Description
Quick Cure-5 is the standard quick setting "five minute epoxy" system for use on smaller jobs on your boat. It's not just for your boat however, as Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not waterproof.
Quick Cure is quite thick, but is easily measured by squeezing equal sized lumps from the convenient application bottles. (Mix at a 1:1 by volume ratio.)
- Minimum Application Temperature 40° F (5 ° C)
- Ideal for all small jobs requiring a strong bond and rapid cure
- Highly water resistant but not fully waterproof
- Thick, but is easily measured by squeezing equal sized lumps from the convenient application bottles
- Mix at a convenient 1:1 by volume ratio
- Use Quick Cure for installing bungs, repairing missed staple holes prior to fiberglassing, “tack welding” wood, and for those other glue jobs, which require a fast cure
- Do not use below the water line unless protected by an over coating like SilverTip Laminating Resin, STR General Purpose Epoxy, Clear Coat, etc.
Additional Information
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov
Warranty: The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase. Return: All returns must be recevied within 30 days of receipt. Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.