• Home
  • Interceptor Direct Replacement Manifolds by Barr

Interceptor Direct Replacement Manifolds by Barr

If you do not see the product you need on our web site, give us a call and we can most likely order it for you.

INTERCEPTOR V8-239, 256, 272, 292 and 312 C.I.D.

Models 125, 135, 150, 170, 185 and 215 H.P. LOG STYLE GENERIC

Part Number and Description


INT-1-5457L Water cooled exhaust manifold (port side) for the Ford engine. Use with

INT-1-5457R Water cooled exhaust manifold (starboard) for the Ford engine. Use withBarr risers and exhaust connectors.The original Interceptor exhaust connectors are not applicable to the Barr manifolds.

1-0022 End plate gasket (will fit both ends).
INT-1-5457P Manifold to cylinder head mounting KIT.

20-0000 Swivel-type high discharge exhaust riser; 8-1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2-7/8" to 3" I.D. exhaust hose.

20-0002P Mounting hardware kit (Barr style riser/elbows only).

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2-1/2" to 3" I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow.

20-0034 or 20-0035 Exhaust connector #20-0035 (for 2-1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exHaust hose). Connects to #20-0039using (1) #20-0002P per connector.

20-0039 Fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2)mounting hardware kits #20-0002P(1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034or 20-0035 to riser).

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2-1/2" or 3" I.D. exhaust hose. Requires (1) mounting hardware kit#20-0002P per elbow.

INTERCEPTOR V8-221, 260 and 289 C.I.D.

Models 120, 140, 165, 190, 200 and 210 H.P. LOG STYLE GENERIC

Part Number and Description


INT-1-6268L Water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds.

INT-1-6268R Water cooled exhaust manifold (starboard for the Ford engine. Use with the Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds.

1-0022 End plate gasket (will fit both ends

INT-1-6268P Manifold to cylinder head mounting kit.


20-0000 Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8" to 3" I.D. exhaust hose.

20-0002P Mounting hardware kit (Barr style riser/elbows only).

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2-1/2" to 3" I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow.

20-0034 or 20-0035 Exhaust connector #20-0035 (for2-1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). Connects to #20-0039using (1) #20-0002P per connector.

20-0039 Fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2)mounting hardware kits #20-0002P(1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034or 20-0035 to riser).

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2-1/2" or 3" I.D. exhaust hose. Requires (1) mounting hardware kit#20-0002P per elbow

INTERCEPTOR V8-352, 390 and 427 C.I.D.

Models 240, 250, 260, 285, and 300 H.P. LOG STYLE GENERIC

Part Number and Description


INT-1-58L Water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds.

INT-1-58R Water cooled exhaust manifold (starboard) for the Ford engine. Use withBarr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds.

1-0019 End plate gasket (will fit both ends).

INT-1-58P Manifold to cylinder head mounting kit.

20-0000 Swivel-type high discharge exhaust riser; 8 1/2" riser protection. Requires(1) mounting hardware kit#20-0002P per riser. Use only with2 7/8" to 3" I.D. exhaust hose.

20-0002P Mounting hardware kit (Barr style riser/elbows only).

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2-1/2" to 3" I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow

20-0034 or 20-0035 Exhaust connector #20-0035 (for
2-1/2" I.D. exhaust hose) or exhaust connector #20-0034 (for 3" I.D. exhaust hose). Connects to #20-0039using (1) #20-0002P per connector.

20-0039 Fully jacketed swivel-type exhaust riser; 7" riser protection. Requires (2)mounting hardware kits #20-0002P(1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034or 20-0035 to riser).

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts2-1/2" or 3" I.D. exhaust hose. Requires (1) mounting hardware kit#20-0002P per elbow.

INTERCEPTOR V8-221. 260, 289, 302 and C.I.D.

ALL MODELS CENTER RISER GENERIC

Part Number and Description


FM-1-83 Water cooled center discharge manifold to fit the small block Ford engine(3/4" N.P.T. cooling hose connections). All years.

20-0082 Water cooled center discharge riser (3/4" N.P.T. cooling hose connection). Standard for use with 3"I.D. exhaust hose.

20-0100 Water cooled center discharge riser(3/4" N.P.T. cooling hose coNnection). Standard for use with 4" I.D. exhaust hose.

1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate).

1-0105 Center riser manifold-to-riser gasket or fresh water cooling.

1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole).

1-0107 Center riser manifold-to-riser gasket (raw water cooling).

20-0082P Riser mounting package for both20-0082 and 20-0100.

20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082and 20-0100. Not pictured.

20-0084P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3-1/2" I.D. exhaust hose.

20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2-1/2" I.D. exhaust hose.

20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps).For use with 2-1/2" I.D. exhaust hose.

20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps).For use with 3" I.D. exhaust hose.

20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps).For use with 2-1/2" I.D. exhaust hose.

20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps).For use with 3" I.D. exhaust hose.

20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps).For use with 3" I.D. exhaust hose.

20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps).For use with 3-1/2" or 4" I.D. exhaust HOSE.

20-0097 3" spacer block (complete with mounting hardware, gasket and 3/4"pipe plug). Capable of stacking.

FM-1-83P Manifold mounting package (includes bolts and pipe plugs).

FM-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured.

Note:
Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold.