Chrysler Direct Replacement Manifolds by Barr
If you do not see the product available on our web site, give us a call and we most likely can order it for you.CHRYSLER V8-273, 318, 340 and 360 C.I.D.
ALL MODELS. 1986 AND UP CENTER RISER DIRECT REPLACEMENT
Part Number and DescriptionCM-1-4417063 Water cooled center discharge exhaust manifold to fit the small block Chrysler (1/2" N.P.T. cooling hose connections). Used during years 1986 and later. 534005 Generic riser designed to be mounted to the original Chrysler center riser exhaust manifold (for use with 3" I.D. exhaust hose/3/4" N.P.T. cooling hose connection). 534002 Adaptor kit (sold as shown) to fit the original Chrysler center riser exhaust manifold to the Barr style riser (part #534005). Adaptor must be used for CM 1 4417063 Barr style riser. 534004 Riser gasket for raw water cooled manifolds (installed between manifold and adaptor plate). 50-512-018 1/2" N.P.T. X 3/4" hose (straight barb) brass fitting. 50-512-019 3/4" N.P.T. X 3/4" hose (straight barb) brass fitting. 50-525-018 1/2" N.P.T. X 3/4" hose (90 degree) brass fitting 50-525-019 3/4" N.P.T. X 3/4" hose (90 degree) brass fitting. CM47-4417127 Riser gasket for raw water cooled manifolds (installed between adaptor 534005 plate and riser). CM47-4417232 Riser gasket for fresh water cooled manifolds (installed between manifold and adaptor plate). Note: Manifold includes all mounting hardware, gaskets and plugs. |
CHRYSLER V8-273, 318, 340 and 360 C.I.D.
ALL MODELS. 1966 AND UP LOG STYLE DIRECT REPLACEMENT
Part Number and DescriptionCM-1-6672A Direct replacement water cooled manifold for model years 1966 to 1972. CM-1-6677A Direct replacement water cooled manifold for model years 1973 to 1986. CM-20-2600402 Exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402. CM-20-2847405 90 degree exhaust elbow. Direct re-placement for Chrysler part #’s 2847405 and 2469639. CM-20-4142411 Exhaust riser/upper elbow. Direct replacement for Chrysler part #’s 3745639, 2847623, 2487404 and E9233M. CM-20-6672 Fully jacketed 20 degree exhaust elbow. CM 20 2847405 Accepts 3" I.D. exhaust hose. Direct replacement for Chrysler part # 3527794. Will mount directly to manifold or can be used with riser # CM-20-6674. CM-20-6674 Fully jacketed exhaust riser. 6" riser protection. Direct replacement for Chrysler part # 2846689. CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. CM-1-6672B Front end plate without the water CM 20 2600402 connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page). Order the appropriate end flanges and fittings according to your requirements. CM-1-6672C Adapter for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold. CM-1-6672E Copper water distribution tube, (1) CM 1 6672C CM 1 6672H required per manifold. Replaces original tube (Chrysler part # 3527781) where used. Will fit both manifold styles. CM-1-6672H Front end plate with 1/2" N.P.T. water connection. For use where water connection is made from the front of the manifold. Will replace Chrysler part # 3527869, (1) required per manifold. May require mounting kit # CM-1-6672B-P (show on next page). Will fit both manifold styles. CM-1-6677P Manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements). CM-1-6677SS-P Stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs). Not pictured. CM-20-6672P Mounting kit for exhaust elbow connector for raw water cooled manifold (includes bolts, gasket and pipe plug). Note: CM-1-6672A, CM-1-6677A, CM-20-6672, CM-20-6674 and CM-20-2847405 include all mounting hardware, gaskets and plugs. Swivel-style connector packages must be purchased separate for the corresponding riser/elbows. See associated page for part numbers. |
CHRYSLER V8-273, 318, 340 and 360 C.I.D.
ALL MODELS. 1966 AND UP LOG STYLE DIRECT REPLACEMENT
Part Number and DescriptionCM-1-6672D End flange gasket for raw water cooled manifolds, (2) required per manifold. Replaces Chrysler part # 2847480. Will fit both manifold styles. CM-1-6672J End flange gasket for fresh water cooled manifolds, (1) required per exhaust end. Will fit both manifold styles. CM-1-6672P Manifold to cylinder head gasket set, (1) required per engine. Replaces Chrysler part # 3745220. Will fit both manifold styles. CM-20-1947617 Exhaust elbow extension retainer. CM-20-2600402P Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs). CM-20-2847405P Mounting kit for exhaust elbow (includes bolts, gasket and pipe plugs). CM-20-4142411P Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs). CM-20-6672J-P Mounting kit for exhaust elbow connector for fresh water cooled manifold (includes bolts, gasket, and pipe plugs). CM-20-6674J-P Mounting kit for exhaust riser for fresh water cooled manifold (includes bolts, gasket and pipe plug). CM-20-6674P Mounting kit for raw water cooled manifold (includes bolts, gasket and pipe plugs). CM-20-9232P Mounting kit for 6" extension (includes sleeve, O-rings, retainers and bolts). CM-20-9224 Exhaust to elbow extension retainer sleeve. CM-20-9225 Exhaust to elbow extension inner seal. CM-20-9226 Exhaust to elbow extension outer seal. CM-50-115729 Stainless steel exhaust manifold stud NUT. CM-50-602593 Stainless steel exhaust manifold stud. |
CHRYSLER V8-361, 383, 400, 426 and 440 C.I.D
ALL MODELS. 1959 AND UP LOG STYLE DIRECT REPLACEMENT
Part Number and DescriptionCM-1-5972ADirect replacement water cooled manifold for big block Chrysler. CM-20-4142411 Exhaust riser/upper elbow. Direct Replacement for Chrysler part #’s 3745639, 2847623, 2847404 and E9233M. CM-20-9232 6" exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. CM-20-9234 Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M. 1-0007 Adaptor for rear end of manifold. Use with Barr style exhaust risers or elbow connectors. 1-00672 1/2" N.P.T. threaded exhaust end plate. CM-1-5972B Direct replacement front end plate. CM-1-5972C End plate gasket, (2) required per manifold. CM-1-5972D Copper water distribution tube. Replaces original tube where used. CM-1-5972G-P Manifold to cylinder head mounting kit (includes bolts, manifold to head gaskets and brass drain plug). CM-1-5972P Manifold to cylinder head mounting gasket set. CM-1-5972SS-P Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and brass drain plugs). CM-20-1947617 Exhaust elbow extension retainer. CM-20-4142411P Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs). CM-20-9224 Exhaust elbow to extension seal retainer sleeve. CM-20-9225 Exhaust elbow to extension inner seal. CM-20-9226 Exhaust elbow to extension outer seal. CM-20-9232P Mounting kit for 6" extension (includes sleeve, O-rings, clamps and bolts). CM-20-9234P Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs). CM-50-114942 Stainless steel exhaust manifold stud nut. CM-50-5023040 Stainless steel exhaust manifold stud. Note: Manifold includes gaskets and plugs. Swivel-style connector packages must be purchased separate for the corresponding riser/elbows. Manifold mounting hardware must be purchased separately. |