SNAPP Disposable Fuel Filter/Water Separator With Bracket and Drain - 23106-10

The Parker Racor SNAPP™ Marine Fuel Filter/Water Separator is a compact, quick service filter with premium filtration capabilities. The patented bracket system and quick connect fittings make element change-outs both easy and tool free. At just four inches wide with 2 to 2-1/2 inch bolt spacing, the SNAPP™ filter and bracket fits anywhere and protects everywhere. Designed for engines with a fuel flow rate up to 26 gph (100 lph), the SNAPP™ filter is installed in the fuel line between the tank and the engine. The filter literally “snaps” into its stainless steel mounting bracket. Included quick connect couplings allow for fast connection to fuel lines. The inlet and outlet ports can be positioned as necessary by simply flipping the SNAPP™ filter in the bracket. The SNAPP™ fuel filter features Aquabloc® media inside for the highest performance contaminant and water removal available. The SNAPP™ is one piece high impact nylon construction with a permanent stainless steel mounting bracket and resists rust and corrosion in marine environments. The clear collection bowl allows at-a-glance inspection of fuel quality with an option for a self-vent drain to easily remove collected water.

UOM:
EA

Filter rating:
10 micron

Bowl Type:
With self vent drain

Maximum Flow:
26 gph (100 lph)

Replacement Element:
R23107-10

Width:
3.8 Inch (97 mm) at bracket

Trade Name:
SNAPP™

Series:
SNAPP™

Configuration Type:
First fit

Inch/Metric:
Inch

Port Size:
3/8 Inch (9.5 mm)


Height:
7.8 Inch (198 mm)

Depth:
4.1 Inch (104 mm)

Water Sump Capacity:
3.4 oz. (100 ml)

Bracket Material:
Coated Steel

Quick-Connect Fittings:
3/8 Inch (9.5 mm) (per SAE)

Parker Group:
Filtration

Water Removal Efficiency:
0.99

Parker Division:
Racor

Pressure Rating:
50 psi (3.5 bar)

Operating Temperature:
-20 F to 150 F (-29 C to 66 C)

Application:
E10 gasoline, diesel, bio-diesel and wherever small engines are hard at work.