Description
Replacement Filter Element for In-line Fuel Filter is a universal style element for your boat's in-line filter. Replaces any 1/4", 5/16" or 3/8" filter element.
- In-line style universal filter element replaces any 1/4", 5/16" or 3/8" filter element
- Protects all carbureted engines
- Remove fuel filter from fuel line
- Unscrew and remove the filter end marked ÒIN"
- Remove glass sleeve, magnet & spring
- Remove spindle by turning counter clockwise
- Remove the used element and discard
- Replace ÒO" rings on end caps if required (Replace only if originals are leaking or appear cracked or torn)
- Place a new element on the spindle and screw back into ÒOUT" end cap. Screw firmly to properly seat element at both ends
- Replace glass sleeve. Replace spring and then magnet on spindle
- Screw ÒIN" end cap onto spindle just slightly tighter than finger tightDo Not Over Tighten
- Replace filter in fuel line
- Start engine and check for leaks
Additional Information
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov
Warranty: SEACHOICE PRODUCTS, SEACHOICE warrants the original consumer purchaser that SEACHOICE consumer products will be free from defective materials or workmanship, under normal use and service, for a period of one 1 year from the original purchase date. Return: All returns must be recevied within 30 days of receipt of the order. Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.