Description
Put Trident's Corrugated Marine Wet Exhaust Hose 252 Series to work on your boat for longer connections that require tight bends on wet exhaust systems. Trident 252 Wet Exhaust Hose sports a color coded bright blue stripe for easy identification. The hose size and description are marked continuously in bold white letters.
- Meets SAE J2006
- Temperature Range: 200 Deg. continuous - 250 Deg. intermittent
- Use for longer connection which requires a very tight bend on marine wet exhaust systems
- Meets or exceeds USCG and ABYC requirement for type certified wet exhaust service
- Formulated to resist engine heat, exhaust fumes and ozone
- Corrugated construction with double helical wires imbedded between tough rayon spiral cord piles for tight bend radius
- Bend Radius for 3" & smaller hose is 2 x ID = approximate bend radius and for over 3" is 6 x ID = approximate bend radius
Trident recommends double clamping with 1/2" or larger S/S clamps spaced at least one clamp width apart at a minimum of 1" from end of pipe and at least one clamp width from end of hose.
NOTES:
- Sold by the indicated units:
- For sold by the foot hose enter number of feet or sections desired in the Qty. box (up to the max length)
- For 12-1/2' sections enter the number of desired pieces
- Maximum length is 12-1/2'
- 8ft length is maximum length that can ship by UPS shipping
- Cut hoses are custom items and Not Returnable
Large quantities and large diameter hose may require a freight quote due to shipping restrictions. Our Shipping Department will contact you if there are any shipping issues.
Additional Information
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov
Warranty: The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase. Return: All returns must be recevied within 30 days of receipt of the order. Cut hose is non-returnable. Returns after 30 days will be charged a 15% re-stocking Returns after 60 days will not be accepted Returns are NOT accepted on the following: Special Order items Material made to order (cut to length etc.) Hazardous items Electronics, custom boat covers, windshields and boat covers that have been opened. RGA paperwork MUST accompany the product. If a product arrives in the warehouse without a RGA #, it will be returned. RGA numbers will expire after 30 days from date of creation. Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval. Please contact us for Manufacture Defects, Returns and help with Warranties.