DESCRIPTION
Lectrotab's Manual Leveling LED control incorporates features requested by boat owners to provide a user-friendly control for a more enjoyable boating experience.
- Single button touch control
- Automatic tab position return
- Sleek bezel design
|
FEATURES
SPECIFICATIONS
Model Number | Display Color | Number of Stations/Actuators | Overall Width | Overall Height / Thickness | Mounting Hole Cutout (Diameter) | DC Voltage | Fuse Size Power Input (1 Actuator per Tab) | Fuse Size Terminal 7(Must Connect) |
---|---|---|---|---|---|---|---|---|
MLC-1 | Black | Single Station/1 Actuator/tab(2 tab system) | 3.15"/80mm | 3.0"/77mm-.437"/11mm | 2"/50mm | 12/24 | 12vdc = 15 or 20 amp 24 vdc = 10 amp | 1 to 2 amp |
MLC-1 PROGRAMMING
Program Mode Sequence | ||||||
---|---|---|---|---|---|---|
Setting | Enter | Change Setting | Change Setting Value | Setting Value | Default | Program Details |
(1L) Auto Retract | Press Bow Down and Bow Up 4 sec. | Press/Release Port Bow Side Down | Press/Release Stbd Bow Down | R1 = Standard R2 = Last Tab Set | R1 | R1=Standard Auto Retract R2=Return to last tab position before key switch off |
(2L) Actuator Stroke Time | Press Bow Down and Bow Up 4 sec. | Press/Release Port Bow Side Down | Press/Release Stbd Bow Down | R1=4sec, R2=5sec., R3=6s, R4=7s, R5=8s | R5 | Change setting value to match actuator stroke time to fully deploy |
(3L) Swap LED tracking | Press Bow Down and Bow Up 4 sec. | Press/Release Port Bow Side Down | Press/Release Stbd Bow Down | R1 = LEDs track tab position R2 = LEDs track button press | R1 | R1=LEDs track angle of tab position R2=LEDs track same side as button being pressed |
|
Enter, Adjust and Exit Program Mode:
- Before entering program mode, 12vdc or 24vdc must be applied to MLC terminals 1, 2 and 7 (see wiring)
- Press and hold Bow Down (top) button and Bow Up (bottom) button for 4 seconds to enter program mode
- LED L1 (top left LED) will begin flashing and LED R1 (top right LED) will be lit constantly
- Press and release the Port Side Down (left) button to cycle through the three settings under "Setting"
- Press and release the Starboard Side Down (right) button to change the "Setting Value"
- Press and hold Bow Down (top) button and Bow Up (bottom) button for 4 seconds to exit and save new value
RELATED ITEMS
PRODUCT REVIEWS
PRODUCT FAQs
SHIPPING & RETURNS