Jabsco, Par Max 3' Pressure Controlled Pump 12V DC, 31600-0092. Efficient, high-flow, self-priming pump serving 3 or more outlets.
Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage.
Connections: for 13mm (1/2”) bore hose or Hep20 push-fit connectors CW193
Dimensions: 220mm long, 105mm wide, 100mm high
Fuse Size: 10 amp
Output: 13 litres/minute (2.9 gallons/minute) open flow
Pressure Switch: Cuts in at 1.4bar (20psi) - cuts out at 2.8bar (40psi)
Supplied with snap-in ports for hose or Hep20 connectors
Motor protected by automatic thermal overload cut-out
Daer Sirs, I have 32 ft boat Piantoni Onda Azzuro. Till now I had installed a Water pump Par-Mate 2,5 GPM model 44010-2910 & acumulator tank 1 litre model 1.2573.2000. Because the system is frozen, I need to replace pump and acumulator. I would ask you for advise which pump and acumulator and would ask you for an offer. For additional information don’t hesitate to ask or by e-mail or by phone. Best regards, Iztok
Submitted by: Iztok Kisovar
The replacement items are located at each link below.
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
Submit a review and you will automatically be entered into our monthly drawing.
Winners will receive a $25 Gift Certificate good at Go2marine.com. Make sure to enter in your email address so that we can contact you. Winners will be announced on our Twitter & Facebook Page.
(We keep your email address private.)
KEEP IN TOUCH
Mon. - Fri. 6AM to 5PM, Pacific Time Contact Us About Us