Hypalon Glue Kit, 2-Part For Hypalon Boats

Do not try to glue items onto your dinghy in the rain, on the dock or in very high humidity. Glue and water don’t mix.

• Step 1 - Determine where to locate the davit heads on the swim platform, beware of support brackets underneath.
• Step 2 - Mark the inflatable where the davit heads will line up with the mounting pad on the dinghy. See figure #1. The pads should be placed as far apart on the dinghy as possible. The bottom of the pad goes at the top of the rub strip. The dinghy is inflated.
• Step 3 - The inflatable must be wiped down with the proper cleaner prior to gluing on the rubber pads. Match the cleaner to the type of glue you will be using. Incompatible glue and cleaner will cause the pad to loosen.
• Step 4 - Inflatables made from hypalon require a good two-part hypalon glue such as Weaver 2001, Bostick 2402 or Apollo 2990 for proper gluing and Acetone, MEK or Toluene as a cleaner. Boats made from a PVC derivative such as the Zodiac will require special urethane glue such as Weaver 3001 or Apollo 3026 and MEK or Acetone cleaner.
• CAUTION: Do not glue the pads on in the sun, by the water, or in high humidity. Do not sand or grind the surface of a PVC boat
Shipping Info

How much does shipping cost?

If you'd like to see your shipping cost, add the item to your "Shopping Barge" and then use our Shipping Rates Calculator on the next page.

Returns / Exchanges

For Go2marine's shipping and return policy, click here.