|
|
Ask. Answer. Discuss...Post a question or comment about .
|
Mfr.
Z-Spar
Splash Zone Compound, A-788. Can be mixed and applied underwater and will cure underwater as well as in the air. This product also stands up to heat, vibration and fuel for the vehicle racing...
|
$51.22
-
$199.83
|
|
Mfr.
3M
3M, 5200 Adhesive / Sealant. A one-part, high strength, polyurethane that chemically reacts with moisture to deliver strong, flexible bonds...
|
$9.38
-
$22.26
|
|
Mfr.
West System
- Medium-viscosity epoxy curing agent
- Not intended for clear coating
- Used at lower temperatures and to produce a rapid cure that develops it
...
|
$20.10
-
$153.17
|
|
Mfr.
West System
...
|
$38.93
-
$390.80
|
|
Mfr.
West System
- For general coating and bonding applications
- Use in extremely warm and/or humid conditions or when extended working time is desired at room temperature
...
|
$33.55
-
$242.51
|
|
Mfr.
West System
- Low-viscosity epoxy curing agent
- Not intended for clear coating
- Use when extended working and cure time is needed or to provide adequate working
...
|
$20.10
-
$44.29
|
|
Mfr.
West System
- For coating applications where an exceptionally clear layer is needed
- Great when natural wood finish is desired
- Used for laminating veneers where
...
|
$38.15
-
$260.78
|
|
Mfr.
West System
| Mfr No. 105-K
West System Fiberglass Boat Repair Kit
|
$25.97
|
|
Mfr.
3M
| Mfr No. 076308-03694
Polyester Finishing Resin. A superior quality multi-use resin ideal for all do-it-yourself repairs. Use it to repair, resurface, and rebuild hous
|
$59.68
|
|
Mfr.
3M
| Mfr No. 051593-01171
Premium Polyester Body Filler. 3M Marson Platinum Premium Fillers with adhesion promoters, offer the very best in all-around performance. 3M's pr
|
$53.28
|
|
Mfr.
MAS Epoxies
- All purpose Resin
- Used for: Filleting / Fairing, Laminating, Gluing, Cold Molding, Barrier Coating
- Mix with an appropriate MAS Hardener in a 2:1 Ra
...
|
$36.10
-
$3,337.18
|
|
Mfr.
MAS Epoxies
Used for wetting through fiberglass and other structural fabrics. Mix with an appropriate MAS Hardener in a 2:1 ratio of Resin:Hardener Sold Seperately...
|
$39.19
-
$3,337.18
|
|
Mfr.
MAS Epoxies
After mixing, Medium Hardener gives 4 hours of working time @ 70°F. Overnight Sandability. Resistant to Blushing. Good UV Stability...
|
$30.94
-
$2,590.50
|
|
Mfr.
MAS Epoxies
- After mixing, Slow Hardener gives 4 hours of working time @ 70°F
- Blush Free
- Recoat within 36 hours without washing/sanding the surface
...
|
$30.94
-
$2,590.50
|
|
Mfr.
3M
A two-component vinyl ester filler formulated with a unique, easy to sand Scotchlite™ Glass Bubbles.
Designed for marine filling and fairing appl
|
$26.47
-
$157.75
|
|
Mfr.
3M
| Mfr No. 051135-08155
3M Quick Fix Adhesive is a strong, rapid-bonding, convenient-to-use adhesive. It has excellent adhesion to most rubber, weather-stripping, vinyl, met
|
$26.58
|
|
Mfr.
Hi Bond
Hi Bond, Boat Yard Polyester Resin. A general purpose polyester resin...
|
$16.11
-
$33.00
|
|
Mfr.
Hi Bond
Hi Bond, Epoxy Glue Kit. Epoxy based glue with a high viscosity "Vaseline-like" consistency...
|
$16.49
-
$29.84
|
|
Mfr.
3M
| Mfr No. 076308-00592
Polyester Glazing and Finishing Putty. 3M's Dynatron Putty-Cote is a smooth, tack-free, easy-sanding polyester glazing and finishing putty. Putt
|
$31.88
|
|
Mfr.
3M
Water-Based. A water dispersed, high-strength, non-flammable contact adhesive. Has high-coverage, a long-bonding range, and good heat resistance.
|
$44.84
-
$125.11
|
|
Mfr.
3M
| Mfr No. 051131-06025
This paste compound is designed to quickly remove P600 dual action or P1000 wet sanding scratches from production gel coat. It has a
|
$79.41
|
|
Mfr.
3M
A two-component vinyl-ester filler formulated with short strand fiberglass for blister and other semistructural repairs
|
$42.72
-
$175.92
|
|
Mfr.
3M
| Mfr No. 076308-16055
3M Laminex Fairing is a lightweight, semi-flexible polyester compound, excellent for fairing⁄smoothing applications i
|
$200.74
|
|
Mfr.
3M
| Mfr No. 051115-11590
Adhesive-Backed Flexible, Graphite-Based Intumescent Rolled Wrap. Used in conjunction with caulks and sealants to fill in the voids around and be
|
$553.63
|
|
Mfr.
3M
| Mfr No. 05801
3M, Lightweight Body Filler, Polyester. Lightweight polyester body filler which cures to a tack-free state in 15 to 20 minutes...
|
$27.88
|
|
Mfr.
3M
| Mfr No. 021200-14558
High Strength, Multi-Purpose Tape. These open-cell urethane foam tapes are soft, conformable and offer excell
|
$94.16
|
|
Mfr.
3M
| Mfr No. 051135-08191
Epoxy Syringe Set and Application Gun. Two-part, clear epoxy that delivers strong, durable bonds within minutes after application. Makes diffic
|
$174.09
|
|
Mfr.
3M
| Mfr No. 021200-41548
2-Part Adhesives in Convenient Pre-Measured Cartridges. Designed for use with
|
$125.86
|
|
Mfr.
3M
| Mfr No. 051115-25523
Thick Acrylic Foam with Very High Bond Strength Acrylic Adhesive. VHB Tapes provide the convenience and simplicity of a fastener in tape
|
$50.08
|
|
Mfr.
3M
| Mfr No. 021200-82456
Bonds in Seconds; Fills Gaps. Scotch-Weld Hot Melt Adhesives liquify when heated and quickly fill gaps and wet the bondin
|
$242.78
|
|
Mfr.
3M
| Mfr No. 051131-05887
2-Part Automix Cartridge. Excellent for creating coves and radii on surfaces that tend to flex - such as cabin to deck joints.
|
$50.83
|
|
Mfr.
3M
3M - Fastbond Contact Adhesive, Neutral Color. 3M Fastbond is a contact adhesive used for bonding decorative laminates, aluminum, steel, wallboard, plywood, panels, wood and wood veneer...
|
$31.93
-
$92.79
|
|
Mfr.
Bels/Smith
Clear Penetrating Epoxy Sealer (CPES) consists of a tough, flexible resin system in a solvent blend which dissolves the sap, oil and moisture found in wood...
|
$11.11
-
$184.97
|
|
Mfr.
Eclectic
Easy mixing, Pour the small container into the large container and stir Thick, smooth, graphite black coating with superior abrasion resistance Working time of 30 minutes at 7...
|
$22.08
-
$68.58
|
|
Mfr.
Eclectic
- Extra working time for difficult repairs
- Fills holes, cracks to any size or depth
- Treat dry rot areas
- Repairs metals, wood, concrete, and ceram
...
|
$13.21
-
$25.36
|
|
Mfr.
Evercoat
| Mfr No. 105501
Evercoat, Boaters Choice Resin. A general purpose polyester resin. It has wax in it for a tack free finish. Includes MEKP hardener...
|
$40.09
|
|
Mfr.
Evercoat
| Mfr No. 8015
Repair manifolds, out drives, trim tabs, exhausts, fuel lines, tanks, etc.. Hardens in 20-30 minutes. Cures underwater. Can be sanded, painted, drilled, tapped and filed
|
$11.39
|
|
Mfr.
Evercoat
Evercoat, Formula 27, White Plastic Filler, Repair. Permanent repair of fiberglass, wood, metal, stucco and drywall...
|
$10.18
-
$23.43
|
|
Mfr.
Evercoat
Evercoat, Premium Marine Resin. The perfect no-run, no-sag polyester resin for marine repairs...
|
$16.60
-
$69.93
|
|
Mfr.
McNett
| Mfr No. 10114
McNett, Aquaseal, Permanent & Flexible Rubber Repair. Whether you are stuck with a deflated whitewater raft on the shore of the Colorado River...
|
$6.95
|
|
Mfr.
McNett
| Mfr No. 10410
McNett, Freesole, Permanent Rubber Repair, Flexible, Wear Resistant. McNett has heard from all kinds of people, and not only runners, praising the virtues of Freesole...
|
$8.46
|
|
Mfr.
Pettit
| Mfr No. 7076
FlexPoxy Flexible Repair & Construction Epoxy 7076.
FlexPoxy is a two-part epoxy resin that does not sag, run, or shrink. The thick formula allows it to fill large cavities in a single application...
|
$35.57
|
|
Mfr.
Quicksilver by Mercury
| Mfr No. 86166Q1
Mercury Marine, Bellows Adhesive. Used on all Mercruiser bellows. Creates a watertight seal with clamping surface...
|
$10.33
|
|
Mfr.
Vetus
| Mfr No. BOATFIX1
Vetus, Boatfix Adhesive. Excellent adhesion on laminated plastics such as Formica, hard P.V.C. and ABS...
|
$52.77
|
|
Mfr.
Weaver Industries
PVC or Hypalon Repair Glue, 2 Part. In a 8 oz size for gluing on rubber pads onto inflatables made from Hypalon or PVC material...
|
$32.63
-
$32.63
|
|
Mfr.
3M
| Mfr No. 054007-49518
Wire Marker Tape Dispenser and Refill Numbers. Provides a fast, convenient system for marking wire, cable, or vacuum hoses. Using the special end
|
$55.56
|
|
Mfr.
3M
| Mfr No. 021200-83502
A Supported Synthetic Rubber Sealant in Ribbon Form. Offers a watertight, gasket-like seal in many applications such as bedding glass, around windo
|
$72.21
|
|
Mfr.
Evercoat
| Mfr No. 100519
A general purpose polyester resin. Economical. Thixotropic. Has excellent wettability and good strength. Hardener inclu
|
$217.71
|
|
|
Mfr.
Evercoat
Fine quality 6 oz. fiberglass fabric. Becomes transparent when completely saturated with resin. High strength and desig
|
$403.42
-
$458.12
|
|
Mfr.
Evercoat
| Mfr No. 100945
100% 1.5 oz. fiberglass in a non-woven state. For bulk build up when repairing holes and badly damaged areas. Also mold
|
$470.66
|
Above is the price you will be charged if you purchase this item(s). We do not show this price on the advertised page
because your price is below the manufacturer's suggested advertised price.
Post a question or comment about to our online boating community.
Thank you for submitting your review. Submissions are typically posted within 2 business days, pending approval.
Thank you for your submission. Most questions and comments are typically posted with a response within 2 business days.
|
|
|
