Rule LoPro Series Bilge Pump, Automatic, 900 gph, 12 volt

Rule LoPro Series Automatic Bilge Pumps bring pumping power, up to 900 gph in fact, to boats challenged with tight installation spaces. Multiple operation modes give this automatic 12 volt pump flexibility for a variety of applications onboard.

LoPro 900 Series pumps work in small locations with a designed pump height of 2.3" (58.4mm). The LoPro's entire discharge body swivels up to 180 Deg. for ease of installation and the hose can swivel 360 Deg. for better routing. The threaded discharge nozzle allows the use of 3/4" (19mm), 1" (25mm), 1-1/8" (28mm) Straight Hose barb or 3/4"(19mm) 90 Deg. Elbow ports (included). An included tricuspid check valve minimizes water back flow when used with straight fittings.

The LoPro LP900S features two operating modes:

1. The Water Level Sensing Mode enables the pump to start when the water reaches the boater's choice of:
   • 2" - Good for shower boxes, very wet areas, narrow bilges, etc.
   • 1-1/4" - Good for shallow bilges, small compartments, etc.
2. The Electronic Automatic Mode allows the pump to check for water every 2-1/2 minutes
   • If water is detected, the pump stays on until the water is removed
   • If no water is detected, then the pump turns off

LoPro LP900S fe(more...)