Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision- engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket. Actuators come in 12 and 24 VDC with 8 second recommended stroke time.
| FEATURES |
- Stainless Steel upper mounting bracket
- Reinforced actuator upper mounting boss
- Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
- Utilizes internal pressure equalization system
- Upgrades to most popular hydraulic and electromechanical systems
- Internal brake system prevents unwanted tab movement when under way or backing down
- Quiet operation
- All actuators fully load tested to push 1000 lbs of force
- Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
|
| SPECIFICATIONS |
| Model |
DC Voltage |
Stroke Length |
Stroke Time |
Distance from Bolt to Pin |
Vertical Height (Typical Installation Fully Retracted) |
Cable Length (Feet/Meter) |
Upper Mounting Bracket |
Lower Mounting Bracket |
Use Actuator w/Tabs |
| A-BK-20 |
12VDC |
2.25"/57mm |
8 sec. |
11.5"/292mm |
11.875"/302mm |
6'/1.8m |
Stainless Steel 12 gauge |
Standard |
All Tabs |
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.