Description
- Flow rate: Nominal 4.4 gallons/min (20 Liters/min) at 1500 rpm
- Self-priming from dry up to 4.9ft (1.5m)
- Constructed from marine quality bronze and stainless steel for ruggedness and reliability
- Inexpensive to buy and operate, easy to service and maintain
- Will tolerate abrasive wear
- Handles hard and soft solids without clogging
- Can pump in either direction
- Will not airlock
- Body: Bronze
- Impeller: Neoprene, Nitrile
- Wearplate: Replaceable
- Shaft: Stainless Steel
- Shaft Seal: Lip Type
- Bearings: Sealed Ball Bearing
- Port Type: 1/4" Internal Thread
- Weight: 1-1/2 lb (0.7kg)
- Vertically oriented ports
- Do not run dry for more than 30 seconds
APPLICATIONS
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
Jabsco (PDF)
Additional Information
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov
Warranty: The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase. Return: All returns must be recevied within 30 days of receipt. Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.