Description
Jabsco, 1" Clutch Pump, Electro-Magnetic, Impeller, 11860 Series.
- Flow rate: Nominal 23 gpm (88 Liters/min) at 1,750 rpm
- Self-priming from dry up to 7.8' (2.4m)
- Use for bilge pumping, washdown, bait tank circulation or utility dockside pumping
- RPM speed range is 400-3,000
- Constructed from marine quality bronze and stainless steel for ruggedness and reliability
- Inexpensive to buy and operate, easy to service and maintain
- Will tolerate abrasive wear
- Handles hard and soft solids without clogging
- Can pump in either direction
- Will not airlock
- Body: bronze
- Impeller: neoprene or nitrile
- Wearplate: replaceable
- Shaft: stainless steel
- Shaft Seal: carbon / ceramic mechanical type
- Bearings: twin row, ball type
- Port Type: 1" NPT
- Pulley: 7" (178mm) 'A' or 'B' section
- Weight: 15 lb (6.8 kg)
Electromagnetic clutch can be controlled by a remote switch or set up as an automatic bilge pump using an apropriate float switch. Dry running can be avoided by intalling Jabsco model 4732-0000 vacuum switch kit.
Product Specs and Installation Instructions and Diagrams
Additional Information
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov
Warranty: The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase. Return: All returns must be recevied within 30 days of receipt. Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.