Chris Craft Direct Replacement Manifolds by Barr
If you do not see the product available on our web site, give us a call and we most likely can order it for you.
CHRIS CRAFT V8-283, 302, 305, 307 and 350 C.I.D
ALL MODELS LOG STYLE DIRECT REPLACEMENT
MANIFOLD NOT TO BE USED IN 3 PASS PLUMBING SYSTEMS!
MANIFOLD NOT TO BE USED IN 3 PASS PLUMBING SYSTEMS!
Part Number and DescriptionCC-1-07686Direct replacement water cooled 16.20-07686. CC-20-08288 Direct replacement port side riser. CC-20-08289 Direct replacement starboard side riser. CC-1-07686P Manifold mounting package. CC-6-80Pressure relief valve adaptor package for use with Chris Craft direct replacement as needed CC-20-07593 Riser/deflector plate. Replaces Chris Craft part #16.20-07593 (Order (2) of the appropriate gaskets according to your requirements). CC-20-07605 Direct replacement exhaust elbow. CC-20-0828P Exhaust riser mounting package. CC47-1650-05944 End cap gasket for all models except 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements). CC47-1650-06022 End cap gasket for 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements). CC47-1650-07290 Pressure relief valve housing gasket. CC47-1650-07596 Riser/deflector plate gasket. Also requires gasket CC47-1650-07597 (Order (2) of the appropriate gaskets according to your requirements). CC47-1650-07597 Riser/tail pipe gasket. Also requires gasket CC47-1650-07596 (Order (2) of the appropriate gaskets according to your requirements). CC47-1650-07681 Adaptor/tail pipe gasket for 283 C.I.D. with flywheel forward (Order 2) of the appropriate gaskets according to your requirements). CHV-47-0000 Manifold to cylinder head gasket. Note: Manifold includes all mounting hardware to head, gaskets and plugs. Risers include mounting gaskets and plugs only. Order CC-20-0828P to mount riser to manifold ((2) required per engine). |
CHRIS CRAFT V8-283, 302, 305, 307, 327 and 350 C.I.D.
ALL MODELS GENERIC
Part Number and Description1-0012LAdaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) left side. Requires Chris Craft adaptor part #16.20-07602 (port side). 1-0012R Adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) right side. Requires Chris Craft adaptor part #16.20-07064 (starboard side). 1-0283A Adaptor for Chris Craft V8 283, 302, 305, 307, 327 and 350 C.I.D. Manifolds, Models F, G, and K (two pass manifold system). Not pictured. 1-0283L Adaptor for Chris Craft V8 283, 302, 305, 307, 327 and 350 C.I.D. ManiFolds, Model Q (single pass manifold system) left side. 20-0000 Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8" to 3" I.D. exhaust hose. 20-0002P Mounting hardware kit. 20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2" to 3" I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. 20-0034 or 20-0035 Exhaust connector #20-0035 (for 2 1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). Connects to #20-0039 using (1) #20-0002P per connector. 20-0039 Fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2) mounting hardware kits #20-0002P (1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser). Use for Models F, G, K, and Q; requires (1) CC-6-80 package. 20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2" or 3" I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. CC-6-80 Pressure relief valve adaptor package for Chris Craft V8 Models F, G, K, and Q. Use with #20-0039 riser. CC47-1650-05944 End cap gasket for all models except 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements). CC47-1650-06022 End gasket for 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements) |
CHRIS CRAFT V8-283, 302, 305, 307, 327 and 350 C.I.D.
ALL MODELS CENTER RISER GENERIC
Part Number and DescriptionCHV-1-83Water cooled center discharge manifold to fit the small block GM engine (3/4" N.P.T. cooling hose connections). All years. 20-0082 Water cooled center discharge riser (3/4" N.P.T. cooling hose coNnection). Standard for use with 3" I.D. exhaust hose. 20-0100 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. 1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 1-0107 Center riser manifold-to-riser gasket (raw water cooling). 20-0082P Riser mounting package for both 20-0082 and 20-0100. 20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose. 20-0086P90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose. 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose. 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. CC-27-79 Alternator bracket. Use where engine water pump is mounted on the starboard side of the engine. CHV-1-83P Manifold mounting package (includes bolts and pipe plugs). CHV-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured. CHV-27-0083 Alternator bracket. Use where engine water pump is mounted on port side of engine below alternator. CHV-47-0000Manifold to cylinder head gasket. Note: Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold. |
CHRIS CRAFT V8-454 C.I.D.
ALL MODELS CENTER RISE GENERIC
Part Number and DescriptionCHVA-1-84Water cooled center discharge maniFold to fit the big block GM engine (3/4" N.P.T. cooling hose connections). All years. 20-0082 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3" I.D. exhaust hose. 20-0100 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 4" I.D. exhaust hose. 1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 1-0107 Center riser manifold-to-riser gasket (raw water cooling). 20-0082P Riser mounting package for both 20-0082 and 20-0100. 20-0082SS-P Stainless steel mounting package with brass plugs) for both 20-0082 and 20-0100. Not pictured. 20-0084PStraight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2" I.D. exhaust hose. 20-0085P Straight exhaust adaptor (includes 20 0087P adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose. 20-0086P 90 degree exhaust elbow adapt 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). 20 0093P For use with 3" I.D. exhaust hose. 20 0092P 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2" I.D. exhaust hose. 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose. 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3" I.D. exhaust hose. 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2" or 4" I.D. exhaust hose. 20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4" pipe plug). Capable of stacking. CHVA-1-84P Manifold mounting package (includes bolts and pipe plugs). CHVA-1-84SS-P Stainless steel manifold mounting CHVA-47-0000 Manifold to cylinder head gasket. Note: Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold. |