Trim Tab System, 12" x 9", w/ Euro Style Control

Mfr: Bennett Marine
$648.25
Trim Tab System, 12" x 9", w/ Euro Style Control
SKU: 154072
|
Mfg# 129E
|
LFS# BEN129E
|
UNIT: Pair
Size: 12" x 9"Mount Style: Transom
Out of stock - Typically Available in 3 - 6 Weeks

Bennett Trim Tabs, 9" and 12" Chord. All kits are transom mount with a Euro-Style Rocker Switch Control.

Complete kit contains

  • Trim tabs, hydraulic power unit, actuating cylinders
  • All necessary wiring, tubing, hardware
  • One page installation instruction


    • Performance:
    • Increases speed, reduces pounding, corrects listing, eliminates porpoising, offsets prop torque


    Efficiency:
  • Reduces fuel consumption, reduces engine laboring, eliminates squatting
  • Most boats are designed to plane at a particular speed and weight distribution. However, as weight increases (due to additional fuel, passengers, or gear) and/or speed decreases, the stern settles down creating an inefficient, untrimmed condition. As the boat pushes forward, it creates a "hill of water." In this bow-high position visibility is limited and the hull bottom is pounded. In addition, due to significant hull drag and extreme prop angle, fuel economy is poor. Properly sized Bennett Trim Tabs enable your boat to overcome this "hill" and plane at speeds slower than designed planing speed.

    As the helm control is pressed, the stern rises, lowering the bow. Without touching the throttle, speed increases and optimum attitude is achieved regardless of spe(more...)

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review

    "

    Warranty:

    Bennett warrants to the original purchaser and subsequent owners, that Bennett will repair or replace, at the discretion of Bennett, any part or component manufactured by Bennett which is proven to the satisfaction of Bennett to be defective, and which failure has occurred under normal use and within the warranty period. This Limited Warranty does not apply to Products that have been damaged, or which fail, as a result of causes other than manufacturing defects (such as but not limited to electrical overloads, electrolysis, casualty, fire, collision, improper installation, lack of maintenance, exposure to elements, alteration, or misuse). This warranty does not cover damage to finishes. The warranty commences from the first date a Product is purchased by the customer. If the product is installed on a boat by an OEM then the warranty commences on the first day on which the first retail customer purchases the boat. This warranty applies exclusively to products purchased and used in the United States.

    Return:

    • All returns must be recevied within 30 days of receipt.
    • Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
    • Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.

    "