Free Shipping on Orders $99+
Contact Us
Orders Product Guides
Boat Parts Worldwide

Electrical Wire & Wiring Supplies for Boats by Ancor

Products: 1 - 50 of 66
Page:  1 | 2   Next >
Ancor, Single and Double Crimp Nylon Insulated Butt Connectors

Ancor, Single and Double Crimp Nylon Insulated Butt Connectors

Mfr. Ancor

Ancor, Single and Double Crimp Nylon Insulated Butt Connectors
$2.29 - $185.68

View Details
Tinned Copper Primary Wire

Tinned Copper Primary Wire

Mfr. Ancor

Tinned copper Primary wire with stranding for maximum protection against corrosion and electrolysis. This ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing...
$5.87 - $189.95

View Details
Ancor Marine Grade White Signal Wire, 20/2 x 1'

Ancor Marine Grade White Signal Wire, 20/2 x 1'

Mfr. Ancor | Mfr No. 122050 by ft.

Ancor Marine Grade White Signal Wire, 20/2 x 1'...
$0.52


View Details
Safety Duplex Boat Cable, Flat, White over Red and Yellow

Safety Duplex Boat Cable, Flat, White over Red and Yellow

Mfr. Ancor

Ancor Safety Duplex Boat Cable, Flat, White over Red and Yellow. Ancor boat cable wire is made to surpass the highest UL boat cable standards...
$0.42 - $337.26

View Details
Triplex Boat Cable, Flat

Triplex Boat Cable, Flat

Mfr. Ancor

Tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexi...
$55.95 - $150.00

View Details
Ancor - Battery Cable

Ancor - Battery Cable

Mfr. Ancor

Tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flex...
$9.24 - $299.45

View Details
Ancor, Adhesive Lined Heat Shrink Ring Terminals

Ancor, Adhesive Lined Heat Shrink Ring Terminals

Mfr. Ancor

Adhesive Lined. Ancor provides a full line of adhesive-lined heat shrink products to enviromentally seal electrical connections. T
$3.29 - $56.52

View Details
Ancor, Adhesive Lined Heat Shrink Flanged Spade Terminals, (25)

Ancor, Adhesive Lined Heat Shrink Flanged Spade Terminals, (25)

Mfr. Ancor

Adhesive Lined Fork Terminals. The flanged tips of these terminals makes it less likely for them to slip off the stud accidentally under
$3.10 - $26.50

View Details
Ancor, Double Crimp Nylon Insulated Ring Terminals

Ancor, Double Crimp Nylon Insulated Ring Terminals

Mfr. Ancor

Tinned copper for maximum corrosion resistance and greatest electrical conductivity. Grooved barrel grips wire to provide superior holding power and current ...
$2.38 - $26.69

View Details
Ancor, Double Crimp Fully Insulated Disconnects

Ancor, Double Crimp Fully Insulated Disconnects

Mfr. Ancor

Tinned copper for maximum corrosion resistance and greatest electrical conductivity. Grooved barrel grips wire to provide superior holding power and current...
$2.56 - $31.38

View Details
Ancor, Double Crimp Nylon Insulated Disconnects

Ancor, Double Crimp Nylon Insulated Disconnects

Mfr. Ancor

Tinned copper for maximum corrosion resistance and greatest electrical conductivity. Grooved barrel grips wire to provide superior holding power and current flow...
$2.38 - $12.68

View Details
Ancor, Double Crimp Nylon Insulated Flanged Spade Terminals

Ancor, Double Crimp Nylon Insulated Flanged Spade Terminals

Mfr. Ancor

Nylon Insulated Forked Terminals. The flanged tips of these terminals makes it less likely for them to slip off the stud accidentally under margina
$2.88 - $22.80

View Details
Ancor, 16 - 14 ga. Double Crimp Nylon Insulated Multi-Stack Disconnects (100)

Ancor, 16 - 14 ga. Double Crimp Nylon Insulated Multi-Stack Disconnects (100)

Mfr. Ancor | Mfr No. 220612

Spade Disconnect Terminals - Nylon. Nylon insulted; double crimp. Tinned copper. 0.250" Tab. Sold by the package
$25.79


View Details
Ancor, Reducing Butt Connectors

Ancor, Reducing Butt Connectors

Mfr. Ancor

Vinyl Insulated. Used to join a pair of conductors to a third, all of the same size or two conductors of different sizes. The smaller end is banded
$4.33 - $24.76

View Details
Ancor, Standard Battery Cable Assembly

Ancor, Standard Battery Cable Assembly

Mfr. Ancor

Tinned Marine Battery Cable. Ancor™ marine grade heavy duty battery cables are pre-assembled with heavy duty tinned copper lug
$19.17 - $38.98

View Details
Vinyl Insulated Butt Connectors

Vinyl Insulated Butt Connectors

Mfr. Ancor

Deep serrations in barrel grip wire to exceed UL specifications. Highest grade electrolytic copper, tin plated for greatest corrosion resistance and least p...
$2.38 - $23.88

View Details
Ancor Black Split Wire Loom

Ancor Black Split Wire Loom

Mfr. Ancor

Ancor Black Split Wire Loom. Split loom has excellent heat resistance, flexibility and crush resistance. Excellent for bundling wires...
$5.26 - $9.39

View Details
Ancor, Adhesive Lined Heat Shrink Butt Connectors

Ancor, Adhesive Lined Heat Shrink Butt Connectors

Mfr. Ancor

Ancor, Adhesive Lined Heat Shrink Butt Connectors. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief...
$3.33 - $48.63

View Details
Ancor, Marine Grade Wiring Spiral Wrap

Ancor, Marine Grade Wiring Spiral Wrap

Mfr. Ancor

Ancor, Marine Grade Wiring Spiral Wrap. Permits flexible routing of cable harnesses...
$7.19 - $98.25

View Details
Ancor, Adhesive Lined Heat Shrink Wire Disconnects

Ancor, Adhesive Lined Heat Shrink Wire Disconnects

Mfr. Ancor

Ancor, Adhesive Lined Heat Shrink Wire Disconnects. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Nylon insulator, prefer
$4.12 - $87.75

View Details
Ancor Wire Control Cushion Clamp of Nylon Covered Stainless Steel, Pack of 10

Ancor Wire Control Cushion Clamp of Nylon Covered Stainless Steel, Pack of 10

Mfr. Ancor

Ancor Wire Control Cushion Clamps are Nylon Covered Stainless Steel to protect and organize your boat's wiring. The annealed stainless band and the EPDM nylon insulator are corrosion...
$8.88 - $24.09

View Details
Ancor, Heavy Duty Lugs, 100% Tinned Copper

Ancor, Heavy Duty Lugs, 100% Tinned Copper

Mfr. Ancor

100% Tinned Copper. Heavy duty, pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum
$1.76 - $71.33

View Details
Assorted Nylon Cable Clamps

Assorted Nylon Cable Clamps

Mfr. Ancor

Marine GradeTM Cable Clamps. Made from nylon for maximum strength. Resistant to solvents, oils, acids and moisture...
$3.84 - $8.70

View Details
Heavy Duty Adhesive Lined Heat Shrink Tubing

Heavy Duty Adhesive Lined Heat Shrink Tubing

Mfr. Ancor

Heat Activated Adhesive Lining Provides Seal for electrical connections on your boat. The cross linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC...
$8.20 - $21.54

View Details
Heavy Duty Adhesive Lined Heat Shrink Tubing

Heavy Duty Adhesive Lined Heat Shrink Tubing

Mfr. Ancor

Heat Activated Adhesive Lining Provides Seal for electrical connections on your boat. The cross linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC...
$9.28 - $23.24

View Details
RG 8X Coaxial Cable

RG 8X Coaxial Cable

Mfr. Ancor | Mfr No. 151510

Ancor, RG 8XCoaxial Cable uses 96% braid for best single strength and least interference...
$73.77


View Details
Ancor, Liquid Tight Wire Seals

Ancor, Liquid Tight Wire Seals

Mfr. Ancor

Perfect for wire and hoses. Provides low cost watertight cable entries into panels and junction boxes. Works with round cable. Simple to in...
$5.59 - $16.46

View Details
Ancor, Adhesive Lined Heat Shrink Tubing (ALT)

Ancor, Adhesive Lined Heat Shrink Tubing (ALT)

Mfr. Ancor

Cross linked polyolefin tubing is much stronger than PVC tubing. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight...
$2.17 - $30.22

View Details
Assortment Grommets

Assortment Grommets

Mfr. Ancor | Mfr No. 750000

Includes 45 nylon flexible, black grommets. Six popular hole sizes from 1/4" to 3/4"...
$13.25


View Details
Ancor Marine Grade Electrical Wire Grommets, 3/8" or 1/2", Black, 5-Pack

Ancor Marine Grade Electrical Wire Grommets, 3/8" or 1/2", Black, 5-Pack

Mfr. Ancor | Mfr No. 760375

Ancor Marine Grade Electrical Wire Grommets, 3/8" or 1/2", Black, 5-Pack...
Not Currently Available

View Details
Ancor, Multi-Stack Connectors

Ancor, Multi-Stack Connectors

Mfr. Ancor | Mfr No. 230612

Nylon insulated Multi Connector. Wire range of 16-14 ga. 1/4" tab...
$2.66


View Details
Double Male / Female Connectors

Double Male / Female Connectors

Mfr. Ancor | Mfr No. 230613

Uninsulated connector, 1/4" tab
$3.90


View Details
Insulated Snap Plugs

Insulated Snap Plugs

Mfr. Ancor

Ancor, Insulated Snap Plugs
$2.29 - $22.41

View Details
Ancor, Stainless Steel Cut, Strip & Crimp Tool

Ancor, Stainless Steel Cut, Strip & Crimp Tool

Mfr. Ancor | Mfr No. 701009

Crimp 10-22 AWG insulated and non-insulated terminals and coaxial connectors . Cut and strip 8-22 AWG solid and 10-24 AWG stranded wire .
$27.64


View Details
Ancor, Double Crimp Ratchet Tool, 26-10 AWG

Ancor, Double Crimp Ratchet Tool, 26-10 AWG

Mfr. Ancor | Mfr No. 703050

Ancor, Double Crimp Ratchet Tool, 26-10 AWG...
$165.27


View Details
Ancor, Cut, Strip & Crimp Tool

Ancor, Cut, Strip & Crimp Tool

Mfr. Ancor | Mfr No. 701007

This tool has precision ground cutters and stripping station with a wide crimp range of insulated and non-insulated terminals. "Box" cri
$37.14


View Details
Ancor, Pro Torch

Ancor, Pro Torch

Mfr. Ancor | Mfr No. 702060

Piezo electronic ignition system. Up to 120 minutes use on each filling. Powerful wind resistant flame. Sturdy heavy duty ribbed aluminum body w
$58.42


View Details
Automatic Wire Stripper

Automatic Wire Stripper

Mfr. Ancor | Mfr No. 702030

German made of fiberglass reinforced polyamide - automatically adjusts to different wire sizes . Strips without damage or marking of conductors . Slim ja...
$46.82


View Details
Battery Cable Stripper

Battery Cable Stripper

Mfr. Ancor | Mfr No. 702065

German made of fiberglass reinforced polyamide . Swivel blade allows for circular and lengthwise cuts . Adjustable blade cutting height...
$19.16


View Details
Ancor, Black Spiral Wrap

Ancor, Black Spiral Wrap

Mfr. Ancor | Mfr No. 452385

Permits flexible routing of cable harnesses. Provides abrasion protection for wire and cable. Allows lead outs at any point for greatest ease
$0.64


View Details
Ancor, Double Crimp Nylon Insulated Ring Terminals

Ancor, Double Crimp Nylon Insulated Ring Terminals

Mfr. Ancor

Nylon Insulated with Insulation Grip (Funnel Entry). Ring terminals are tinned copper for maximum corrosion resistance and greate
$18.05 - $27.40

View Details
Ancor, 120 Piece Wire Connector Kit, without Tool

Ancor, 120 Piece Wire Connector Kit, without Tool

Mfr. Ancor | Mfr No. 220003

Ancor, 120 Piece Wire Connector Kit, without Tool, Assorted Butt, Ring, Spade and Male, Female Disconnects (18–10 AWG)
$31.07


View Details
Ancor, Wire Connector Kit with Cut/Strip/Crimp Tool

Ancor, Wire Connector Kit with Cut/Strip/Crimp Tool

Mfr. Ancor | Mfr No. 220002

Features the most popular assorted butt, ring, spade, and male & female disconnects. Nylon insulation, tinned copper conn
$18.58


View Details
Ancor, Double Female Coaxial Cable Fitting, 200258

Ancor, Double Female Coaxial Cable Fitting, 200258

Mfr. Ancor | Mfr No. 200258

Ancor, Double Female Coaxial Cable Fitting, 200258...
$5.41


View Details
Mini Pocket Butane Torch

Mini Pocket Butane Torch

Mfr. Ancor | Mfr No. 702024

Electronic ignition system with safety locking switch, Flame temperature up to 1,300°C (2,500°F). Windproof flame...
Not Currently Available

View Details
Ancor Coaxial Male Plug, Straight, PL259

Ancor Coaxial Male Plug, Straight, PL259

Mfr. Ancor | Mfr No. 200259

Ancor Coaxial Male Plug, Straight, PL259
$4.78


View Details
Nylon 3-way Connector, 16-14 ga.

Nylon 3-way Connector, 16-14 ga.

Mfr. Ancor | Mfr No. 230510

Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and...
Not Currently Available

View Details
Nylon Splice Connector, 18-14 ga.

Nylon Splice Connector, 18-14 ga.

Mfr. Ancor | Mfr No. 230615

Quick splices are easy to install as no wire stripping is needed. They are used for splicing a new wire into an existing wire and provide a fast and dependable connection.
$2.38


View Details
Flat Duplex Cable

Flat Duplex Cable

Mfr. Ancor

Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards.
$44.47 - $78.00

View Details
Duplex Boat Cable, Flat, White over Red and Black

Duplex Boat Cable, Flat, White over Red and Black

Mfr. Ancor | Mfr No. 121910

Ancor Duplex Boat Cable, Flat, White over Red and Black. Ancor boat cable wire is made to surpass the highest UL boat cable standards...
$35.31


View Details
Products: 1 - 50 of 66
Page:  1 | 2   Next >

Ask. Answer. Discuss.
Post a question or comment about Electrical Wire & Wiring Supplies for Boats to our online boating community.
Question
Wire Corrosion

My friend is telling me that electricity mainly travels along the outside surface of a wire. This is very hard be believe….why would electrons not move thoughout the complete cross section of a wire. Thus corrosion on the outer surface of a single strand wire could potentially cut of the flow of electricity.
Is this baloney or what??

Submitted by: Steve
Answer

It depends on what type of electric current you are talking of.

In case of AC current,the inductance decreases from center towards the surface of the wire. As current flows through the path of least resistance, it flows through the surface of the wire which provides path of least Reactance. This phenomena where current flows through the surface due to least reactance is known as "Skin effect".

While in case of DC current the inductance part is missing as there is no change in flux with respect to time. So the resistance is same through out the conductor. Hence DC current flows through out the wire cross-section.

If,you visit any power GRID you’ll see the bus bars are hollow. This is because current flows through the outer surface so bars are kept hollow to carry same current, avoiding material wastage.


 
Name / Nickname:

Email:
(optional)


Type of Submission:

Subject:

Message:
Tips on Reviewing:
  • How you use the product
  • What you like about this product
  • How can this product be improved
  • When asking about Engine Parts, please include: Year, Make, Model and Serial Number of engine or part

Please do not include: personal information, profanity or copyrighted works. Conditions of Use