Description
- Flow rate: Nominal 83 gpm (314 Liters/min) at 1,750 rpm
- Self-priming from dry up to 7.8' (2.4m)
- Constructed from marine quality bronze and stainless steel for ruggedness and reliability
- Inexpensive to buy and operate, easy to service and maintain
- Will tolerate abrasive wear
- Handles hard and soft solids without clogging
- Can pump in either direction
- Will not airlock
- Body: Bronze
- Impeller: Neoprene or Nitrile
- Wearplate: Replaceable
- Shaft: Stainless steel
- Shaft Seal: Carbon/ceramic mechanical type
- Bearings: Twin single row, ball type
- Port Type: 2" NPT
- Clutch Type: Electro-magnetic 12 or 24 volt
- Pulley: 7" (178mm) 'A' or 'B' section
- Weight: 29 lb (13.2kg)
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dockside pump.
INDUSTRIAL: Circulating and transferring, Velocitymixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations, and truck installation under hood for emergency pumping.
Product Specs and Installation Instructions and Diagrams
Additional Information
For more information, visit P65Warnings.ca.gov
Warranty: The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase. Return: All returns must be recevied within 30 days of receipt. Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.