Spun Polyester 3-Strand Line

Mfr. New England Ropes

$0.24 - $0.87 Same construction as New England Ropes standard 3-strand polyester but with added spun fiber for a softer hand Use for halyards, control lines or sheets High tenacity polyester for durability All yarns are pre-positioned and tension set ensuring the line will remain supplle thoughout its useful life Holds knots well Spliceable Similar Products

Part No.	Mfr No.	Unit	Leaves Warehouse*	List Price	Your Price Price	Qty.
Spun Polyester 3-Strand Line 3/16"
161780	7230-06-01200	Foot	In-Stock (Ships In: 1 - 2 Days)	$0.26	$0.24
Spun Polyester 3-Strand Line 1/4"
161781	7230-08-01200	Foot	In-Stock (Ships In: 1 - 2 Days)	$0.29	$0.27
Spun Polyester 3-Strand Line 5/16"
161782	7230-10-00600	Foot	In-Stock (Ships In: 1 - 2 Days)	$0.55	$0.43
Spun Polyester 3-Strand Line 3/8"
161783	7230-12-00600	Foot	In-Stock (Ships In: 1 - 2 Days)	$0.60	$0.48
Spun Polyester 3-Strand Line 7/16"
161784	7230-14-00600	Foot	In-Stock (Ships In: 1 - 2 Days)	$0.93	$0.86
Spun Polyester 3-Strand Line 1/2"
161788	7230-16-00600	Foot	In-Stock (Ships In: 1 - 2 Days)	$0.94	$0.87
*LEAVES WAREHOUSE: Does not include Weekends and Holidays. When will my order arrive? Add the Estimated Leaves Warehouse Time + Estimated Shipping Time.

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil.

Heat:
Polyester melts at 480°F with progressive strength loss above 300°F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.