Jabsco, PAR-Max 3 Water Pressure System Pump, 12 volt, 31600-0092. Efficient, high-flow, self-priming pump serving 3 or more outlets.
Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage.
Connections: for 13mm (1/2”) bore hose or Hep20 push-fit connectors CW193
Dimensions: 220mm long, 105mm wide, 100mm high
Fuse Size: 10 amp
Output: 13 litres/minute (2.9 gpm) open flow
Pressure Switch: Cuts in at 1.4bar (20 psi) - cuts out at 2.8bar (40 psi)
Supplied with snap-in ports for hose or Hep20 connectors
Motor protected by automatic thermal overload cut-out
Daer Sirs, I have 32 ft boat Piantoni Onda Azzuro. Till now I had installed a Water pump Par-Mate 2,5 GPM model 44010-2910 & acumulator tank 1 litre model 1.2573.2000. Because the system is frozen, I need to replace pump and acumulator. I would ask you for advise which pump and acumulator and would ask you for an offer. For additional information don’t hesitate to ask or by e-mail or by phone. Best regards, Iztok
Submitted by: Iztok Kisovar
The replacement items are located at each link below.