DESCRIPTION
- High-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions
- May be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage
- Clear amber and becomes virtually invisible when varnished
- Outstanding adhesion and permanence on a wide variety of materials
- Mixed at a ratio of 1:1 by volume
- Will cure at temperatures as low as 35 Deg. F
- Unaffected by water, oil, kerosene, and many other chemicals when fully cured
- Immune to fungus and rot
- May be applied to damp wood, if worked well into the surface
SPECS
RELATED ITEMS
PRODUCT REVIEWS
Ratings & Reviews
2 reviews
Good Stuff
by Michael
Good stuff. Mixes 1:1 so It's very user friendly. And the viscosity is thick so it's ready for general gluing of joints. Add a little sanding dust to make a filler. I like it.
Good Epoxy
by Ken
This is good epoxy for bonding a variety of materials. I've used it for fiberglass and plywood. It takes a long while to cure, but, that creates a stronger bond and gives you more working time.
PRODUCT FAQs
SHIPPING & RETURNS
Warranty:
The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase.
Return:
All returns must be recevied within 30 days of receipt.
Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
Please contact us for Manufacture Defects, Returns and help with Warranties.