Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID

Roll over image to zoom in Click on image to zoom

Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID

MPN: 16-200-1000-12 | Catalog No: SIE200100

Out of stock - Typically Available in 3 - 6 Weeks

Inside Diameter: 1" | Outside Diameter: 1-3/8" | Weight per 100': 48 lbs. | Sold By: Foot | Enter Total Qty Needed in Qty Box: We ship one continuous length based on the total quantity unless notated in notes at checkout. (Length restrictions may apply).

Inside Diameter: 1"

Variant

Price:

$7.95

Quantity:

Shields 200 Series Marine Exhaust & Water Hose without reinforcement wire is designed for use 1n boat wet exhaust and engine water line systems. 200 series hose meets SAE J2006. Shields 200 Series uses premium fabric reinforcement.

Meets SAE J2006
Temperature Range: -20 Deg. to +200 Deg. F continuous and 250 Deg. F intermittent
Hose to be used in marine water and wet exhaust applications
Use where wire support is unnecessary
Heavy wall construction reinforced with 2 plies of tough synthetic spiral cord (4 piles in hose over 8" dia.)
3" Max Length is 12' -- can be cut in half to go UPS/FedEx -- Call for cuts.

Note: Enter number of feet desired in the "Qty" box

Hose over 2" diameter or over 6' may require freight shipping and/or a bulk order of 25' roll.

Note: These hoses are cut to customer length and are Not Returnable. Please .
For larger quantities or large diameter hose a freight quote may be required due to shipping restrictions. Our shipping Department will contact you immediately if there is any issue.

Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20 Deg. F to +200 Deg. F continuous, +250 Deg. F intermittent. The hose meets SAE J2006 Type R1 standards.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit P65Warnings.ca.gov

Warranty: The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase. Return: All returns must be recevied within 30 days of receipt of the order. All cut product are non-returnable Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.

Sent wrong hose.

Ordered the 200 series hose with NO wire, was sent the hose WITH wire. I made it work but didn’t need the wire. It was a lot harder to work with. Otherwise shopping was fast and easy purchase.

Positive Experience

1st time customer. So far so good.

Positive Experience

1st time customer. So far so good.

Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID

Description

Additional Information

Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID

Customer Reviews

You may also like

Recently viewed