home > Shopping Guides > Rub Rails

Boat Rub Rail by Tessilmare

If you are looking for an easy-to-install rub rail that provides a seamless finish, look no further than Tessilmare. rub rail radial

RADIAL RUB RAIL REPLACEMENT KIT

Fast and easy to install, Radial is the PVC fender profile with no rivals. Differently from all the profiles available on the market, Radial can be fitted cold in just few steps. The soft part is supplied in coils cut upon request (according to the boat perimeter), to avoid waste and unaesthetic interruptions. Furthermore it is produced in the same colour of the boats gelcoat, to better satisfy customers needs.

ADVANTAGES

one piece
  • One continuous piece - no aesthetical interruption
  • Ships standard shipping methods - no costly freight fees
  • Easy replacment: saving 2/3 of assembling time

BENDING

beding rub rail

  • Very high bending adaptability
  • Perfect hull adhesion
  • Aestheticially beautiful value

JUNCTION

rub rail junction

Elegant and convenient PVC and steel matching top and end caps will give the finishing touch to transoms and to the boat sizes.

Radial Fitting Phases

  1. RIGID TRACK INSTALLATION
    Cold screwing or riveting the rigid track without any special tool. The track bends perfectly in the three boat directions, installation is quick and easy. Track hand bending, no need to heat up the profile.
    Step 1
  2. SOFT PROFILE INSTALLATION
    The soft pvc profile is installed cold, no need for any special tool or preheating. The track bends perfectly in any direction all around the boat and there is no waste or unsightly joint.Step 2
  3. END CAP INSTALLATION
    Cutting the profile. Installation of PVC or stainless steel end and top caps.Step 3
other rub rail