DESCRIPTION
- Made of Nylon 6/6 flame resistant, self extinguishing Buna-N form seal
- All seals exceed NEMA 4 x or 6 specs
- Overlapping clamping spines allow for superior pull-out protection and resistance
- Strain relief fittings are resistant to salt water, acids, alkalis, alcohol, oils and are non-corrosive for use in the marine environment
- Good underwater to 300 feet /91.4 m (150 PSIG) provided there is a liquid tight seal between body and housing
- Provide low cost cable entries into panels and junction boxes
- UL 94 v-0
- Simple to install-insert cable and tighten nut!
SPECS
Item #
MPN
Wire Range
Thread Size
Cable Diameter
Clear Hole
Body Length
Thread Length
Liquid Tight Wire Seal, Round Cable, 3/8" NPT, 18-10 AWG
Item #:531298-18-10AWG
MPN:764998
Wire Range: 18-10 AWG
Thread Size: 3/8" NPT
Cable Diameter: .08 to.24"
Clear Hole: 0.68"
Body Length: 0.87"
Thread Length: 0.59"
Liquid Tight Wire Seal, Round Cable, 3/4" NPT, 1-3/0 AWG
Item #:531298-1-3/0AWG
MPN:765004
Wire Range: 1-3/0 AWG
Thread Size: 3/4" NPT
Cable Diameter: .51 to.71"
Clear Hole: 1.05"
Body Length: 1.22"
Thread Length: 0.51"
Liquid Tight Wire Seal, Round Cable, 1/2" NPT, 10-2AWG
Item #:531298-10-2AWG
MPN:765000
Wire Range: 10-2AWG
Thread Size: 1/2" NPT
Cable Diameter: 0.05 - 0.47"
Clear Hole: 0.83"
Body Length: 1.06"
Thread Length: .51"
Liquid Tight Wire Seal, Round Cable, 1" NPT, 4/0 AWG
Item #:531298-4/0AWG
MPN:765006
Wire Range: 4/0 AWG
Thread Size: 1" NPT
Cable Diameter: .71" - .98"
Clear Hole: 1.35"
Body Length: 1.10"
Thread Length: .75"
Liquid Tight Wire Seal, Flat or Round Cable, 1/2" NPT, 4-12/3 AWG
Item #:531298-4-14/2-10/2
MPN:765002
Wire Range: 4, 14/2-10/2, 16/3-12/3 AWG
Thread Size: 1/2" NPT
Cable Diameter: .24 to.55"
Clear Hole: 0.83"
Body Length: 1.10"
Thread Length: 0.51"
RELATED ITEMS
PRODUCT REVIEWS
PRODUCT FAQs
SHIPPING & RETURNS
Warranty:
The length of the warranty may vary by product, please refer to documenation that came with your product for the exact terms and conditions of the warranty for your purchase.
Return:
All returns must be received within 30 days of receipt of the order.
Refer to our return policy for items that are not eligible to be returned (e.g. cut items, electrical components, food, paint, special order, used or installed items in non-resellable condition etc.)
Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
Please contact us for Manufacture Defects, Returns and help with Warranties.