Post a question or comment about Windshield Hardware to our online boating community.
windsheild door latch
how do you replace a broken door latch for the windshield that is riveted on the door?
Submitted by: chas
You will have to either drill out or grind the rivets out, then either re-rivet or bolt the new ones in.
I have a 1984 Seahawk with push out at the bottom openings. I need the rods that hold the window open, they are plastic with a single connect point at the windshield. They have a rounded shaft that twists to lock them open.
Submitted by: KIM WEGNER
Here is a link to our hatch lifts, you can see if any are similar to the ones you have or will work for you.
1994 Crownline 196BR
I am looking for the wing-vent window assembly for both sides of a 1994 Crownline 196BR. I will need the glass the extruded aluminum hinge and gaskets as well as the side vent adjuster? I have contacted Crownline and Taylormade products with no help from either company; I was hoping that maybe you would have some sort of suggestion?
Submitted by: James
Taylor made is the only company we know that does glass and that would have been my referral.
I have a 2009 Crownline 220 EX and I am missing the windshield mechanism
I have a 2009 Crownline 220 EX and I am missing the windshield mechanism on the "moving side" of the windshield. It is a walkthrough bow and the stationary side of the latch is in tack, it is the other side that is misssing. It appears is was rod
Submitted by: Lawrence
Your best bet is to contact a Crownline dealer for that item
1987 Monark fish & ski rod holder...
I am looking for the black rod holder that mounts between the seats on the console. It is near the factory drink cup holders and is approximately 3" long, mounts flat with 4 screws. Do you have any suggestions?
Submitted by: James
We have a wide selection of Rod Holders to chose from in stainless and ABS, with a vairety of mounts styles also.
Show older >>