Free Shipping on Orders $99+
Contact Us
Orders Product Guides
Boat Parts Worldwide

Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot

Mfr. Shields Marine Hose

Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot

Shields 200 Series Marine Exhaust & Water Hose without reinforcement wire is designed for use 1n boat wet exhaust and engine water line systems. 200 series hose meets SAE J2006. Shields 200 Series uses premium fabric reinforcement.

  • Meets SAE J2006
  • Temperature Range: -20° to +200°F continuous and 250°F intermittent
  • Hose to be used in marine water and wet exhaust applications
  • Use where wire support is unnecessary
  • Heavy wall construction reinforced with 2 plies of tough synthetic spiral cord (4 piles in hose over 8" dia.)
Note: Enter number of feet desired in the "Qty" box

Hose over 2-1/2" diameter over 6' may require freight shipping and/or a bulk order of 25' roll.

Note: These hoses are cut to customer length and are Not Returnable. Please See Return Policy.
For larger quantities or large diameter hose a freight quote may be required due to shipping restrictions. Our shipping Department will contact you immediately if there is any issue.

$7.95 - $39.36

Additional Description
Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F to +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards.
Shipping Info

How much does shipping cost?

If you'd like to see your shipping cost, add the item to your "Shopping Barge" and then use our Shipping Rates Calculator on the next page.

Returns / Exchanges

For Go2marine's shipping and return policy, click here.

Review and FAQ Center

Shields 200 Series, Exhaust / Water Hose, No Wire, Sold by Inch

I am looking to buy 10 inches of the Shields 200 series exhaust/water hose but I notice it sells by the inch, so do I put 10 in the quantity box if I want 10 inches? Is there a different spot to specify the length I want to order?

Submitted by: clint franklin

Yes, you would enter a quantity of 10 for items in this family.

Shields 200 Series, Exhaust/Water Hose, No Wire 3-3/4"

This hose should be 3 3/4" and you sell by the inch. Not sure how to order. Please advise as to how to order this. I need 3 3/4" and the description says as much.

Submitted by: Barbara

You buy as many inches long of the 3-3/4" ID hose as you need.


Name / Nickname:


Type of Submission:


Tips on Reviewing:
  • How you use the product
  • What you like about this product
  • How can this product be improved
  • When asking about Engine Parts, please include: Year, Make, Model and Serial Number of engine or part

Please do not include: personal information, profanity or copyrighted works. Conditions of Use
pid: 198419F