Z-Spar Splash Zone A-788 Kit, Underwater Two-Part Epoxy Putty

Mfr: Pettit Paint
$47.94 to $186.89
$47.94 to $186.89

A-788 Splash Zone 2-part epoxy compound has near magical properties and has been dubbed the duct tape of the marine world. Splash Zone epoxy fits the needs of boaters, marinas, coastal home owners and even race engine builders! Splash Zone A-788 can be mixed, applied AND cured underwater as well as in the air.

A-788 Splash Zone cures to an extremely hard, abrasion and impact resistant patching compound. It applies like putty to seal, fill, patch, or re-build aluminum, wood, concrete, fiberglass, and steel. Splash Zone can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, and more. Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood. Splash Zone’s rock-hard surface can be drilled, tapped, or machined. Pettit recommends it for patching and repairing damaged underwater surfaces. It has been used for racing vehicles since it also stands up to heat, vibration and fuel on intake manifolds.


Additiona information:
MIXING INSTRUCTIONS: Mix by hand. (Some people may be sensitive to epoxy or polyamide resins - wear tight fitting rubber gloves). Keep hands and material wet with water during mixing. Scoop a quantity of one component from can by hand. Scoop out an approximately equal quantity of the other component. Mix and knead material by hand until the yellow and black components have combined to make a uniform olive-green color. Apply immediately after mixing; no sweat-in time is required before using.

Z-Spar A-788 Splash Zone Compound was originally designed to provide protection against corrosion of metals and erosion and deterioration of concrete and wood at, above and below the waterline in splash zones. It is not only used on steel or wood piling, and pier supports, but also as a coating repair of boat hulls and buoys, on bridge abutments, and on any surface subject to erosion and corrosion in salt or fresh water. It is used for many patching and grouting applications that are not submerged, and on surfaces which subsequently are buried in soil

A-788 Splash Zone is an extremely hard, abrasion and impact resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch, or repair aluminum, wood, concrete, fiberglass, and steel. It can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, and more. Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood. Splash ZoneÕs rock-hard surface can be drilled, tapped, or machined.Recommended for patching and repairing damaged underwater surfaces. Not for use in potable water.

Item #
MPN
Description
Kit Size
Splash Zone, Underwater Epoxy Putty, 1 Quart Kit, 1 Pint Part A - 1 Pint Part B
Item #:532176-1qt
MPN:A788 Q
Description: Splash Zone
Kit Size: 1 Quart Kit
Splash Zone, Underwater Epoxy Putty, 2 Quart Kit (1/2 Gallon), 1 Qt Part A - 1 QT Part B
Item #:532176-1/2gal
MPN:A788-4
Description: Splash Zone
Kit Size: 1/2 Gallon Kit
Splash Zone, Underwater Epoxy Putty, 2 Gallon Kit, 1 Gal Part A - 1 Gal Part B
Item #:532176-2gal
MPN:A788 1
Description: Splash Zone
Kit Size: 2 Gallon Kit

Ratings & Reviews

No reviews available

Be the first to Write a Review

Warranty:

The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.

Return:

  • All returns must be recevied within 30 days of receipt of the order.
  • Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
  • Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.