Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID

Mfr: Shields Marine Hose
$7.50 to $11.25
Sold by the foot. Enter the total length in the quantity box and we will cut off the total length in one continuous piece.
3 Reviews
Back
$7.50 to $11.25

DESCRIPTION

Shields 200 Series Marine Exhaust & Water Hose without reinforcement wire is designed for use 1n boat wet exhaust and engine water line systems. 200 series hose meets SAE J2006. Shields 200 Series uses premium fabric reinforcement.

  • Meets SAE J2006
  • Temperature Range: -20 Deg. to +200 Deg. F continuous and 250 Deg. F intermittent
  • Hose to be used in marine water and wet exhaust applications
  • Use where wire support is unnecessary
  • Heavy wall construction reinforced with 2 plies of tough synthetic spiral cord (4 piles in hose over 8" dia.)
  • 3" Max Length is 12' -- can be cut in half to go UPS/FedEx -- Call for cuts.
Note: Enter number of feet desired in the "Qty" box

 

Hose over 2" diameter or over 6' may require freight shipping and/or a bulk order of 25' roll.

Note: These hoses are cut to customer length and are Not Returnable. Please .
For larger quantities or large diameter hose a freight quote may be required due to shipping restrictions. Our shipping Department will contact you immediately if there is any issue.

Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20 Deg. F to +200 Deg. F continuous, +250 Deg. F intermittent. The hose meets SAE J2006 Type R1 standards.

SPECS

Item #
MPN
Inside Diameter
Outside Diameter
Weight per 100'
Sold By
Enter Total Qty Needed in Qty Box
Shields 200 Series, Exhaust / Water Hose, No Wire, 1", per Foot
Item #:533129-1"
MPN:16-200-1000-12
Inside Diameter: 1"
Outside Diameter: 1-3/8"
Weight per 100': 48 lbs.
Sold By: Foot
Enter Total Qty Needed in Qty Box: We ship one continuous length based on the total quantity unless notated in notes at checkout. (Length restrictions may apply).
Shields 200 Series, Exhaust / Water Hose, No Wire, 2", per Foot
Item #:533129-2"
MPN:16-200-2000-12
Inside Diameter: 2"
Outside Diameter: 2-31/64"
Weight per 100': 102 lbs.
Sold By: Foot
Enter Total Qty Needed in Qty Box: We ship one continuous length based on the total quantity unless notated in notes at checkout. (Length restrictions may apply).
Shields 200 Series, Exhaust / Water Hose, No Wire, 1-1/8", per Foot
Item #:533129-1-1/8"
MPN:16-200-1180-12
Inside Diameter: 1-1/8"
Outside Diameter: 1-1/2_
Weight per 100': 52 lbs.
Sold By: Foot
Enter Total Qty Needed in Qty Box: We ship one continuous length based on the total quantity unless notated in notes at checkout. (Length restrictions may apply).

RELATED ITEMS

PRODUCT REVIEWS

Back

Ratings & Reviews

3 reviews

  • 4 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
Write a Review

William Wright

by

1st time customer. So far so good.

Was this review helpful?

Sent wrong hose.

by

Ordered the 200 series hose with NO wire, was sent the hose WITH wire. I made it work but didn’t need the wire. It was a lot harder to work with. Otherwise shopping was fast and easy purchase.

Was this review helpful?

PRODUCT FAQs

SHIPPING & RETURNS

Warranty:

The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.

Return:

  • All returns must be recevied within 30 days of receipt of the order.
  • All cut product are non-returnable

  • Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
  • Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.